Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 52 for “"RANS-CFD"”.

  1. Experimental and RANS-CFD Study of Nacelle Drag

    … guidance and insight into the capabilities of RANS-based CFD. The research goal was to determine whether industry constrained CFD could participate in the aerodynamic design of nacelle bodies. Grid refinement level, turbulence model and near wall treatment settings, to predict drag to the …

    queens Repository record for Experimental and RANS-CFD Study of Nacelle Drag (opens in a new tab)

  2. RANS CFD Methodologies for a PWR Fuel Rod Assembly

    This study adopts computational fluid dynamics (CFD) to examine fluid dynamics and heat transfer characteristics for turbulent flows around pressurized water reactor (PWR) fuel rod bundles with support grids. The NESTOR experiment performed by CEA-EDF-EPRI provided accurate data for various …

    tamu Repository record for RANS CFD Methodologies for a PWR Fuel Rod Assembly (opens in a new tab)

  3. Comparison of Unstructured & Structured Meshing for a Circulation Control Wing & Engine Configuration Using RANS CFD

    … NRA investigates potential advanced commercial transport designs that could be utilized in the N+2 time frame (about 2025). The basis of the advanced design revolves around a heavily researched technology called Circulation Control that will be investigated through computational and wind tunnel …

    calpoly Repository record for Comparison of Unstructured & Structured Meshing for a Circulation Control Wing & Engine Configuration Using RANS CFD (opens in a new tab)

  4. Hull Design for Fast and Efficient Round-Bilge Pure-Displacement Craft using RANS CFD and Non-Linear Optimisation

    … such lift. Producing hydrodynamic lift in the transition speed range is largely ineffective because the flow velocity and resulting forces are insufficient in relation to the mass of the vessel. Designing fast displacement hulls for such small vessels is more difficult because stability …

    auckland-ms Repository record for Hull Design for Fast and Efficient Round-Bilge Pure-Displacement Craft using RANS CFD and Non-Linear Optimisation (opens in a new tab)

  5. RANS CFD Based Analysis of Low Speed Wind Tunnel Tare and Interference and Wall Corrections for Supersonic Aircraft Configurations

    RANS CFD simulations were used to analyze the low speed wind tunnel corrections that wereapplied to the wind tunnel tests of a proposed commercial supersonic transport aircraft. The wind tunnel data used as reference and comparison for the CFD simulations was generated from the NASA SCALOS …

    washington Repository record for RANS CFD Based Analysis of Low Speed Wind Tunnel Tare and Interference and Wall Corrections for Supersonic Aircraft Configurations (opens in a new tab)

  6. RANS-CFD Based Assessment of Corrections Applied to the Measured Characteristics of Supersonic Configurations in a Low Speed Wind Tunnel

    The CFD software package Star-CCM+ was used to investigate the effects of the model support system and test section walls on a double-delta wing, representative of long-range supersonic configurations, in the University of Washington's Kirsten Wind Tunnel in an effort to improve current wind tunnel …

    washington Repository record for RANS-CFD Based Assessment of Corrections Applied to the Measured Characteristics of Supersonic Configurations in a Low Speed Wind Tunnel (opens in a new tab)

  7. Investigation into Integrated Free-Form and Precomputational Approaches for Aerostructural Optimization of Wind Turbine Blades

    … computational fluid dynamics method (RANS CFD), and using wind tunnel data. For each airfoil analysis method, there are two airfoil parameterization methods: the airfoil thickness-to-chord ratio and blended airfoil family factor. The second approach is called the free-form method …

    byu Repository record for Investigation into Integrated Free-Form and Precomputational Approaches for Aerostructural Optimization of Wind Turbine Blades (opens in a new tab) Download PDF for Investigation into Integrated Free-Form and Precomputational Approaches for Aerostructural Optimization of Wind Turbine Blades (opens in a new tab)

  8. Implementation, Validation, and Assessment of Lifting Line Method for Closely Coupled Wings

    … against Reynolds-averaged Navier-Stokes (RANS) CFD and experimental data across isolated wings, this study demonstrates that the mapping is conditional. The approximation holds for inboard sections of wings with low span loading but breaks down near wingtips and across low-aspect-ratio …

    calgary Repository record for Implementation, Validation, and Assessment of Lifting Line Method for Closely Coupled Wings (opens in a new tab)

  9. Interference Drag Due to Engine Nacelle Location for a Single-Aisle, Transonic Aircraft

    … The target aircraft was a single-aisle, transonic aircraft with a freestream Mach number of 0.8 at 35,000 feet and a design lift coefficient of 0.5. Using an MDO framework is necessary for placing the nacelle because of the competing objectives of the disciplines involved in aircraft …

    vt Repository record for Interference Drag Due to Engine Nacelle Location for a Single-Aisle, Transonic Aircraft (opens in a new tab)

  10. Design and Analysis of Low Reynolds Number Marine Propellers with Computational Fluid Dynamics (CFD) Transition Modeling

    … low Reynolds numbers, where laminar-turbulent transition of the boundary layer can impact the distributions of pressure and shear stress on the blade surface. Marine propellers operating at low Reynolds numbers are subject to laminar-turbulent transition of the boundary layer, which impacts the …

    vt Repository record for Design and Analysis of Low Reynolds Number Marine Propellers with Computational Fluid Dynamics (CFD) Transition Modeling (opens in a new tab)

  11. Application of 3D-CFD modelling for dynamic behaviour of ship in waves

    … computations using fully nonlinear unsteady RANS (Reynolds-averaged Navier-Stokes equations) codes. The ever increasing size of ships and offshore platforms has resulted in ‘softer’ hull which require hydroelastic effects to be taken into account when predicting fluid-structure interactions. …

    soton Download PDF for Application of 3D-CFD modelling for dynamic behaviour of ship in waves (opens in a new tab)

  12. Numerical Investigation of Scaling Effects of a Ramjet-Powered Projectile

    … performance is evaluated using high-fidelity RANS CFD models. Sensitivity to nonequilibrium laminar and turbulence-limited chemistry, and transitional turbulence treatments are evaluated. The physical sources of small scale performance limitations are identified for both fuel types. Finally, …

    embry-riddle Repository record for Numerical Investigation of Scaling Effects of a Ramjet-Powered Projectile (opens in a new tab)

  13. Internal cooling for HP turbine blades

    … <p>The effect of rotation on the heat transfer distribution in ribbed radial passages is investigated. An engine representative triple-pass serpentine passage, typical of a gas turbine mid-chord HP blade passage, is simulated using common industrial RANS CFD methodology with the results …

    oxford Repository record for Internal cooling for HP turbine blades (opens in a new tab)

  14. Analýza různých koncepcí výstupních difuzorů turbíny - simulace a experiment

    Předložená diplomová práce se zabývá návrhem CFD modelu turbínové části turbodmychadla s různými výstupními difuzory. Cílem práce je vytvořit CFD model, který je zkalibrován pomocí dostupných experimentálních měření na dynamometru z laboratoře Garrett Advancing Motion. K dispozici je 5 variant …

    brno-tech Repository record for Analýza různých koncepcí výstupních difuzorů turbíny - simulace a experiment (opens in a new tab)

  15. Drag and Mixing from Forced Mixing Nozzles on Turbofan Engines

    … of net thrust and added weight. An in-depth RANS-CFD parametric study of forced mixers on a full-scale target engine was warranted by gaps in the literature. First, a low-Mach experiment was designed to study the impact of fan generated swirl on mixing nozzle performance. Successful mixer …

    queens Repository record for Drag and Mixing from Forced Mixing Nozzles on Turbofan Engines (opens in a new tab)

  16. CFD analysis and design of a low-twist, hovering rotor equipped with trailing-edge flaps

    … simple blade element method with 3D inviscid and RANS CFD that allowed for a robust sequence of design specification, analysis, and verification. Most modern helicopters have high levels of blade twist and various tip shape designs to help improve hover performance. However, such blade designs …

    glasgow Download PDF for CFD analysis and design of a low-twist, hovering rotor equipped with trailing-edge flaps (opens in a new tab)

  17. Aerodynamic Modeling of a Flapping Membrane Wing Using Motion Tracking Experiments

    … model can be improved by comparison with a RANS CFD solver which provides insight into the fluid behavior. Implications on the membrane wing design are also presented.

    maryland Repository record for Aerodynamic Modeling of a Flapping Membrane Wing Using Motion Tracking Experiments (opens in a new tab)

  18. Experimental Measurements of Pressure, Temperature, and Density Using High-Resolution N(2) Coherent Anti-Stokes Raman Scattering

    … compared to similar quantities extracted from a RANS CFD simulation. The agreement between the mean CARS measurements and CFD predictions along the jet centerline and radial traverses is generally excellent. This CARS technique is able to capture the low-pressure and low-temperature conditions of …

    uiuc Repository record for Experimental Measurements of Pressure, Temperature, and Density Using High-Resolution N(2) Coherent Anti-Stokes Raman Scattering (opens in a new tab)

  19. Validation of a CFD Approach for Gas Turbine Internal Cooling Passage Heat Transfer Prediction

    … of a validated Computational Fluid Dynamics (CFD) modelling approach for internal cooling passages in rotating turbomachinery. A CFD Modelling approach and accompanying assumptions are tuned and validated against academically available experimental results for various serpentine passages. …

    calpoly Repository record for Validation of a CFD Approach for Gas Turbine Internal Cooling Passage Heat Transfer Prediction (opens in a new tab)

  20. Experimental and Numerical Investigations of the Aerodynamics of Flexible Inflatable Wings

    … Tech Stability Wind Tunnel, and numerical CFD computations of these wings. The experiment was conducted in the modular wall configuration of the anechoic test section at speeds ranging from 15 − 32.5 m/s for three different tether attachment configurations and wings constructed out of two …

    vt Repository record for Experimental and Numerical Investigations of the Aerodynamics of Flexible Inflatable Wings (opens in a new tab)

Page 1 of 3