Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 182 for “"RC beams"”.
-
Long-Term behavior of FRP-strengthened RC Beams
… deflection, crack width and residual strength of RC beams strengthened with glass FRP system. The effect of three major actions such as sustained loading, cyclic loading and tropical weathering were investigated. Deflections and crack widths of RC beams were found effectively controlled by the …
-
FLEXURAL STRENGTHENING OF RC BEAMS USING FERROCEMENT LAMINATES
… carried out to investigate the behaviour reinforced concrete beams strengthened in flexure using ferrocement laminates attached onto the soffits (tension face). Five aspects were studied; 1) the theoretical ultimate and serviceability characteristics of the strengthened beams, 2) the …
-
Ductility of RC beams with FRP reinforcing bars
Concrete structures with steel reinforcing bars are wlnerable to damage by corrosion most of all in coastal areas. A very common practice has been, for many years, to increase the amount of concrete covering, in order to protect the reinforcing bars against corrosion. Increasing the concrete …
-
Size Effect in Shear Critical FRP RC Beams
… its non-corrosive characteristics, Fibre-Reinforced Polymer (FRP) reinforcement can be a promising alternative to conventional steel reinforcement in structural elements exposed to severe environments, such as in bridge girders. However, the use of FRPs in such elements is limited, as their …
-
Fatigue behaviour of CFRP-repaired corroded RC beams
… of the structure. With the use of fibre reinforced plastics (FRPs) to rehabilitate and extend the life of structures, the remaining fatigue life after the repair must be assessed. This research is focused on the use of CFRP for the repair of corroded reinforced concrete beams. A series of …
-
Strengthening of RC Beams and Frames by External Prestressing
… post-tensioning in strengthening continuous beams in reinforced concrete frames was investigated. First, a direct method to determine the required external tendons and to evaluate the load-carrying capacity of strengthened beams was proposed. The method was verified with test results of 124 …
-
Failure Mode Identifications Of Rc Beams Externally Strengthened With
The application of carbon reinforced-fiber polymers (CFRP) to structures is a new development that is still under intense research. However, the rehabilitation or retrofit of damage reinforced concrete members by the external bonding of CFRP is becoming increasingly popular in the construction …
-
FRP strengthening of RC beams with corroded steel reinforcement
… on the strengthening of the corroded reinforced concrete structure by studying the background of corrosion from its grassroots level. As we know, the corrosion of steel reinforcement is one of the most common problems existing in RC structures during the service life. Fiber-reinforced …
-
Shear Behaviour of Slender RC Beams with Corroded Web Reinforcement
This research study examined the effect of corrosion of web reinforcement (stirrups) on the shear behaviour of slender reinforced concrete (RC) beams. The experimental program consisted of seventeen slender shear-critical RC beams: five uncorroded and twelve corroded beams. The test variables …
-
Static and creep response of RC beams strengthened with CFRP
… AUTHOR'S REQUEST.] The use of carbon fiber reinforced polymers (CFRP) for strengthening and retrofit of existing reinforced concrete members has been proven to be effective in improving their structural performance. Although existing research studied the behavior of concrete structural element …
-
Torsional behavior of RC beams strengthened with PBO-FRCM composite
"Externally bonded fiber reinforced cementitious matrix (FRCM) composites have been investigated recently as an alternative to fiber reinforced polymer (FRP) composites to overcome certain shortcomings such as the inability to install on wet surfaces or in low temperatures, low fire resistance, low …
-
Interfacial stress analysis and strengh prediction of plated rc beams
Strengthening of reinforced concrete (RC) beams by external plate bonding (EPB) technique has become very popular for the last two decades, especially in the past few years with the increasing applications of the advanced composites. Unlike the unstrengthenedb eams, the composite structure shows an …
-
CFRP strengthening of RC beams with corroded lap spliced steel bars
… in the form of externally bonded fiber reinforcing polymer (FRP) sheets have been successfully used for rehabilitation and strengthening of infrastructure in lieu of traditional repair techniques such as steel plates bonding. FRPs are used because of their light weight, ease of application, …
-
Behaviour of Shear Critical RC Beams with Corroded Longitudinal Steel Reinforcement
… on the behaviour of shear critical reinforced concrete (RC) beams. The results of twenty RC beams (ten deep beams and ten slender beams) are described and discussed. The test variables included: corrosion level (2.5%, 5% and 7.5%) and existence of stirrups (beams without stirrups and beams …
-
Simplified analysis to predict the behavior of RC beams under collapse
The behavior of beams under progressive collapse plays an important role in resisting the collapse. This research addresses the complicated behavior of beams under collapse. The goal of this research is to provide an easy-to-use computational program using Matlab, the technical computing software, …
-
Shear strengthening of RC beams using carbon fiber reinforced polymer laminates
… rather than in shear. Many existing reinforced concrete (RC) members are found to be deficient in shear strength and need to be repaired. Deficiencies occur due to several reasons such as insufficient shear reinforcement or reduction in steel area due to corrosion, increased service load, …
-
Long-Term Flexural Performance of Prestressed-NSM-CFRP Strengthened RC Beams
The use of prestressed Fibre Reinforced Polymer (FRP) for strengthening structural members requires gaining further knowledge about the long-term behaviour of these members. In this research, the long-term flexural performance of the prestressed Near-Surface Mounted (NSM) Carbon Fibre Reinforced …
-
FE Analyses of Corrosion-Damaged RC Beams Strengthened with FRP Components
… by deterioration due to corrosion of reinforcement. Therefore, the need for strengthening corrosion-damaged structures has increased in the last decades. Strengthening using Fibre Reinforced Polymers (FRP) is one among many methods that can restore the strength and extend the service life of …
-
STRENGTHENING OF RC BEAMS WITH EXTERNALLY BONDED AND ANCHORED FRP LAMINATE
… bonded FRP laminate from retrofitted reinforced concrete (RC) members can lead to inefficient use of FRP and can limit the level of strength increase that can be achieved. In this investigation, novel carbon FRP anchors were used in an attempt to delay the onset of premature debonding and to …
Page 1 of 10