Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"REFLOOD"”.

  1. Rewetting Temperature During Top and Bottom Reflood

    Made available in DSpace on 2017-07-06T18:56:22Z (GMT). No. of bitstreams: 2 Siegel_Alan_D_MS.pdf: 51485799 bytes, checksum: f0352a352d8b1c48211ca671f4c53089 (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1979

    uiuc Repository record for Rewetting Temperature During Top and Bottom Reflood (opens in a new tab)

  2. The response of vegetation to seasonality of drawdown and reflood depth

    … the previous year were flooded to one of four reflood depths (+15cm dry, -15cm flood, -30cm flood, and -50cm flood). Samples remained flooded until 15 August 1989. The earlier water was removed the previous year (1988), the more water could be applied to the area the following year (1989). …

    ttu Repository record for The response of vegetation to seasonality of drawdown and reflood depth (opens in a new tab)

  3. An Analysis of Quench Front Propagation During Bottom Reflood of a heated Annular Channel

    Made available in DSpace on 2017-07-06T18:49:01Z (GMT). No. of bitstreams: 3 Kimball_Kevin_D_MS.pdf: 72010837 bytes, checksum: b7112f4e2ed4b67c6244fc6a2a074f9f (MD5) Kimball_Kevin_D_MS_ABS.pdf: 820094 bytes, checksum: e1c23063ac37846e1ce48a616c0f2a6e (MD5) license.txt: 4813 bytes, checksum: …

    uiuc Repository record for An Analysis of Quench Front Propagation During Bottom Reflood of a heated Annular Channel (opens in a new tab)

  4. Development and experimental evaluation of an analytical model of the electronic signal processor for the impedance probe used in the Advance Instrumentation for Reflood Studies (AIRS) program

    … used in the Advance Instrumentation for Reflood Studies Program. The electronic circuit is based on a concept of Dr. M. J. Roberts at the Oak Ridge National Laboratory.</p><p>The purpose of the signal processor is to measure the impedance and changes in impedance of a two-phase flow …

    ut-knoxville Repository record for Development and experimental evaluation of an analytical model of the electronic signal processor for the impedance probe used in the Advance Instrumentation for Reflood Studies (AIRS) program (opens in a new tab)

  5. On the development of a TRACE model for the study of reflooding in BWR parallel channels

    … of the radioactive fission products. In order to reflood the core and stop the increase of temperature, an emergency core cooling system delivers water under this kind of conditions. The current work is an investigation of how the power distribution between two channels can affect the process of …

    chalmers Repository record for On the development of a TRACE model for the study of reflooding in BWR parallel channels (opens in a new tab)

  6. Effects of water level management on water chemistry and primary production of boreal marshes in northern Manitoba, Canada

    … level manipulation studies have found that a reflood after a period of total drawdown caused a pulse of nutrients leaching from decomposing litter. This work suggests that these changes may not require complete drying out of sediments, or the input of large amounts of litter from drowned …

    manitoba Repository record for Effects of water level management on water chemistry and primary production of boreal marshes in northern Manitoba, Canada (opens in a new tab)

  7. Analysis of reverse flow restriction device to prevent fuel dryout during loss of coolant and instability accidents of boiling water reactors

    … at lower levels. Moreover, the RFRD achieved the reflood phase (when the saturation temperature of the clad is restored) earlier than without the RFRD. Sensitivity results demonstrated that for LOCA, high reverse flow friction coefficient is needed and hence the RFRD should be well-fitted to the …

    uiuc Repository record for Analysis of reverse flow restriction device to prevent fuel dryout during loss of coolant and instability accidents of boiling water reactors (opens in a new tab)

  8. TRACE code validation of boiling water reactor spray cooling injection into a SVEA fuel assembly

    … of peak cladding temperature in a BWR LOCA reflood scenario with spray cooling present.

    uiuc Repository record for TRACE code validation of boiling water reactor spray cooling injection into a SVEA fuel assembly (opens in a new tab)

  9. Molecular dynamic simulation of pool boiling process

    … pressure 2.7 bar, which is typical pressure of reflood and passive cooling systems. The bulk of the water was kept at saturation temperature for the entirety of simulation. Temperature of the heated surface was set to achieve desired temperature difference between saturated fluid and wall equal …

    uiuc Repository record for Molecular dynamic simulation of pool boiling process (opens in a new tab)

  10. Monitoring The Progress Of Damage In A SICf-SICm Composite Nuclear Fuel Cladding Under Internal Pressure Using Acoustic Emission

    … a thermal shock, meant to represent a reactor reflood, were simulated. The PCMI was simulated by loading the Sif-SiCm composite tubing, at temperature of 1373 oK (1100 oC), using a solid surrogate and a heating technique that induces temperature gradients through the wall of the Sif-SiCm …

    south-carolina Repository record for Monitoring The Progress Of Damage In A SICf-SICm Composite Nuclear Fuel Cladding Under Internal Pressure Using Acoustic Emission (opens in a new tab)

  11. Development of generalized correlations for two-phase flow velocity measurements obtained from impedance probes in rod bundle

    … from the AIRS (Advanced Instrumentation for Reflood Studies) at the Oak Ridge National Laboratory, for both air-water and steam-water systems. The prediction was consistently within ±25% for the liquid phase velocity and ±30% for the vapor phase velocity. Results of an uncertainty analysis …

    utk-theses Repository record for Development of generalized correlations for two-phase flow velocity measurements obtained from impedance probes in rod bundle (opens in a new tab)