Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"REINFORCING STEELS"”.
-
Chloride Penetration Resistance and link to Service Life Design of Virginia Bridge Decks
… ingress in RC initiates corrosion of the reinforcing steel. The high costs of corrosion have sparked interest in service life design of bridge decks. This thesis characterized the exposure conditions of Virginia, including temperature and surface chloride concentration, as well as Virginia …
-
Comparative study of the corrosion behaviour of conventional carbon steel and corrosion resistant reinforcing bars
… Bridges, Marine structures, etc.). Corrosion of reinforcing steel leads to cracking and spalling of the concrete cover and billions of dollars are spent every year on repairing such damaged structures. New types of reinforcements have been developed in order to avoid these high cost repairs. Thus …
-
Microstructural refinements of concrete due to fiber reinforcement and its influence on corrosion initiation of reinforcing steel
… of marine environment. Corrosion activity in reinforcing steels was monitored for 56 weeks using three electrochemical methods: half-cell potential, galvanic current and linear polarization resistance. Results demonstrated that fibers did bring about a refinement in the pore structure by …
-
High Strength Steel Reinforcement in Concrete Columns
… Structures AS 3600 incorporated 500 MPa grade reinforcing steels, which represented a 20 percent increase in strength over the 400 MPa grade steel of the previous version. The latest version of AS 3600 - 2018 allows for high strength steel up to 600 MPa for longitudinal reinforcement and 800 …
-
Service life of hot-dip galvanised reinforcement bars in carbonated and chloride-contaminated concrete
… layer and the ferrite. The effects of different reinforcing steels on the service life of outdoor concrete structures were estimated through calculations. A stochastic method based on the probability of damage, Monte Carlo simulation, and reliability and sensitivity analyses were also used. In …
-
ANCHORAGE OF HIGH-STRENGTH REINFORCING BARS WITH STANDARD HOOKS
Hooked bars are often used to anchor reinforcing steel where concrete dimensions are not sufficient to provide the required development length for straight reinforcement, such as in external beam-column joints. The purpose of this study is to expand the understanding of the behavior of hooked bars …
-
Corrosion of Alternative Grades of Reinforcing Steel in Concrete
Reinforcing steel in concrete has been used for many years in roads, bridges and other structures to give strength and durability; concrete has only good compressive strength and reinforcing steel gives the tensile strength to the concrete to sustain both the compressive and tensile load, making …
-
BOND BEHAVIOR OF EPOXY-COATED REINFORCING BARS IN NON-PROPRIETARY UHPC
… and ASTM A1124 textured-epoxy-coated reinforcing bars. The UHPC mixture with the best properties was used to cast a closure strip between two precast sections to determine the splice strength of No. 4, No. 5, and No. 8 uncoated, epoxy-coated, and textured-epoxy-coated reinforcing bars …
-
Αντισεισμική συμπεριφορά υποστυλωμάτων και δοκών με μικρό άνοιγμα διάτμησης και συγκριτική πειραματική έρευνα για διάφορους τύπους όπλι...
THIS IS AN EXPERIMENTAL INVESTIGATION OF THE SEISMIC RESISTANCE OF LOW ASPECT RATIO SHORT COLUMNS AND BEAMS REINFORCED WITH A) CONVENTIONAL PARALLEL BARS, B) INCLINED BARS ARRANGED SO AS TO FORM A RHOMBIC TRUSS AND C) A COMBINATION OF PARALLEL AND DIAGONAL BARS, UNDER SEISMIC RESISTANCE OF …