Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 80 for “"RF Front-ends"”.

  1. SiGe BiCMOS RF front-ends for adaptive wideband receivers

    … circuits that can deliver consistent performance even under the threat of increasing process variation. These circuits can be used to build ``self-healing" systems, which can detect process imperfections and compensate accordingly to optimize performance. In addition to improving yield, …

    gatech Repository record for SiGe BiCMOS RF front-ends for adaptive wideband receivers (opens in a new tab)

  2. SiGe HBT BiCMOS RF front-ends for radar systems

    … power, compact, lightweight, low cost, high performance, and high reliability. All these requirements have provided a very strong motivation for developing fully monolithic T/R modules. SiGe HBT BiCMOS technology is an excellent candidate to integrate all the RF circuit blocks on the T/R module …

    gatech Repository record for SiGe HBT BiCMOS RF front-ends for radar systems (opens in a new tab)

  3. Liquid-Metal-Based Reconfigurable Components for RF Front Ends

    … reconfigurable components for radio-frequency (RF) front ends. Recon gurable components allow the RF front end to dynamically change key radio parameters such as output power, signal carrier frequency, and bandwidth. These capabilities enable the radio transceiver to adapt to environmental and …

    hawaii Repository record for Liquid-Metal-Based Reconfigurable Components for RF Front Ends (opens in a new tab)

  4. Investigation of RF Front-Ends For Simultaneous Multinuclear MR Imaging and Spectroscopy

    … In this dissertation, a reconfigurable triplexer front-end is proposed which can provide separate filtering at different nuclei and gain controls on each signal path temporarily to improve SNR performance in a single channel digitization. Simultaneous MR images (1H/23Na/2H) were acquired by …

    tamu Repository record for Investigation of RF Front-Ends For Simultaneous Multinuclear MR Imaging and Spectroscopy (opens in a new tab)

  5. Using complementary silicon-germanium transistors for design of high-performance rf front-ends

    … the achievable dynamic range limits in high-performance RF front-ends designed using SiGe HBTs, with a focus on complementary (npn + pnp) SiGe technologies. The performance requirements of RF front-ends are high gain, high linearity, low dc power consumption, very low noise figure, and …

    gatech Repository record for Using complementary silicon-germanium transistors for design of high-performance rf front-ends (opens in a new tab)

  6. RF MEMS Switches with Novel Materials and Micromachining Techniques for SOC/SOP RF Front Ends

    This dissertation deals with the development of RF MEMS switches with novel materials and micromachining techniques for the RF and microwave applications. To enable the integration of RF and microwave components on CMOS grade silicon, finite ground coplanar waveguide transmission line on CMOS grade …

    gatech Repository record for RF MEMS Switches with Novel Materials and Micromachining Techniques for SOC/SOP RF Front Ends (opens in a new tab)

  7. Design, analysis, and optimization of radio frequency front-ends for integrated wireless receivers

    … on the design, analysis, and optimization of RF front-ends for wireless zero- and low-IF receivers. The main interest of the work is in the 1-4 GHz range and in CMOS and BiCMOS technologies. Often, the RF front-end limits the performance of the entire direct conversion or low-IF radio …

    aalto Repository record for Design, analysis, and optimization of radio frequency front-ends for integrated wireless receivers (opens in a new tab)

  8. Receiver design for multi-carrier transmission systems in the presence of imperfections

    … mobile terminals require high quality performance from RF front-end devices. Heterodyne receivers have been a widely preferred choice for RF frontends. Although these receivers have no performance issues however they are not monolithically integratable and therefore cannot be …

    whiterose Download PDF for Receiver design for multi-carrier transmission systems in the presence of imperfections (opens in a new tab)

  9. Direct sampling receivers for broadband communications

    Today everything tends to be connected in the Internet of Things (IoT) universe, where a broad variety of communication standards and technologies are used for those connected devices. It is always a dream to design a Software-Defined Radio (SDR) supporting different standards solely based on the …

    texas Repository record for Direct sampling receivers for broadband communications (opens in a new tab)

  10. Integrated Radio-Frequency Receivers for RF-to-Digital Converters

    … An attractive approach to realize an SDR is an RF-to-digital converter. In best case, an RF-to-digital converter consists of an analog-to-digital converter (ADC) which is directly connected to a wideband antenna. This means that the received signal on the antenna is immediately converted in the …

    aalto Repository record for Integrated Radio-Frequency Receivers for RF-to-Digital Converters (opens in a new tab)

  11. Low Noise Front End Signal Transport Design for L-band Phased Array Receivers

    RF receiver improvements in size, weight, power, and sensitivity are constant goals in the wireless communications community. The combination of phased array antenna systems with high speed analog to digital converters helps engineers meet these goals, because many of the analog components and …

    byu Repository record for Low Noise Front End Signal Transport Design for L-band Phased Array Receivers (opens in a new tab) Download PDF for Low Noise Front End Signal Transport Design for L-band Phased Array Receivers (opens in a new tab)

  12. Co-design of Reconfigurable and Multifunction Passive RF/Microwave Components

    … and realized. Multifunction and multi-band RF front-end components are promising solutions for reducing the size and enhancing the performance of multi-band communication systems. This dissertation focuses on the design and implementation of different multifunction and tunable microwave …

    purdue-thes Repository record for Co-design of Reconfigurable and Multifunction Passive RF/Microwave Components (opens in a new tab)

  13. Thin-Film Lithium Niobate Technology

    … to achieve novel devices or improve the performance of existing device technologies. First, I focused on components for multi-frequency RF front-end applications. Specifically, I demonstrated LiNbO3 thin-film contour mode resonators (CMRs) for multi-frequency wide bandwidth RF filters. The …

    cornell Repository record for Thin-Film Lithium Niobate Technology (opens in a new tab)

  14. Ultra-miniaturized and high-Q embedded loaded coaxial cavity resonators and filters

    … Microwave filters are critical components in the RF front-ends for band selection and unwanted signal rejection. These filters generally occupy a large area in the RF front-ends. In addition, RF filters’ in-band losses significantly impact the overall system performance, such as noise figure and …

    oklahoma-thes Repository record for Ultra-miniaturized and high-Q embedded loaded coaxial cavity resonators and filters (opens in a new tab)

  15. Integrated Tunable LC Higher-Order Microwave Filters for Interference Mitigation

    … and radar systems require highly reconfigurable RF front-ends to realize the vision of Software-Defined Radio (SDR), where a single digitally-enabled radio is able to cover multiple bands and multiple operating standards. However, in the increasingly hostile RF environment, filtering becomes a …

    vt Repository record for Integrated Tunable LC Higher-Order Microwave Filters for Interference Mitigation (opens in a new tab)

  16. Design of a mm-wave Planar CPW-fed Tapered Dielectric Rod Antenna

    … are very low loss and many designs for front-end components are developed on these substrates due to their high permittivity. In other words, the proposed antenna can be integrated with the front-end platform in the same substrate. In addition, the antenna feeding is the CPW line which …

    waterloo Repository record for Design of a mm-wave Planar CPW-fed Tapered Dielectric Rod Antenna (opens in a new tab)

  17. Self-healing RF SoCs: low cost built-in test and control driven simultaneous tuning of multiple performance metrics

    … to a proliferation of highly complex integrated RF system-on-chip (SoC) and system-on-insulator (SoI) solutions. The use of scaled CMOS technologies for high frequency wireless applications is posing daunting technological challenges both in design and manufacturing test. To ensure market …

    gatech Repository record for Self-healing RF SoCs: low cost built-in test and control driven simultaneous tuning of multiple performance metrics (opens in a new tab)

  18. Millimeter-Wave Software-Defined Radios with Programmable Directionality

    … commercially available mmWave radio frequency (RF) front-ends with off-the shelf SDRs have made it possible to set up experimental test-bed platforms for beam alignment studies. In this thesis, we present a low-cost “directional SDR” test-bed that enables convenient programming of mmWave beam …

    ucf Repository record for Millimeter-Wave Software-Defined Radios with Programmable Directionality (opens in a new tab)

  19. Design and Analysis of Supply-Scaled Distributed Power Amplifiers

    … are developed for use in radio frequency (RF) front-ends. For viable integration in software-defined radios (SDR), the RF front-end must support operation over a wide range of tunable frequencies and duplex modulation schemes. This remains an unsolved challenge for circuit designers, and is …

    cornell Repository record for Design and Analysis of Supply-Scaled Distributed Power Amplifiers (opens in a new tab)

Page 1 of 4