Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 101 for “"RF Microwave"”.

  1. RF/microwave absorbing nanoparticles and hyperthermia

    … to transform electromagnetic energy at microwave frequencies into therapeutic heating. Targeted nanoparticles, in conjunction with microwave irradiation, can increase the temperatures of the targeted area over the peripheral region. Therefore, to become clinically viable, microwave …

    texas Repository record for RF/microwave absorbing nanoparticles and hyperthermia (opens in a new tab)

  2. Soft Magnetic Composite Substrates for RF/Microwave Applications

    … magnetic and dielectric losses were prepared for RF and microwave device applications. Frequency dispersion of RF complex permeability of Ni-Cu-Zn ferrites prepared under different applied hydraulic pressures and durations have been thoroughly investigated. The Ni0.35Cu0.19Zn0.46Fe2O4 ferrites …

    usf Repository record for Soft Magnetic Composite Substrates for RF/Microwave Applications (opens in a new tab)

  3. Three-Dimensional Heterogeneous Integration for RF/Microwave Applications

    High performance RF/mixed signal systems require new interconnect strategies to combine high frequency (microwave/mm-wave) circuitry with silicon mixed-signal and baseband digital processing. In such systems, heterogeneous vertical integration, in which circuits in different technologies can be …

    vt Repository record for Three-Dimensional Heterogeneous Integration for RF/Microwave Applications (opens in a new tab)

  4. Mechanically Tunable RF/Microwave Filters: from a MEMS Perspective

    RF/microwave tunable filters are widely employed in radar systems, measurement instruments, and communication systems. By using tunable filters, the frequency bandwidth is utilized effectively and the system cost and complexity is reduced. In the literature, various tuning techniques have been …

    waterloo Repository record for Mechanically Tunable RF/Microwave Filters: from a MEMS Perspective (opens in a new tab)

  5. A Study of Direct Digital Manufactured RF/Microwave Packaging

    … facets of direct digital manufactured (DDM) microwave packages are studied. The rippled surface inherent in fused deposition modeling (FDM) fabricated geometries is modeled in Ansoft HFSS, and its effect on the performance of microstrip transmission lines is assessed via simulation and …

    usf Repository record for A Study of Direct Digital Manufactured RF/Microwave Packaging (opens in a new tab)

  6. Noise Modeling and Characterization of Nonlinear RF/Microwave Components

    … behavioral model for time-invariant nonlinear microwave circuits is presented. The formalism uses noise waves and large-signal scattering functions known as X-parameters to extract a multi-port network's noise correlation matrix. Further processing yields figures-of-merit including effective …

    whiterose Download PDF for Noise Modeling and Characterization of Nonlinear RF/Microwave Components (opens in a new tab)

  7. Performance Enhancement of RF/Microwave Devices Using Filter Synthesis Techniques

    … can be used to design and enhance the performance of several discrete components of the RF front-end. Throughout this work, a block diagram of a typical receiver is used to illustrate each component separately. Four main areas are covered: (1) filter/antenna integration, (2) …

    ucf Repository record for Performance Enhancement of RF/Microwave Devices Using Filter Synthesis Techniques (opens in a new tab)

  8. Co-design of Reconfigurable and Multifunction Passive RF/Microwave Components

    … and realized. Multifunction and multi-band RF front-end components are promising solutions for reducing the size and enhancing the performance of multi-band communication systems. This dissertation focuses on the design and implementation of different multifunction and tunable microwave …

    purdue-thes Repository record for Co-design of Reconfigurable and Multifunction Passive RF/Microwave Components (opens in a new tab)

  9. Embedded vector measurement of RF/microwave circuits in LTCC technology

    … systems and standards continues to increase, RF hardware re-use is becoming more and more important to reduce cost and size and eliminate unnecessary component redundancy. One way of maximizing RF hardware re-use is to deploy reconfigurable circuits. This is turn relies on embedded vector …

    ets-quebec Download PDF for Embedded vector measurement of RF/microwave circuits in LTCC technology (opens in a new tab)

  10. Multiband RF/Microwave Front-end Receiver Design for Multi-Standard Applications

    … for high integration design. Compared to the RF transmitter, the design of the RF receiver front end is considered to be more challenging due to the increased signal interference/noise in the communication path, which often can be neglected in transmitter design due to the large discrepancy …

    regina Repository record for Multiband RF/Microwave Front-end Receiver Design for Multi-Standard Applications (opens in a new tab) Download PDF for Multiband RF/Microwave Front-end Receiver Design for Multi-Standard Applications (opens in a new tab)

  11. A Continuous and Static Water Contaminant Detection System Using RF Microwave Principles

    A continuous, static, and non-interfering water contaminant detection method is presented to measure specific water contaminants (NaCl, MgCl2, and mixture of NaCl and MgCl2) using RF microwave principles. A coil is mounted on the surface of a glass tube and the liquid sample is placed inside of the …

    marquette Repository record for A Continuous and Static Water Contaminant Detection System Using RF Microwave Principles (opens in a new tab)

  12. A Study of RF/Microwave Components Using Fused Deposition Modeling and Micro-Dispensing

    The design and study of multiple RF direct digital manufactured (DDM) devices are presented in this work. A 2.45 GHz, 180°; hybrid coupler is designed to provide the space required for other system components. The coupler is designed and manufactured on a 32 mil Rogers 4003C substrate and adapted …

    usf Repository record for A Study of RF/Microwave Components Using Fused Deposition Modeling and Micro-Dispensing (opens in a new tab)

  13. Passive and active circuits in cmos technology for rf, microwave and millimeter wave applications

    … One such alternative, an amalgamation of microwave and analog design techniques, is pursued in this work. A number of passive and active circuits have been designed using a combination of microwave and analog design techniques. For passives, the most crucial challenge to their CMOS …

    tamu Repository record for Passive and active circuits in cmos technology for rf, microwave and millimeter wave applications (opens in a new tab)

  14. Novel RF/Microwave Circuits And Systems for Lab on-Chip/on-Board Chemical Sensors

    Recent research focuses on expanding the use of RF/Microwave circuits and systems to include multi-disciplinary applications. One example is the detection of the dielectric properties of chemicals and bio-chemicals at microwave frequencies, which is useful for pharmaceutical applications, food and …

    tamu Repository record for Novel RF/Microwave Circuits And Systems for Lab on-Chip/on-Board Chemical Sensors (opens in a new tab)

  15. Novel Approaches in Non-Destructive UWB RF/ Microwave CMOS Integrated Time Domain Spectroscopy Systems and Circuits

    … researchers have focused on expanding the use of RF/Microwave circuits and systems for multi-disciplinary applications. This dissertation aims to find new ways to integrate microwave broadband (MB) sensors and systems on CMOS integrated circuits (ICs) since system on chip (SoC) has great potential …

    tamu Repository record for Novel Approaches in Non-Destructive UWB RF/ Microwave CMOS Integrated Time Domain Spectroscopy Systems and Circuits (opens in a new tab)

  16. Tunable Microwave Bandpass Filter Design Using The Sequential Method

    Microwave filers are the essential components in a RF (radio frequency)/Microwave system, because they are used to provide frequency selectivity. A RF/Microwave system always supports multiple radio frequency bands. Thus, several microwave filters are normally needed in a RF/Microwave system. The …

    regina Repository record for Tunable Microwave Bandpass Filter Design Using The Sequential Method (opens in a new tab) Download PDF for Tunable Microwave Bandpass Filter Design Using The Sequential Method (opens in a new tab)

Page 1 of 6