Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 216 for “"RF front-end"”.

  1. Cognitive RF Front-end Control

    This research addresses the performance degradation in receivers due to poor selectivity. Poor selectivity is expected to be a primary limitation on the performance of Dynamic-Spectrum-Access (DSA) and millimeter wave (mmWave) technologies. Both DSA and mmWave are highly desired technologies …

    vt Repository record for Cognitive RF Front-end Control (opens in a new tab)

  2. RF FRONT-END OPTIMIZATION FOR HARMONIC RADAR ARCHITECTURES

    … in the early development of radio frequency (RF) technologies. Initially conceived in the mid-20th century, the idea of using harmonic frequencies for remote sensing by radar detection arose when researchers sought to overcome the limitations inherent in fundamental frequency radar systems. …

    ttu Repository record for RF FRONT-END OPTIMIZATION FOR HARMONIC RADAR ARCHITECTURES (opens in a new tab) Embargoed until 2027-12-01

  3. Fault-tolerant design of RF front-end circuits

    The continuing trends of scaling in the CMOS industry have, inevitably, been accompanied by an ever-increasing array of process faults and fabrication complexities. The relentless march towards miniaturization and massive integration, in addition to increasing operating frequencies has resulted in …

    rit Repository record for Fault-tolerant design of RF front-end circuits (opens in a new tab)

  4. CMOS RF front-end receivers for DVB-SH

    … for implementing power and area efficient RF receivers for Digital TV based on DV B - SH specifi- cations. The results of the present work are integrated in an ambitious research project: RECITAL +, DV B - SH Digital TV Receiver, Spanish Ministry of Science and Innovation …

    ulpgc Repository record for CMOS RF front-end receivers for DVB-SH (opens in a new tab)

  5. Multi-standard RF front-end for avionic systems

    … of a given antenna on an aircraft’s overall performance. These factors are directly related to aircraft fuel consumption, speed and range. This project’s focus is on RF front-end electronics. The main goal here is to bring aircraft radio equipment as close as possible to the antennas in order …

    ets-quebec Download PDF for Multi-standard RF front-end for avionic systems (opens in a new tab)

  6. Smart Antenna RF Front-end for WLAN and SDARS

    This thesis presents RF front-end system design for both WLAN (Wireless Local Area Network) and SDARS (Satellite Digital Audio Radio System) applications using adaptive smart antenna technique. It is important to understand that smart antenna system with adaptive beam-forming provides the following …

    waterloo Repository record for Smart Antenna RF Front-end for WLAN and SDARS (opens in a new tab)

  7. Built-in-self-test of RF front-end circuitry

    … products and the advent of deep submicron CMOS, RF ICs have become fairly commonplace in the semiconductor market. This has given rise to a new breed of Systems-On-Chip (SOCs) with RF front-ends tightly integrated along with digital, analog and mixed signal circuitry. However, the reliability of …

    rit Repository record for Built-in-self-test of RF front-end circuitry (opens in a new tab)

  8. Reconfigurable RF Front End Components for Multi-Radio Platform Applications

    … create challenges for the antenna and RF front-end designs with multi-band and wide-band techniques. These challenges include: multiple filters, which are lossy, bulky, and expensive, are needed in the system; device board size limitation and the associated isolation problems caused by …

    utk-theses Repository record for Reconfigurable RF Front End Components for Multi-Radio Platform Applications (opens in a new tab)

  9. Wideband RF Front End Daughterboard Based on the Motorola RFIC

    … We still need to convert high-radio frequency (RF) signals that we receive to low intermediate-frequency (IF) or baseband (centered on zero Hz) signals in order for ADCs to sample them and feed them into microchips for processing. The reverse is true when we transmit. Amplification is also …

    vt Repository record for Wideband RF Front End Daughterboard Based on the Motorola RFIC (opens in a new tab)

  10. Design of a Miniaturized SoP Integrated GNSS RF Front-End Module

    … integrated within an efficient Radio Frequency (RF) front-end module (FEM). A System-on-Package (SoP) integration technique is adopted for the design of all the components in this thesis. Two novel miniaturized filters are designed, where one of them is a wideband filter targeting the complete …

    queens Repository record for Design of a Miniaturized SoP Integrated GNSS RF Front-End Module (opens in a new tab)

  11. DESIGNING AND CONFIGURING PROOF-OF-CONCEPT LPI RADAR RF FRONT END

    Multi-function systems that perform radar detection, conduct electronic warfare, and enable communications between platforms and troops are highly desirable; however, integrating these functions into a single package of limited physical size presents significant challenges. The design, assembly, …

    nps Repository record for DESIGNING AND CONFIGURING PROOF-OF-CONCEPT LPI RADAR RF FRONT END (opens in a new tab)

  12. Low-Power RF Front-End Design for Wireless Body Area Networks

    Wireless body area networks (WBANs) have tremendous potential to benefit from wireless communication technology and are expected to make sweeping changes in the future human health care and medical fields. While the prospects for WBAN products are high, meeting required device performance with a …

    vt Repository record for Low-Power RF Front-End Design for Wireless Body Area Networks (opens in a new tab)

  13. Reconfigurable RF front end: A mixer-first architecture and tunable filters

    Two ways of achieving a reconfigurable RF receiver system, namely a mixer-first receiver system and an on-chip tunable bandpass filter, are reviewed and verified. For the mixer-first receiver, a pure passive mixer called distributedly modulated capacitor (DMC) is introduced and analyzed, then …

    uiuc Repository record for Reconfigurable RF front end: A mixer-first architecture and tunable filters (opens in a new tab)

  14. Power-Efficient Voltage-Mode RF Front-End Using Quantized Analog Signal Processing

    … real-estate and reducing overall cost for modern RF front-ends, SAW (Surface Acoustic Wave)-less RF receivers have become a popular topic recently. Unfortunately, removal of SAW filters requires the receiver to handle large blockers (e.g., above 0 dBm) without degrading the noise floor and in turn …

    toronto-retro Repository record for Power-Efficient Voltage-Mode RF Front-End Using Quantized Analog Signal Processing (opens in a new tab)

  15. CMOS RF front-end design for terrestrial and mobile digital television systems

    … system; it down-converts the desired DTV RF channel to baseband or a low intermediate frequency with enough quality. This research is mainly focused on the analysis and realization of low-cost low-power front-ends for ATSC terrestrial DTV and DVB-H mobile DTV tuner systems. For the design …

    tamu Repository record for CMOS RF front-end design for terrestrial and mobile digital television systems (opens in a new tab)

  16. RF Front-End Design for X Band using 0.15µm GaN HEMT Technology

    … and future wireless communication. An X-band RF front-end circuit for next generation wireless network applications is presented in this work. It details the design of a low noise amplifier and a power amplifier for X band operation. The designed amplifiers were integrated with a wideband …

    ottawa-retro Repository record for RF Front-End Design for X Band using 0.15µm GaN HEMT Technology (opens in a new tab)

  17. Design of wideband silicon-germanium RF front end circuits for broadband communications systems

    This thesis discusses the design of wideband front-end circuits for broadband communications systems, designed in silicon-germanium technology. The bandwidths of these circuits cover from 2 GHz to 18 GHz. In Chapter 1, an introduction to wideband communications systems is presented. In addition, a …

    gatech Repository record for Design of wideband silicon-germanium RF front end circuits for broadband communications systems (opens in a new tab)

Page 1 of 11