Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 70 for “"RF power amplifier"”.

  1. Class E switching model RF power amplifier

    The class E switching mode rf power amplifier has many advantages over previously developed power amplifiers. This thesis discusses the principles of operation, description, development, and performance of the amplifier along with laboratory test results.

    nps Repository record for Class E switching model RF power amplifier (opens in a new tab)

  2. Negative Conductance Load Modulation RF Power Amplifier

    … schemes have caused very poor efficiencies in power amplifiers for wireless transmission systems due to high peak-to-average power ratios (PAPR). This thesis first presents the issue with classical power amplifiers in modern modulation systems. A brief overview of current attempts to mitigate …

    calpoly Repository record for Negative Conductance Load Modulation RF Power Amplifier (opens in a new tab)

  3. LINEARIZATION OF RF POWER AMPLIFIER USING PREDISTORTION TECHNIQUES

    … is concerned with the study of linearizing RF power amplifiers using predistortion techniques. The study proposes two novel techniques employing samples o[ multiple channels (SMC) method and cross-correlation method for both single and multiple carries source. In SMC scheme, multi-carrier …

    nus Download file for LINEARIZATION OF RF POWER AMPLIFIER USING PREDISTORTION TECHNIQUES (opens in a new tab)

  4. Digitally-assisted, efficiency enhanced, linear RF power amplifier architectures

    … development of efficiency enhanced, linearized power amplifier (PA) architectures. In this research, digital enhancements are used to boost the efficiency of a dual-input LDMOS Doherty PA of 500W peak power. It is shown that the improved phase adjustment and the waveform conditioning for the …

    gatech Repository record for Digitally-assisted, efficiency enhanced, linear RF power amplifier architectures (opens in a new tab)

  5. Rf Power Amplifier And Oscillator Design For Reliability And Variability

    CMOS RF circuit design has been an ever-lasting research field. It gained so much attention since RF circuits have high mobility and wide band efficiency, while CMOS technology has the advantage of low cost and better capability of integration. At the same time, IC circuits never stopped scaling …

    ucf Repository record for Rf Power Amplifier And Oscillator Design For Reliability And Variability (opens in a new tab)

  6. Broadband RF Power Amplifier Design Methodology Using Sequential Harmonic Characterization

    Radio Frequency Power Amplifier (RFPA) amplifies the communication signals to the required power level for transmission. It is the most power consuming stage in a transceiver chain; consequently, any improvement in terms of dissipated power and efficiency of the power amplifier affects the overall …

    calgary Repository record for Broadband RF Power Amplifier Design Methodology Using Sequential Harmonic Characterization (opens in a new tab)

  7. 60 Watts Broadband Push Pull RF Power Amplifier Using LTCC Technology

    … paths in modern transmitters. Broadband amplifiers are an essential part of any MMMB transmitter and they are also among the most challenging especially for high power requirements. This work explains why single ended topologies with efficiencies higher than 50% have a fundamental …

    waterloo Repository record for 60 Watts Broadband Push Pull RF Power Amplifier Using LTCC Technology (opens in a new tab)

  8. Analog predistortion for improvement of RF power amplifier efficiency and linearity

    … highly efficient and linear operations of the RF PAs used in wireless communication systems. Particularly, analog predistortion (APD) techniques have been developed while providing higher levels of performance required by 4G cellular systems in this work. Analog circuits such as a variable gain …

    gatech Repository record for Analog predistortion for improvement of RF power amplifier efficiency and linearity (opens in a new tab)

  9. CMOS linear RF power amplifier with fully integrated power combining transformer

    … design of a fully integrated Radio-frequency (RF) linear Power Amplifier( PA) in complementary metal-oxide silicon (CMOS) technology. In this work we analyse the challenges in CMOS PA design as well as the state-of-the-art solutions. One such challenge presented by this technology is the low …

    brazil-ufrgs Repository record for CMOS linear RF power amplifier with fully integrated power combining transformer (opens in a new tab)

  10. A Linear RF Power Amplifier with High Efficiency for Wireless Handsets

    … research presents design techniques for a linear power amplifier with high efficiency in wireless handsets. The power amplifier operates with high efficiency at the saturated output power, maintains high linearity with enhanced efficiency at back-off power levels, and covers a broadband frequency …

    vt Repository record for A Linear RF Power Amplifier with High Efficiency for Wireless Handsets (opens in a new tab)

  11. Behavioural Modeling and Linearization of RF Power Amplifier using Artificial Neural Networks

    Power Amplifiers (PAs) are the key building blocks of the emerging wireless radios systems. They dominate the power consumption and sources of distortion, especially when driven with modulated signals. Several approaches have been devised to characterize the nonlinearity of a PA. Among these …

    waterloo Repository record for Behavioural Modeling and Linearization of RF Power Amplifier using Artificial Neural Networks (opens in a new tab)

  12. Design and analysis of class AB RF power amplifier for wireless communication applications

    The Power Amplifier is the most power-consulting block among the building blocks of RF transceivers. It is still a difficult problem to design power amplifiers, especially for linear, low voltage operation. Until now power amplifiers for wireless applications is being produced almost in GaAs …

    ucf Repository record for Design and analysis of class AB RF power amplifier for wireless communication applications (opens in a new tab)

  13. RF Power Amplifier Modeling and Linearisation for Improved Training and Dimension Reduction Techniques

    The energy used to power cellular communication networks has grown immensely in recent times due to the increased human reliance on the wireless transmission of data. This has led to increased energy consumption of cellular networks, intensified by the advent of the Fifth Generation (5G) …

    maynooth Download PDF for RF Power Amplifier Modeling and Linearisation for Improved Training and Dimension Reduction Techniques (opens in a new tab)

  14. A Constant Conduction Angle Biased RF Power Amplifier for Improved Linearization in Class C Operation

    Class C power amplifiers offer higher efficiency than class B power amplifiers, but suffer from poor linearity. A feedback based biasing system to improve the linearity of a class C power amplifier is designed. A class B amplifier with a gain of 20 dB and 20 MHz bandwidth at 900 MHz acts as the …

    calpoly Repository record for A Constant Conduction Angle Biased RF Power Amplifier for Improved Linearization in Class C Operation (opens in a new tab)

  15. Design and development of the Class E RF power amplifier prototype by using a power MOSFET

    … radar systems, so that they can be carried to perform tasks without human attendance in the dangerous areas. A Class E RF power amplifier prototype with the physical size of 2.9 in x 1.6 in operating at 150 MHz was designed and developed as the first step of the miniaturization process of radar …

    ku Repository record for Design and development of the Class E RF power amplifier prototype by using a power MOSFET (opens in a new tab)

  16. Design of a 10GHz RF power amplifier in 130nm CMOS technology based on Wilkinson combiner methodology

    … a growing demand today to design and fabricate RF power amplifiers at high frequencies above 5GHz that can directly drive a 50Ω antenna with sufficiently high transmission power to meet the needs of various wireless communication applications. This has typically been done by using GaN or other …

    bu Repository record for Design of a 10GHz RF power amplifier in 130nm CMOS technology based on Wilkinson combiner methodology (opens in a new tab)

  17. Development of a High-Efficiency, Low-Power RF Power Amplifier for Use in a High-Temperature Environment

    … a study of the design of a high efficiency, low power, RF power amplifier that can operate over an extended temperature range. The amplifier has been implemented as a hybrid circuit with the active device fabricated in a 0.5μm silicon-on- sapphire CMOS technology and passive components …

    ut-knoxville Repository record for Development of a High-Efficiency, Low-Power RF Power Amplifier for Use in a High-Temperature Environment (opens in a new tab)

Page 1 of 4