Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"RF testing"”.

  1. Spread OFDM via carrier interferometry spreading codes: performance, throughput, and PAPR enhancement

    … not without its limitations - both in terms of performance and Peak-to-Average Power Ratio (PAPR). In this dissertation, the author significantly enhances the performance of traditional OFDM systems via the introduction of novel Carrier Interferometry (Cl) spreading codes. Specifically, this …

    colostate Repository record for Spread OFDM via carrier interferometry spreading codes: performance, throughput, and PAPR enhancement (opens in a new tab)

  2. Scalable algorithms and design for debug hardware for test, validation and security of mixed signal/rf circuits and systems

    … or package. Higher level of integration has made testing, validation of ICs more challenging due to lack of observability of internal circuit nodes. This calls for new embedded Design for Test (DFT) circuit design and test methodology development. This work is geared towards solving the analog/RF …

    gatech Repository record for Scalable algorithms and design for debug hardware for test, validation and security of mixed signal/rf circuits and systems (opens in a new tab)

  3. Development Of Superconducting Rf Sample Host Cavities And Study Of Pit-Induced Cavity Quench

    Superconducting rf (SRF) cavities made of niobium are now approaching their theoretical superheating field limit. Alternative materials such as Nb3 Sn and MgB2 are predicted to have significant higher fields and are very interesting for next generation srf cavities. A high field and high …

    cornell Repository record for Development Of Superconducting Rf Sample Host Cavities And Study Of Pit-Induced Cavity Quench (opens in a new tab)

  4. Advancing the Maximum Accelerating Gradient of Niobium-3 Tin Superconducting Radiofrequency Accelerator Cavities: RF Measurements, Dynamic Temperature Mapping, and Material Growth

    … material for Superconducting Radiofrequency (SRF) particle accelerator cavities. Current SRF accelerators use superconducting niobium accelerator cavities, which are nearing their theoretical limits of performance. Nb3Sn promises increased quality factors, twice the operational temperature (4.2 …

    cornell Repository record for Advancing the Maximum Accelerating Gradient of Niobium-3 Tin Superconducting Radiofrequency Accelerator Cavities: RF Measurements, Dynamic Temperature Mapping, and Material Growth (opens in a new tab)

  5. Markers and outcome measures in chronic immune mediated artrhritis: from association studies to prediction models.

    … in part 2, illustrated by the rheumatoid factor (RF) and anti-citrullinated protein/peptide antibodies (ACPA) determination in rheumatoid arthritis (RA). ACPA is a very specific test for RA, but the specificity of this test may differ between study populations. Combinations of ACPA, RF and …

    ghent Repository record for Markers and outcome measures in chronic immune mediated artrhritis: from association studies to prediction models. (opens in a new tab)

  6. Development of heterodyne receiver technology for sub-millimetre wavelength astronomy

    … of incoming signals which is necessary to perform high-resolution spectroscopic observations. With the advent of telescopes such as the Atacama Large Millimetre/sub-millimetre Array (ALMA) which are set to explore the field for the foreseeable future, there is considerable interest in …

    oxford Repository record for Development of heterodyne receiver technology for sub-millimetre wavelength astronomy (opens in a new tab)

  7. Design and testing of helical antennas for a RF test facility

    RF facilities are necessary to accurately and systematically test multiple types of electronic devices in an electromagnetically quiet environment. Typical RF facilities consist of an anechoic chamber, a room that shields anything inside from external electromagnetic radiation and prevents internal …

    missouri Repository record for Design and testing of helical antennas for a RF test facility (opens in a new tab)

  8. Analytical and numerical modeling, fabrication and RF measurement techniques for RF planar micro-inductors on silicon

    … circuit implementation in silicon, and RF measurement techniques. Although the inductor is widely integrated on silicon, there is still a need for closed form expressions for inductance and the quality factor. In addition, amongst the numerous commercially available simulation packages, …

    rit Repository record for Analytical and numerical modeling, fabrication and RF measurement techniques for RF planar micro-inductors on silicon (opens in a new tab)

  9. Development Of A High Throughput Facility For The RF Characterisation Of Superconducting Thin Films

    … large capital and operational costs and now perform close to their theoretical limits. With future accelerators requiring more sustainable technology, an alternative approach using thin film superconductors deposited on copper cavities is being explored. This would allow significant capital …

    lancaster Download PDF for Development Of A High Throughput Facility For The RF Characterisation Of Superconducting Thin Films (opens in a new tab)

  10. A standardized 3U CubeSat common bus architecture for improving mission success

    … into the CubeSat design process to improve performance and enable higher reliability. In this research, past CubeSat missions were examined to determine whether identifiable trends exist in subsystem failures, including failure mechanisms and contributing factors. Following a systems …

    colostate Repository record for A standardized 3U CubeSat common bus architecture for improving mission success (opens in a new tab)

  11. Built-in-self-test of RF front-end circuitry

    … products and the advent of deep submicron CMOS, RF ICs have become fairly commonplace in the semiconductor market. This has given rise to a new breed of Systems-On-Chip (SOCs) with RF front-ends tightly integrated along with digital, analog and mixed signal circuitry. However, the reliability of …

    rit Repository record for Built-in-self-test of RF front-end circuitry (opens in a new tab)

  12. Constraint-driven RF test stimulus generation and built-in test

    … test challenge for radio frequency (RF) circuits. While the design community has pushed the envelope far into the future, by expanding CMOS process to be used with high-frequency wireless devices, test methodology has not advanced at the same pace. Consequently, testing such devices …

    gatech Repository record for Constraint-driven RF test stimulus generation and built-in test (opens in a new tab)

  13. Tunable Band-Pass Filters with a Wide Tuning Range and Minimum Number of Tuning Elements

    … networks, satellites, defense systems, and RF testing. In wireless communication, they help reduce hardware complexity and cost by replacing multiple fixed-frequency filters and switches. In satellite payloads, tunability enables flexible, multimode operations and reduces the overall weight …

    waterloo Repository record for Tunable Band-Pass Filters with a Wide Tuning Range and Minimum Number of Tuning Elements (opens in a new tab)

  14. Robotic Soft Esophagus Design, Modeling, and Control for Endoprosthetic Stent Testing and Food Swallow Investigation

    … of concern to the patients. Stent Radial Force (RF), force applied by the stent on the esophageal lumen, is a crucial design parameter of a stent for maintaining the in situ lumen patency, which is, unfortunately, still an unknown parameter due to the poorly understood association of the RF and …

    auckland-ms Repository record for Robotic Soft Esophagus Design, Modeling, and Control for Endoprosthetic Stent Testing and Food Swallow Investigation (opens in a new tab)

  15. Efficient Production Testing of High-Performance RF Modules and Systems using Low-Cost ATE

    … to produce quality radio frequency (RF) modules and systems at a low cost. This entails reducing their test cost as well, since the cost of testing modern RF devices can be up to 40% of their manufacturing cost. The high test cost of these devices can be mainly attributed to (a) the …

    gatech Repository record for Efficient Production Testing of High-Performance RF Modules and Systems using Low-Cost ATE (opens in a new tab)

  16. A Methodology for Implementing RF BiSTs in Production Testing to Replace RF Conventional Tests

    Production testing of Radio Frequency (RF) devices is challenging due to the complex nature of the tests that have to be performed to verify functionality. In this dissertation a methodology to replace the complex and expensive RF functional tests with defect-oriented Built-in Self Tests (BiSTs) is …

    arkansas Repository record for A Methodology for Implementing RF BiSTs in Production Testing to Replace RF Conventional Tests (opens in a new tab)

  17. MAGNESIUM DIBORIDE (MGB2) THIN FILMS ON COPPER AND SILICON FOR RADIOFREQUENCY CAVITY AND ELECTRONIC APPLICATIONS

    … wires, superconducting radiofrequency (SRF) cavities, superconducting electronic devices, etc. SRF cavities play an important role in modern particle accelerators. The main objective of an SRF cavity is to accelerate charged particle beams. SRF cavities are characterized by two figures of …

    temple Repository record for MAGNESIUM DIBORIDE (MGB2) THIN FILMS ON COPPER AND SILICON FOR RADIOFREQUENCY CAVITY AND ELECTRONIC APPLICATIONS (opens in a new tab)

  18. Advanced Techniques for Multipactor Testing

    [ES] En los últimos años han proliferado los nuevos sistemas de satélites, sobre todo las grandes constelaciones en las órbitas terrestres bajas. Casi todos los satélites transmiten señales digitales con diversas modulaciones y niveles de potencia. Y no sólo eso, el modelo de negocio exige un …

    upv Repository record for Advanced Techniques for Multipactor Testing (opens in a new tab)

  19. Self-healing RF SoCs: low cost built-in test and control driven simultaneous tuning of multiple performance metrics

    … to a proliferation of highly complex integrated RF system-on-chip (SoC) and system-on-insulator (SoI) solutions. The use of scaled CMOS technologies for high frequency wireless applications is posing daunting technological challenges both in design and manufacturing test. To ensure market …

    gatech Repository record for Self-healing RF SoCs: low cost built-in test and control driven simultaneous tuning of multiple performance metrics (opens in a new tab)

  20. High Power Effects in Microwave Filters for Space Applications

    [ES] Las tendencias actuales en los sistemas de comunicaciones por satélite, que implican la operación en entornos multiportadora, a frecuencias cada vez más elevadas y con mayores exigencias en términos de capacidad de transmisión, hacen necesaria la utilización de mayores niveles de potencia. El …

    upv Repository record for High Power Effects in Microwave Filters for Space Applications (opens in a new tab)