Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"RMGI"”.

  1. Retention Of Cad/Cam Crowns Luted With Resin Cements And Rmgi

    Objectives: To measure retention of lithium disilicate (IPS e.max CAD, Ivoclar Viva-dent) and zirconia reinforced lithium disilicate (CELTRATM DUO, Dentsply) copings luted using resin cements and resin-modified glass ionomer cement. Methods: 110 Extracted human, non-carious mandibular 2nd premolars …

    uab Repository record for Retention Of Cad/Cam Crowns Luted With Resin Cements And Rmgi (opens in a new tab)

  2. Effect of Saliva Contamination on Crown Retention Strengths of Resin and RMGI Cements

    … studied the effects of saliva contamination on RMGIs and resin cements with regards to crown retention rates. Objective: To study the effect of salivary contamination on crown retention strengths of RMGI and resin cements at various stages of bonding and in wet and dry environments. Methods: 100 …

    uab Repository record for Effect of Saliva Contamination on Crown Retention Strengths of Resin and RMGI Cements (opens in a new tab)

  3. The retention of zirconia crowns luted with resin and RMGI cements and the effect of salivary contamination

    … of zirconia crowns bonded with resin and RMGI cements and the effect of salivary contamination following 10,000 cycles of thermocycling. Materials and Methods: 64 extracted human mandibular premolars were divided into eight groups (n = 8/group). The specimens in each group were prepared …

    uab Repository record for The retention of zirconia crowns luted with resin and RMGI cements and the effect of salivary contamination (opens in a new tab)

  4. Effect of Light-Cure Initiation Time on Polymerization and Orthodontic Bond Strength with a Resin-Modified Glass-Ionomer

    … reactions in resin<–>modified glass<–>ionomers (RMGI) are thought to compete with and inhibit one another. The objective of this study was to examine the effect of visible light<–>cure (VLC) delay on the polymerization efficiency and orthodontic bond strength of a dual<–>cured RMGI. Methods: An …

    marquette Repository record for Effect of Light-Cure Initiation Time on Polymerization and Orthodontic Bond Strength with a Resin-Modified Glass-Ionomer (opens in a new tab)

  5. Enamel decalcification and fluoride release among Fuji ortho LC and composite resins: An in vitro and in vivo study.

    … of resin-modified glass ionomer adhesive (RMGI) which has fluoride releasing and recharging properties may be effective in prevention of white spot lesions around orthodontic brackets. The objectives of this study were to compare 1) the amount of fluoride release in vitro, 2) the amount of …

    wvu Repository record for Enamel decalcification and fluoride release among Fuji ortho LC and composite resins: An in vitro and in vivo study. (opens in a new tab)

  6. Enamel conditioning effect on penetration and microleakage of glass ionemer-based sealants

    … (GI) and resin-modified glass ionomer cements (RMGI) used as sealants. Clinically sound extracted human molars were distributed into nine experimental groups (n = 15 each). Group 1 (control) was sealed with resin-based sealant (Delton) following clinically accepted techniques. Groups 2 through 6 …

    iupui Repository record for Enamel conditioning effect on penetration and microleakage of glass ionemer-based sealants (opens in a new tab)

  7. Effect Of Cement Selection On Retention Of Zirconia And Lithium Disilicate Crowns

    … glass ionomer, resin modified glass ionomer (RMGI), resin cements and bioactive cements. Selection of different cements and bonding protocols for zirconia or lithium disilicate crowns to increase their bonding strength remains a clinical challenge for dentists. Objectives: To measure the …

    uab Repository record for Effect Of Cement Selection On Retention Of Zirconia And Lithium Disilicate Crowns (opens in a new tab)

  8. Light-Activation Influence on the Thermal Analysis of a Resin-Modified Glass-Ionomer

    … reactions in resin modified glass ionomers (RMGI) have been shown to compete and possibly inhibit one another during early RMGI development. Earlier beginning times of light polymerization initiation may limit the acid-base reaction and if time allowed for the acid-base components to react is …

    marquette Repository record for Light-Activation Influence on the Thermal Analysis of a Resin-Modified Glass-Ionomer (opens in a new tab)

  9. Effects Of Delayed Polymerization Time and Bracket Manipulation on Orthodontic Resin Modified Glass Ionomer Adhesive

    … score when using a resin modified glass ionomer (RMGI) adhesive. Specimens were divided into three groups of clinically relevant delay times (0.5, 2, and 4-min) to simulate the delay that frequently occurs between bracket placement and manipulation and subsequent light curing. Based on an analysis …

    umkc Repository record for Effects Of Delayed Polymerization Time and Bracket Manipulation on Orthodontic Resin Modified Glass Ionomer Adhesive (opens in a new tab)

  10. Comparison of bond strength between a conventional resin adhesive and a resin-modified glass ionomer adhesive: An in vitro and in vivo study.

    … with a resin-modified glass ionomer adhesive (RMGI) (Fuji Ortho LC, GC America) and a conventional resin adhesive (Light Bond, Reliance Orthodontic Inc.). Two Fuji Ortho LC groups and two Light Bond groups were tested in vitro. Debonding force was determined with an Instron testing machine, and …

    wvu Repository record for Comparison of bond strength between a conventional resin adhesive and a resin-modified glass ionomer adhesive: An in vitro and in vivo study. (opens in a new tab)

  11. Polymerization efficiency of glass-ionomer and resin adhesives under molar bands

    … of a light cured resin modified glass ionomer (RMGI) under molar bands, as compared to a light cured resin and a dual cured resin. The three cements used were Fuji Ortho LC, Eagle Spectrum resin, and Variolink II dual-cure. Each sample was indirectly light cured for 20 seconds (10 seconds …

    marquette Repository record for Polymerization efficiency of glass-ionomer and resin adhesives under molar bands (opens in a new tab)

  12. A clinical comparison of decalcification following orthodontic treatment using composite resin and reinforced modified glass ionomer cements.

    … composite resin or resin modified glass ionomer (RMGI) cements. Varying levels of hygiene and treatment time were also evaluated. Methods: Intraoral pre-treatment and post-treatment photographs from patients bonded with either RMGI or composite resin were evaluated for changes in decalcification. …

    louisville Repository record for A clinical comparison of decalcification following orthodontic treatment using composite resin and reinforced modified glass ionomer cements. (opens in a new tab)

  13. Flexural strength comparison of monolayer resin composite to bilayer resin/ liner composite

    … glass ionomers, resin-modified glass ionomers (RMGI), and flowable composites. The aim of this study was to compare the flexural strength of a monolayer of resin composite with that of a bilayer of resin composite and liner. Four types of RC beams were tested: a monolayer control that is an …

    iupui Repository record for Flexural strength comparison of monolayer resin composite to bilayer resin/ liner composite (opens in a new tab)

  14. The Difference in Fracture Strength of Translucent Zirconia (5Y-Z) Using Different Cements and Surface Treatments

    … showed the highest fracture load compared with RMGI (p < 0.001) in the 5Y-PSZ groups , there was a significant difference in fracture load between 5Y-PSZ (1.0 mm thickness) and lithium disilicate luted with resin , whereas 5Y-PSZ (0.8mm thickness ) had the lowest fracture load with no …

    uab Repository record for The Difference in Fracture Strength of Translucent Zirconia (5Y-Z) Using Different Cements and Surface Treatments (opens in a new tab)

  15. Fracture Strength of Translucent Zirconia Crowns

    … value was shown by Lava Esthetic cemented with a RMGI (Group 7) 3007.4 +/- 320.8c. The crowns milled out of e.max CAD (Group 9) failed the during the load cycle test. Conclusions: The strength of Lava Esthetic and e.max CAD are about 2/3 that of Lava Plus when bonded with a resin cement. All …

    uab Repository record for Fracture Strength of Translucent Zirconia Crowns (opens in a new tab)

  16. Non-Invasive Retrieval of Prefabricated Zirconia Crowns with Er,Cr:YSGG Laser from Primary and Permanent Teeth

    … of prefabricated zirconia crowns cemented with RMGI as a non-invasive alternative to rotary instruments. Methods: Thirteen permanent and 12 primary molars were prepared to dentin and prefabricated zirconia crowns were passively fitted and cemented with two resin modified glass ionomer cements. …

    vcu Repository record for Non-Invasive Retrieval of Prefabricated Zirconia Crowns with Er,Cr:YSGG Laser from Primary and Permanent Teeth (opens in a new tab)

  17. Strength Of Self-Adhesive Resin Cements To Shortened Zirconia Crowns With And Without An Additional Coat Of Adhesive

    … cements with and without bonding agent and a RMGI control). Cementation was performed under a 40 N load, and specimens stored in dH2O. All samples were thermocycled (10,000 cycles, 5-55° C, dwell time of 15 s). Failure mode and retentive bond strength (MPa) was determined with a crosshead …

    uab Repository record for Strength Of Self-Adhesive Resin Cements To Shortened Zirconia Crowns With And Without An Additional Coat Of Adhesive (opens in a new tab)

  18. Understanding and addressing invasive cervical resorption: a systematic review on diagnostic and treatment challenges in permanent dentition

    … ionomer (GI) and resin-modified glass ionomer (RMGI) demonstrated the highest success rates in the treatment of ICR lesions. This review highlights the need for further research to establish standardized diagnostic processes and treatment planning for ICR in permanent dentition. Future research …

    bu Repository record for Understanding and addressing invasive cervical resorption: a systematic review on diagnostic and treatment challenges in permanent dentition (opens in a new tab)

  19. Retention Of Zirconia Crowns Following Different Bonding Protocols

    … Bioactive Cement), RelyX Luting Plus (RMGI Cement) and RelyX Unicem (Self-adhesive resin cement) to extracted teeth following thermocycling. Methods: 30 sound extracted non-carious human molars were collected following IRB approval. The selected molars were notched at the roots and …

    uab Repository record for Retention Of Zirconia Crowns Following Different Bonding Protocols (opens in a new tab)

  20. Bioactive Materials: Ion Release, Flexural Strength, Secondary Caries Depth And Elemental Analysis Of Surrounding Tooth Structure

    … more calcium than all other materials. The RMGI Fuji II LC fluoride release and the caries protection ability were not significantly different than Cention N. Cention N has the ion release favoring possible remineralization.

    uab Repository record for Bioactive Materials: Ion Release, Flexural Strength, Secondary Caries Depth And Elemental Analysis Of Surrounding Tooth Structure (opens in a new tab)

Page 1 of 2