Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"ROLL-TEMPERATURE"”.
-
Experimental and theoretical optimization of thermal calendering process parameters for efficient production of cotton/binder fiber blended nonwovens
… include the top (pattern) and bottom (smooth) roll temperatures of the calendering machine and nip pressure between them. Once a decision on the blend level and speed is made, an acceptable product of quality depends on choosing the appropriate values of the other three parameters. The …
-
Evaluation of calendered activated carbon nonwovens for gas adsorption
… 6 m/min, 250 pli nip pressure, 80°C top calender roll temperature, and a 110°Cbottom calendar roll temperature. The gas adsorption behavior was mathematically modeled. Calculated and experimentally measured adsorption capacities compared favorably, i.e., R<sup>2</sup> 0.9845. The film coefficient …
-
Characterization of thermally calendered cotton/bicomponent blended fabrics by different web formation techniques
… attractive process. To reduce the processing temperatures, to save energy, and enhance the feel of the fabric, binder fibers having low melting points are desirable. Bicomponent fibers provide us with this alternative. The objective of this study is to compare two different types of …
-
Προσομοίωση της κατεργασίας θερμής έλασης κραμάτων αλουμινίου με χρήση πεπερασμένων στοιχείων
… dissertation, the crown evolution during hot rolling of aluminum alloys was studied via the Finite Element Method (FEM), in order to determine the applied force on the mill’s integrated bending system. For the simulation, a FEM model was developed that used the exact geometry of Elvals 4-high …
-
Physical characterization of thermally point-bonded cotton/polyester nonwovens
… ratios were chosen. Three levels of bonding temperatures (408 °K, 422 °K, 436 °K) along with three levels of crush edge pressures (65, 130, 195 kN/m) were used to bond the webs. In an attempt to understand the heat transfer kinetics involved in thermal bonding, two bonding speeds (10 m/min, …
-
Mill roll profile control by means of spray cooling
A 2-dimensional model of a mill roll temperature distribution and radial thermal expansion is presented. The emphasis is on selective axial coolant distribution as a method of controlling strip profile. The Fourier equations describing heat conduction are solved using the method of finite …
-
Non-Linear Finite Element Method Simulation and Modeling of the Cold and Hot Rolling Processes
… finite element model of the hot and cold rolling processes has been developed for flat rolling stock with rectangular cross section. This model can be used to analyze the flat rolling of cold and hot steel rectangular strips under a series of different parameters, providing the rolling …
-
Some problems in hot rolling of al-alloys solved by the finite element method
… finite element method (FEM) to simulate hot flat rolling process. The relevant work involves selecting a suitable constitutive equation, predicting the rolling load and roll torque, computing temperature changes and lateral deformation, simulating the evolution of substructure, modelling static …
-
Βελτιστοποίηση της μικροδομής ελασμάτων αλουμινίου για εφαρμογές υψηλής προστιθέμενης αξίας
… of the crystallographic texture during the rolling process. More specifically, it looks into the effect of the specific thermomechanical processes on the final product properties through the development of the crystallographic texture. The aim was to master the evolution of the …
-
ΔΙΕΡΕΥΝΗΣΗ ΣΥΝΘΗΚΩΝ ΜΕΙΩΣΗΣ ΤΗΣ ΚΑΤΑΠΟΝΗΣΗΣ ΤΩΝ ΚΥΛΙΣΤΡΩΝ ΚΑΤΑ ΤΗΝ ΘΕΡΜΗ ΕΞΕΛΑΣΗ ΕΠΙΠΕΔΩΝ ΕΛΑΣΜΑΤΩΝ
ΣΤΗΝ ΘΕΡΜΗ ΕΞΕΛΑΣΗ ΕΠΙΠΕΔΩΝ ΕΛΑΣΜΑΤΩΝ ΣΥΝΔΥΑΣΜΟΣ ΤΑΣΕΩΝ (ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΘΕΡΜΙΚΩΝ) ΑΝΑΠΤΥΣΣΕΤΑΙ ΣΤΑ ΚΥΛΙΣΤΡΑ ΛΟΓΩ ΤΗΣ ΕΠΑΦΗΣ ΤΩΝ, ΜΕ ΤΟ ΕΛΑΣΜΑ, ΤΟ ΣΥΣΤΗΜΑ ΣΤΗΡΙΞΗΣ ΚΑΙ ΤΟΥΣ ΒΟΗΘΗΤΙΚΟΥΣ ΚΥΛΙΝΔΡΟΥΣ. ΚΟΙΛΑ ΚΥΛΙΣΤΡΑ ΜΕΓΑΛΟΥ ΜΗΚΟΥΣ ΜΕ ΕΣΩΤΕΡΙΚΗ ΠΙΕΣΗ (ΠΡΟΕΝΤΑΣΗ) ΜΠΟΡΟΥΝ ΝΑ ΧΡΗΣΙΜΟΠΟΙΗΘΟΥΝ, ΣΕ ΜΕΡΙΚΕΣ …