Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Radial forces"”.
-
Experimental determination of blade forces in a cross-flow turbine
… tested to determine the magnitude of the fluid forces on the blades. The tangential and radial forces and the torque were measured on a test blade. Because the runner was made of plexiglas, the flow and the effects of the incidence angle at various speeds were observed. The pattern of blade …
-
Torque Ripple Minimization in Switched Reluctance Machines
… machine performance, such as copper losses and radial force production. Traditionally, SRM is controlled using rectangular current profiles which are excited using discrete pulsations. Timing of these pulsations is quantified with conduction angles, and the performance of the machine at a given …
-
Machine Learning Algorithms for Multi-objective Design Optimization of Switched Reluctance Motors (SRMs)
… and significantly reduces the torque ripples. Radial forces constitute a critical objective that should be considered alongside average torque, efficiency, and torque ripple in the design optimization of SRMs. Accurate modeling of radial forces is a prerequisite for optimizing motor geometry to …
-
Development of a test procedure for sputtered gold as a solid film gear tooth lubricant.
… and calibrated to determine tooth contact forces. Calibration of strain gages installed to determine tooth radial forces was attempted but difficulties were encountered in determining a strain reading for the unstressed condition. Based on this work, recommendations for design changes were …
-
Einfluss der Implantationstechnik der Edwards „SAPIEN 3“ Aortenklappenprothese auf die Rate von postprozeduralen AV-Blockierungen
… Edwards SAPIEN 3 is suspected to cause with more radial forces an increase of conduction disturbances and the requirement of a pacemaker postprocedural (about 19%). [16] Method: In our retrospective study, we identified 167 TAVI patients who underwent Edwards SAPIEN 3 aortic valve prosthesis …
-
Symplectic Methods of Classical Mechanics & Regularized Central Force Dynamics
… obtained for inverse square and inverse cubic radial forces (or any superposition thereof). From these solutions, a new set of orbit elements for Kepler-Coulomb dynamics is derived, along with their variational equations for arbitrary perturbations. Governing equations are numerically validated …
-
Mitral valve force balance: a quantitative assessment of annular and subvalvular forces
… a novel transducer was developed to measure the radially directed forces that may act on devices implanted to the mitral annulus. In an ovine model, radial forces were found to statistically increase with left ventricular pressure and were reduced in the setting of ischemic mitral regurgitation. …
-
Design of a Switched Reluctance Motor for a Light Sport Aircraft Application
… are the average torque, torque ripple, and radial forces by integrating the control and geometry design into the proposed framework. A comprehensive design process is carried out with the proposed framework, and a detailed coil design process is performed. The rotor cut-outs are designed to …
-
Biomechanics of the upper limb : applications of motion analysis and force measurement techniques
… on the upper limb, and the muscle and joint forces which oppose them. The second presents parameters defining the biomechanics of knife stab attacks in order to specify standards for the testing of stab resistant body armour. A three dimensional, mathematical model of the elbow and wrist …
-
Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo
… vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor …
-
Design and Development of Cages for the Next Generation Self-Aligning Bearings
… The bearing can also take up both axial and radial forces when the rollers are inclined. By implementing a new bearing cage with lower cost and an excellent dynamic function, the SAT-bearing by SKF could become a strong competitor and the primary alternative for turbine shafts in wind power …
-
Analysis of the Dynamic Interferences Between the Stator and Rotor of a Refrigeration Compressor Motor
… rigid. The displacements due to these forces were examined and then scaled to develop the motor parameters necessary to produce the radial forces required for stator/rotor interference. Several recommendations were then made regarding possible solutions to the interference problem.
-
Theoretical investigation of the initial response of a thin ring to a radial shock pulse
… isotropic ring to a transverse shock pulse, the radial and tangential components of displacement and velocity are found in series form by use of Duhamel's integral. A plane shock front is assumed to propagate normal to a diameter of the ring with constant linear velocity and to be followed by a …
-
DYNAMIC CHARACTERIZATION OF FULLY PARTITIONED DAMPER SEALS
… seals (FPDS). These annular seals develop large radial forces due to the high pressure differentials and gas density, which have a measureable impact on the compressor’s rotordynamic performance. There is an extensive experimental database available for labyrinth seals and textured seals. …
-
Design and Development of Cages for the Next Generation Self-Aligning Bearings
… The bearing can also take up both axial and radial forces when the rollers are inclined. By implementing a new bearing cage with lower cost and an excellent dynamic function, the SAT-bearing by SKF could become a strong competitor and the primary alternative for turbine shafts in wind power …
-
Otimização da estrutura de acionamento para o controle de posição radial de um motor de indução trifásico sem mancais com enrolamento dividido
… produce on the rotor besides the torque, also radial forces that support the rotor in the center of the stator. Thus, these machines do not suffer from the common wear of mechanical bearings, do not require lubrication, operate without noise and are suitable for applications with high …
-
Doubly-Salient Permanent Magnet Flux-Reversal-Free-Stator Switched Reluctance Machines
… only one magnetizing quadrant. Due to unbalanced forces in conventional stator-flux-reversal-free machines, their deployment in industrial and end-user applications has been hindered. The presented hybrid machine has balanced radial forces. Therefore, it maintains the advantages of conventional …
-
Analysis of Force and Torque Harmonic Spectrum in an Induction Machine for Automotive NVH Purposes
… electric motor, caused by the electromagnetic forces, excite its housing and that of the drivetrain, causing a structure-borne vibration. Torque ripple generates excitations in the shaft and gearbox, which are then transmitted to the whole drivetrain housing. It is seen that a low-torque-ripple …
-
Acoustic Noise Reduction in an 8/6 Switched Reluctance Machine using Structural Design
… described. Using the network of FEA tools, nodal forces and natural frequencies of a four phase 8/6 SRM are analyzed to study the acoustic noise and vibration behaviours. The FEA process is validated experimentally by matching measured vibration modes and acoustic noise sound pressure level (SPL) …
-
Evaluation of Stent Retriever Performance and Feasibility of an Auxetic Stent Retriever Design
… focuses on investigating SR behaviors and forces during SR MT that directly influence clot dislodgement in tortuous segments. In vitro thrombectomies were performed in a flow loop with models of increasing complexity to measure the SR removal force (i.e. force to dislodge the device from …
Page 1 of 2