Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Radial injection"”.

  1. Transient Convective Heat Transfer in Closed Containers During and After Gas Injection

    … walled closed containers during and after gas injection. The different modes of heat transfer were identified, and correlations were made for each. Correlations are presented for the injection period, post-top injection, post-bottom injection, post- tangential, post-radial injection, and …

    byu Repository record for Transient Convective Heat Transfer in Closed Containers During and After Gas Injection (opens in a new tab) Download PDF for Transient Convective Heat Transfer in Closed Containers During and After Gas Injection (opens in a new tab)

  2. Constant pressure invasion of viscoplastic suspensions in thin conduits

    … framework to study the interface morphology for radial injection into a Hele-Shaw geometry, where the gap thickness variations are defined using realistic industrial data and a stochastic model. We quantify the interface morphology to investigate the effect of different parameters. Our results …

    ubc Repository record for Constant pressure invasion of viscoplastic suspensions in thin conduits (opens in a new tab) Download PDF for Constant pressure invasion of viscoplastic suspensions in thin conduits (opens in a new tab)

  3. Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying

    … flash boiling atomization (FBA) as a novel injection method in SPS for high solids concentrations, up to 70 wt.%. FBA uses thermodynamic instability to break up a liquid jet. When superheated suspension is accelerated through a nozzle and its pressure drops below the saturation pressure, …

    concordia Download PDF for Flash Boiling Atomization of Suspension for Application of Suspension Plasma Spraying (opens in a new tab)

  4. Laboratory Study of Enhanced Oil Recovery Through Cyclic Solvent Injection in Low-Permeable Rocks

    Cyclic Solvent Injection (CSI), otherwise known as “huff-n-puff solvent injection”, is an essential utility in increasing hydrocarbon production in unconventional reservoirs. Current conventional production is heavily targeted towards high-permeable sandstone reservoirs, whereas a vast amount of …

    calgary Repository record for Laboratory Study of Enhanced Oil Recovery Through Cyclic Solvent Injection in Low-Permeable Rocks (opens in a new tab)

  5. Radial Injector Mixing Effects on Detonation Zone Position in Rotating Detonation Engine

    Radial propellant injection in the annular combustion chamber of a rotating detonation engine (RDE), done in a manner to promote maximum size scale of vortices, has proven to be effective for gaseous propellants. Experiments with an RDE having a 154-mm-diameter annular combustion chamber have …

    washington Repository record for Radial Injector Mixing Effects on Detonation Zone Position in Rotating Detonation Engine (opens in a new tab)

  6. Initiation of Orderly Spinning Detonation Waves via Phased Sparking

    … Second, the fuel and oxidizer were injected radially. To avoid the thrust-area loss of conventional axial injection, all injection holes were oriented along the annulus radially, thereby allowing the high pressure to work over the entire front end area. Furthermore, radial injection modulated …

    washington Repository record for Initiation of Orderly Spinning Detonation Waves via Phased Sparking (opens in a new tab)

  7. An investigation of the effects of flue gas injection on natural draft cooling tower performance

    <p>Flue gas injection into natural draft cooling towers offers a cost effective alternative to reheating scrubbed flue gas, prior to disposal into the atmosphere. A search of the publicly available literature indicates a need to investigate the effects of flue gas injection on natural draft cooling …

    utk-theses Repository record for An investigation of the effects of flue gas injection on natural draft cooling tower performance (opens in a new tab)

  8. Analyzing the Influence of a Swirl Brake on a Smooth Liquid Annular Seal Through Measuring Static and Rotordynamic Characteristics

    … brakes are added. The SB and NSB seals had a radial clearance (Cr) of 203.2 um with the diameter of the seals (D) being 102 mm. The length to diameter ratio (L/D) of the NSB seal was 0.50, while the SB seal had an L/D of 0.45 due to the addition of swirl brakes. The SB seal was tested at three …

    tamu Repository record for Analyzing the Influence of a Swirl Brake on a Smooth Liquid Annular Seal Through Measuring Static and Rotordynamic Characteristics (opens in a new tab)

  9. Dynamics of polyelectrolyte solutions and oil-in-water emulsions in Taylor-Couette flows

    … complex oily bilgewater emulsions using direct radial injection of the emulsion into the flow field. The effect of salinity is also explored in this focus area, as the salt screening of the ionic surfactants used to stabilize the emulsified droplets has a key influence on the droplet coalescence …

    umn Repository record for Dynamics of polyelectrolyte solutions and oil-in-water emulsions in Taylor-Couette flows (opens in a new tab)

  10. Membrane-engineered nanotherapeutic platforms for drug delivery: Hollow fiber membrane synthesis of lipid nanoparticles, biomimetic nanocarriers, and nanobubbles

    … rapid and uniform solvent exchange through radial injection, significantly reducing characteristic mixing length scales and enhancing interfacial area density. This architecture facilitates continuous, high-throughput synthesis of lipid nanoparticles (LNPs) with tunable sizes (-40-200 nm), …

    njit Repository record for Membrane-engineered nanotherapeutic platforms for drug delivery: Hollow fiber membrane synthesis of lipid nanoparticles, biomimetic nanocarriers, and nanobubbles (opens in a new tab)

  11. Numerical Investigations of Fuel-Oxidizer Mixing on the Propagation of a Detonation Wave

    … an annular chamber where high speed discrete injection systems are employed. Improved understanding of the flow physics is required to aid with future designs. Many experiments have shown that the injector configuration can lead to poor mixing between propellants that ultimately leads to …

    gatech Repository record for Numerical Investigations of Fuel-Oxidizer Mixing on the Propagation of a Detonation Wave (opens in a new tab)

  12. Chemical and Hydrodynamic Effects in Polymer-Clay Flocculation: Anisotropic particulate size and surface morphology effects in varied and controlled hydrodynamic fields

    … and counter-rotating Taylor-Couette cell with radial fluid injection has been constructed. The new inner cylinder design does not modify the critical Re for flow instabilities and can precisely inject a desired mass at a desired flow rate. Using the newly designed, modified Taylor-Couette cell, …

    umn Repository record for Chemical and Hydrodynamic Effects in Polymer-Clay Flocculation: Anisotropic particulate size and surface morphology effects in varied and controlled hydrodynamic fields (opens in a new tab)

  13. Numerical Modeling of Suspension and Particle Transport in Thermal Spray Processes

    … domain. In general, the effects of suspension injection velocity, suspension properties, suspension injector location, standoff distance, substrate shape, and gas properties on the coating characteristics can be investigated by this approach. For example, in the case of radial injection of …

    concordia Download PDF for Numerical Modeling of Suspension and Particle Transport in Thermal Spray Processes (opens in a new tab)