Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 79 for “"Railgun"”.

  1. Electrothermal behavior of railgun solid armatures

    … of solid armatures has been at the forefront of railgun research in the U.S. for over a decade. Computational models have matured in parallel with experimental techniques, but experiments resulting in good data on armature behavior have not existed until recently. As a result, there has been …

    texas Repository record for Electrothermal behavior of railgun solid armatures (opens in a new tab) Restricted access

  2. Microwave diagnostics on a railgun plasma

    … interferometry measurements on the High Energy Railgun Apparatus (HERA) at Texas Tech University. Chapter I discusses railguns in general, basic railgun theory, and problems encountered whh railguns. The physical railgun system is described and illustrated as well as the timing and firing …

    ttu Repository record for Microwave diagnostics on a railgun plasma (opens in a new tab)

  3. ELECTROMAGNETIC RAILGUN CAPABILITIES ON AMPHIBIOUS SHIPS

    An electromagnetic railgun (EMRG) is a developmental weapon that utilizes electromagnetic propulsion to launch kinetic projectile attacks against air, sea, and land targets. This new propulsion technology differs from the current arsenal of naval weapons that utilize chemical missile propulsion and …

    nps Repository record for ELECTROMAGNETIC RAILGUN CAPABILITIES ON AMPHIBIOUS SHIPS (opens in a new tab)

  4. Comparison of two railgun power supply architectures to quantify the energy dissipated after the projectile leaves the railgun

    Railgun muzzle flash, or post-fire arcing, is a major concern to the Navy because of the potential associated thermal stresses. In this thesis, we compared two railgun power supplies in Matlab Simulink to quantify their associated post-fire energy. When the armature exits the rails, a finite energy …

    nps Repository record for Comparison of two railgun power supply architectures to quantify the energy dissipated after the projectile leaves the railgun (opens in a new tab)

  5. 3-D MHD plasma armature railgun simulations

    <p>The goal of a plasma armature railgun is to accelerate the projectile to hypervelocities (i.e., to velocities beyond 5 km/s). Despite extensive research, projectile velocities achieved in the plasma armature railgun experiments were under 6-8 km/s - unfortunately, far less than predicted …

    utk-theses Repository record for 3-D MHD plasma armature railgun simulations (opens in a new tab)

  6. DESIGN AND OPTIMIZATION OF AN ELECTROMAGNETIC RAILGUN

    Railgun is a future weapon for shooting long-range targets with high accuracy. Railgun is an economical weapon as it does not use any kind of propellant for shooting a projectile. It uses high impulsive current to generate the necessary force required to hit the target. The US Navy has been …

    mtu Repository record for DESIGN AND OPTIMIZATION OF AN ELECTROMAGNETIC RAILGUN (opens in a new tab)

  7. Electromagnetic Railgun Launchers: Practical and Theoretical Perspectives

    Pulsed power systems, such as railguns, are characterized by extreme quantities that are not found in everyday applications. These extremes result in unique engineering challenges that have kept the railgun in the lab despite decades of development. This dissertation investigates improved …

    vt Repository record for Electromagnetic Railgun Launchers: Practical and Theoretical Perspectives (opens in a new tab)

  8. A multi-stage distributed energy plasma arc railgun

    … of multi-stage distributed energy plasma arc railguns are presented. In collaboration on an Air Force Office of Scientific Research (AFOSR) funded Multidisciplinary University Research Initiative (MURI) project, the Center for Pulsed Power and Power Electronics (P3E) at Texas Tech University …

    ttu Repository record for A multi-stage distributed energy plasma arc railgun (opens in a new tab)

  9. Performance Enhancement and Characterization of an Electromagnetic Railgun

    … also necessary. Cal Poly’s Electromagnetic Railgun was designed with the goal of creating a laboratory system capable of simulating hypervelocity (≥ 3 km/s) impacts. Due to several factors, the system was not previously capable of high-velocity (≥ 1 km/s) tests. A deficient projectile design …

    calpoly Repository record for Performance Enhancement and Characterization of an Electromagnetic Railgun (opens in a new tab)

  10. Design and construction of a one meter electromagnetic railgun

    … through the use of electromagnetic forces (Railguns) has many advantages over conventional methods. Foremost are the higher velocities which can be achieved and the reduction in firing platform sensitivity to hits. Projectile velocities on the order of 3-4 kilometers per second allow the use …

    nps Repository record for Design and construction of a one meter electromagnetic railgun (opens in a new tab)

  11. Operation of the HERA Railgun Facility at Texas Tech

    The HERA Railgun Facility contains a 2 meter long, small bore railgun. Projectiles are injected into the railgun by a light gas injector (LGI). The railgun is to be used as a research tool to help understand the physics behind "velocity saturation" in railguns. Over the past two years, the …

    ttu Repository record for Operation of the HERA Railgun Facility at Texas Tech (opens in a new tab)

  12. A study of the UTSI transaugmented and classical railgun

    … years it has been determined that conventional railguns have nearly reached their velocity limits due to ablation of rail and insulator materials. The UTSI transaugmented railgun was constructed to conduct experiments to investigate the potential of augmentation in increasing the force on the …

    ut-knoxville Repository record for A study of the UTSI transaugmented and classical railgun (opens in a new tab)

  13. Design and optimization of a 600-KJ railgun power

    … is to explore the design options for a 1.2-m railgun power supply capable of accelerating a 150-g to 250-g projectile to 1000 m/s. In order to accomplish this task a MATLAB model will be constructed to conduct trade-off studies between various power supply configurations in an attempt to …

    nps Repository record for Design and optimization of a 600-KJ railgun power (opens in a new tab)

  14. Theoretical design and modeling of an Infantry railgun projectile

    In order for railgun technology to be relevant to the Infantry, the design of the projectile must incorporate the following three concepts: an effective ballistics package, geometries for aerodynamic stability; and a non-parasitic conducting armature. I designed an effective 30mm and scaled 40mm …

    nps Repository record for Theoretical design and modeling of an Infantry railgun projectile (opens in a new tab)

  15. Characterization and magnetic augmentation of a low voltage electromagnetic railgun

    … and the effects of augmentation a 44 cm railgun was constructed and tested. The railgun was powered by a capacitor bank of fourteen 330 V, 600 micro-F capacitors. The velocity of the projectile, the voltage across the capacitors and the current through the rails were measured. The …

    nps Repository record for Characterization and magnetic augmentation of a low voltage electromagnetic railgun (opens in a new tab)

  16. Naval electric weapons the electromagnetic railgun and free electron laser

    Theory and simulations of the railgun and free electron laser are presented, as well as a suggestion for extending the railgun lifecycle. The theory, design, and analysis of an electromagnetic railgun using a numerical model are discussed. The effects of varying electrical pulse formations, rail …

    nps Repository record for Naval electric weapons the electromagnetic railgun and free electron laser (opens in a new tab)

  17. Design and construction of an expandable series trans-augmented electromagnetic railgun

    … electromagnetic launch technology a 1.2 meter railgun was constructed. It was designed to allow augmentation and various bore configurations. The railgun power unit consists of two 11 kV, 830 microfarads capacitors discharging through a 7 micro-H inductor coil. A crowbar circuit provides …

    nps Repository record for Design and construction of an expandable series trans-augmented electromagnetic railgun (opens in a new tab)

  18. An experimental and computational study of magnetic sawing in a railgun

    … studies the process experimentally using a railgun, a form of electromagnetic launcher. The research achieves two main objectives. The first is to develop and test a computational model to predict and avoid the onset of magnetic sawing damage. The second is to experimentally observe and …

    texas Repository record for An experimental and computational study of magnetic sawing in a railgun (opens in a new tab) Restricted access

  19. An investigation of the static force balance of a model railgun

    An interesting debate in railgun research circles is the location, magnitude, and cause of recoil forces, equal and opposite to the launched projectile. The various claims do not appear to be supported by direct experimental observation. The goal of this research paper is to develop an experiment …

    nps Repository record for An investigation of the static force balance of a model railgun (opens in a new tab)

Page 1 of 4