Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 144 for “"Random copolymers"”.

  1. Fundamental Scratch Behavior of Styrene-Acrylonitrile Random Copolymers

    … deformation in styrene-acrylonitrile (SAN) random copolymers. Previous findings from numerical simulation using finite element methods are used to establish correlation between mechanical properties and key scratch deformation mechanisms of the SAN model systems. For SAN, the acrylonitrile …

    tamu Repository record for Fundamental Scratch Behavior of Styrene-Acrylonitrile Random Copolymers (opens in a new tab)

  2. Supramolecular block and random copolymers in multifunctional assemblies

    … self-assembled multifunctional block copolymers. The main results of this thesis include the results that multifunctional block copolymers can be fashioned via ROMP, functionalized in both the main- and side-chains, and self-assembled in an orthogonal fashion. In addition, these …

    gatech Repository record for Supramolecular block and random copolymers in multifunctional assemblies (opens in a new tab)

  3. Crystallization of random copolymers based on poly(hexamethylene adipamide)

    … and time for a series of polyamide 66 copolymers have been studied. Measurements were made of the growth rate of spherulites, the melting temperature, and the lamellar thickness. The lamellar thickness was found to be approximately constant at 1 ½ to 2 chemical repeat units. The growth …

    utk-theses Repository record for Crystallization of random copolymers based on poly(hexamethylene adipamide) (opens in a new tab)

  4. Amphiphilic Block-Random Copolymers as Stabilizers in Emulsion Polymerization

    The objective of this thesis is to explore block-random copolymers of styrene and acrylic acid, PS-b-(PS-r-PAA), as stabilizers in emulsion polymerization. Small molecule surfactants are typically used to stabilize emulsion polymerizations, but they are detrimental to performance properties of the …

    queens Repository record for Amphiphilic Block-Random Copolymers as Stabilizers in Emulsion Polymerization (opens in a new tab)

  5. Amphiphilic And Random Copolymers: Self Assembly And Application In Drug Delivery Formulations

    … water soluble drugs. Recently, amphiphilic and random polymers have attracted considerable attention from researchers in order to elucidate these issues. Amphiphilic polymers consist of both hydrophilic and hydrophobic segments. Amphiphilic polymers are not only limited to drug delivery …

    umn Repository record for Amphiphilic And Random Copolymers: Self Assembly And Application In Drug Delivery Formulations (opens in a new tab)

  6. Amphiphilic Block-Random Copolymers: Aqueous Solution Properties and Use as Stabilizers in Emulsion Polymerization

    … that cannot readily diffuse. Among these, block-random copolymers (BRCs) have emerged as a promising alternative due to their unanticipated ease of dispersion in water and the seemingly robust particle nucleation mechanism observed in emulsion polymerization when they are applied as stabilizers. …

    queens Repository record for Amphiphilic Block-Random Copolymers: Aqueous Solution Properties and Use as Stabilizers in Emulsion Polymerization (opens in a new tab)

  7. Morphology, Crystallization and Melting Behaviors of Random Copolymers of Ethylene with 1-Butene, 1-Pentene and 1-Hexene

    … behaviors of a series of ethylene/alpha-olefin copolymers were investigated as a function of comonomer content, comonomer type and processing conditions, including crystallization temperature and time. This was achieved by using a combination of techniques such as Nuclear Magnetic Resonance …

    vt Repository record for Morphology, Crystallization and Melting Behaviors of Random Copolymers of Ethylene with 1-Butene, 1-Pentene and 1-Hexene (opens in a new tab)

  8. Synthesis and Characterization of Disulfonated Poly(Arylene Ether Sulfone) Random Copolymers as Multipurpose Membranes for Reverse Osmosis and Fuel Cell Applications

    … of several disulfonated poly(arylene ether) random copolymer membranes in fuel cell and reverse osmosis applications. Poly(arylene ether)s were prepared by direct step copolymerization using a third monomer 3,3–-disulfonated 4,4–-dichlorodiphenylsulfone. The membrane properties of a …

    vt Repository record for Synthesis and Characterization of Disulfonated Poly(Arylene Ether Sulfone) Random Copolymers as Multipurpose Membranes for Reverse Osmosis and Fuel Cell Applications (opens in a new tab)

  9. Direct Polymerization Of Sulfonated Poly(arylene ether) Random Copolymers And Poly(imide)Sulfonated Poly(arylene ether) Segmented Copolymers: New Candidates For Proton Exchange Membrane Fuel Cell Material Systems

    … weight, film-forming, ductile, ion conducting copolymers. These were converted to the acid form and investigated as proton exchange membranes for fuel cells. Hydrophilicity increased with the level of sulfonation. However, water sorption increased gradually until about 50 mole percent SDCDPS …

    vt Repository record for Direct Polymerization Of Sulfonated Poly(arylene ether) Random Copolymers And Poly(imide)Sulfonated Poly(arylene ether) Segmented Copolymers: New Candidates For Proton Exchange Membrane Fuel Cell Material Systems (opens in a new tab)

  10. Renewable Bio-Based Polymers and Degradable Functional Polymers

    … applications. In Chapter 4, sustainable graft copolymers derived from renewable cellulose, rosin and fatty acid as novel thermoplastic elastomers were accomplished by ATRP and mechanical properties of the polymers were characterized by tensile stress-strain and creep compliance testing. The …

    south-carolina Repository record for Renewable Bio-Based Polymers and Degradable Functional Polymers (opens in a new tab)

  11. Synthesis and Characterization of New Multifunctional Initiators for Anionic Polymerization and the Use of Poly(4-hydroxystyrene) as a Template for new Polymers

    … of multifunctional alkyne core molecules and random copolymers of polystyrene-co-poly(4-hydroxystyrene) which served as templates for the synthesis of new random copolymers of polystyrene-co-poly(4-propynyloxy)styrene. The newly formed multifunctional alkyne core molecules and alkyne …

    utk-theses Repository record for Synthesis and Characterization of New Multifunctional Initiators for Anionic Polymerization and the Use of Poly(4-hydroxystyrene) as a Template for new Polymers (opens in a new tab)

  12. Structure Property Relationships of Proton Exchange Membranes

    … properties. Most of the hydrocarbon based random copolymers reported in the literature show reduced proton conductivity at low water content. This was attributed to the formation of an isolated morphology. Over the last few years our group has synthesized thermally stable multiblock …

    vt Repository record for Structure Property Relationships of Proton Exchange Membranes (opens in a new tab)

  13. Ανάπτυξη και μελέτη λειτουργικών συμπολυμερών που φέρουν βιοστατικές ομάδες

    … of novel environmentally friendly functional copolymers bearing groups with antimicrobial activity was attempted. For the synthesis of the copolymers, appropriate characteristic units were selected, and, depending on the functionality and the purpose of their use, they can be classified into …

    greece Repository record for Ανάπτυξη και μελέτη λειτουργικών συμπολυμερών που φέρουν βιοστατικές ομάδες (opens in a new tab)

  14. Amphiphilic Diblock Copolymers as Stabilizers in Emulsion Polymerization

    … stabilizers is worthwhile. Amphiphilic diblock copolymers are a promising type of emulsion polymerization stabilizer and are the focus of this work. First, the tolerance of an amphiphilic diblock copolymer stabilizer’s performance to high molecular weight dispersity and homopolymer impurity has …

    queens Repository record for Amphiphilic Diblock Copolymers as Stabilizers in Emulsion Polymerization (opens in a new tab)

  15. The melting behavior and structure of ethylene copolymers from metallocene catalysts

    <p>Ethylene/1-octene copolymers produced using metallocene catalysts have a homogeneous comonomer content with respect to molecular weight. Two series of molecular weight having 1-octene content ranging from zero to thirty nine branches per 1000 carbon atoms, have been studied. The influence of …

    utk-theses Repository record for The melting behavior and structure of ethylene copolymers from metallocene catalysts (opens in a new tab)

  16. Studies of n-Channel Organic Field-Effect Transistors Based on Naphthalene Diimide-Based Copolymers

    … by PNDITz, PNDITS and a series of NDI-based random copolymers, TSxBS, where x = 0, 10, 20, 50, consisting of naphthalene diimide (NDI), triselenophene (TS), and biselenophene (BS) to demonstrate their electrical properties. The PNDITz OFETs demonstrated poor electron mobility and high …

    washington Repository record for Studies of n-Channel Organic Field-Effect Transistors Based on Naphthalene Diimide-Based Copolymers (opens in a new tab)

Page 1 of 8