Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 260 for “"Rate Effects"”.

  1. Rate effects for monopile foundations

    … which is cyclic in nature, with the loading rate and load eccentricity varying with time. Under extreme conditions, such as the emergency stop of the turbine, yawing or ship impact, transient loading is applied to the monopile, and a high loading rate is induced in the surrounding soil. With …

    oxford Repository record for Rate effects for monopile foundations (opens in a new tab)

  2. Rate Effects in Bulk Forming

    … forming processes and examines the way in which rate effects have been accommodated. The upper bound method, which is an approximate analytical technique, is reviewed in detail. The concept of a tangential shear zone of constant shear strain rate is introduced and used to enable strain rate …

    mcmaster Repository record for Rate Effects in Bulk Forming (opens in a new tab)

  3. Rate Effects in Fine Grained Soils

    The strain rate dependent behaviour of fine grained soils is an important aspect of geotechnical engineering. During dynamic or rapid events such as earthquakes and rapid pile testing, a fine grained soil will display significantly different behaviour than may be observed over the long life span of …

    dundee Repository record for Rate Effects in Fine Grained Soils (opens in a new tab) Download PDF for Rate Effects in Fine Grained Soils (opens in a new tab)

  4. Understanding Rate Effects in Cohesive Soils

    … for soils to withstand extreme loading from the effects of blast and fragmentation prompts the understanding of soil behaviour within these loading regimes to be of great significance, especially to enable the development of more rigorous soil models and proficient methods for design engineers to …

    whiterose Download PDF for Understanding Rate Effects in Cohesive Soils (opens in a new tab)

  5. Strain-rate effects in quartz sand

    … to protect personnel and key assets from the effects of blast and fragmentation. The behaviour of soils in these extreme loading regimes is not well understood, and so designers require data at these high pressures and strain rates in order to develop robust soil constitutive models and adapt …

    whiterose Download PDF for Strain-rate effects in quartz sand (opens in a new tab)

  6. Wear rate effects on strength of bone

    The wear rate sensitivity of hardness and strength is a key parameter for evaluating the surface integrity of a machined bone. The wear rate is presented as a parameter that accounts for the increase in strength, hardness, and decrease in toughness. The wear rate parameter is both a function of the …

    ttu Repository record for Wear rate effects on strength of bone (opens in a new tab)

  7. Interest rate effects in modern industrial economies

    … the relationships between nominal interest rates, nominal spending, real output, the price level and the money supply. The essence of the study constitutes chapters three, four and five which follow a review of the literature in chapter two. In chapter three it was found that nominal …

    utk-theses Repository record for Interest rate effects in modern industrial economies (opens in a new tab)

  8. STRAIN-HARDENING AND RATE EFFECTS IN PLASTICITY

    In this study the effects of strain-hardening and rate sensitivity in plasticity theory are investigated. Because the method of characteristics cannot be applied to problems involving rate dependent yield conditions (65) therefore a different procedure is developed. In this investigation of large …

    rice Repository record for STRAIN-HARDENING AND RATE EFFECTS IN PLASTICITY (opens in a new tab)

  9. Feed Rate Effects In Freeform Filament Extrusion

    … of materials. The FFE 3D printing process operates by feeding thermoplastic filament through a heated nozzle while the nozzle "draws" the desired pattern one layer upon the next. The output from these hobby style FFE 3D printers is often less than ideal in large part because users lack an …

    rit Repository record for Feed Rate Effects In Freeform Filament Extrusion (opens in a new tab)

  10. Rate effects of rapid loading in clay soils.

    … between the shear strength of the clay and the rate at which it is loaded is relevant to the application of a new rapid load pile testing technique called Statnamic. There are problems associated with interpreting the test results in clay soils due to the non linear variation in shear resistance …

    whiterose Download PDF for Rate effects of rapid loading in clay soils. (opens in a new tab)

  11. Strain rate effects on inelastic response of beams

    Thesis (M.S.)--Michigan State University. Dept. of Civil Engineering, 1965

    msu Repository record for Strain rate effects on inelastic response of beams (opens in a new tab)

  12. Strain rate effects in one-dimensional consolidation of peat

    A series of one-dimensional strain rate controlled consolidation tests were performed on remolded peat to establish the void ratio - effective stress - strain rate relationship for this soil. The relationship was found to be independent of the size of sample. In addition, the void ratio - …

    ubc Repository record for Strain rate effects in one-dimensional consolidation of peat (opens in a new tab) Download PDF for Strain rate effects in one-dimensional consolidation of peat (opens in a new tab)

  13. Rate effects and low stress strength of Winnipeg clay

    … the influence of test duration and strain rate on the stress-strain behaviour of Lake Agassiz clay from Winnipeg. 2. to examine the strength of Winnipeg clay at low stress levels. The study also investigated the Undrained Strength of the clay at Large Strains (USALS) and its relationship …

    manitoba Repository record for Rate effects and low stress strength of Winnipeg clay (opens in a new tab)

  14. Dual-phase microalloyed steels: temperature and cooling rate effects

    Includes bibliographical references (pages 173-175).

    colo-mines Repository record for Dual-phase microalloyed steels: temperature and cooling rate effects (opens in a new tab)

  15. Loading Rate Effects on Axial Pile Capacity in Clays

    … can damage the pile and may not produce accurate results. There is a relatively new testing method called the Statnamic Testing Method which tests foundation piles at a very fast rate, but still slower than with dynamic tests. As the rate at which load is applied to a test pile increases, the …

    byu Repository record for Loading Rate Effects on Axial Pile Capacity in Clays (opens in a new tab) Download PDF for Loading Rate Effects on Axial Pile Capacity in Clays (opens in a new tab)

  16. Frame rate effects on human spatial perception in video intelligence

    This thesis examines the effect that the frame rate of a streaming video feed has on one's ability to maintain spatial perception. It defines the current technologies available to capture and encode digital video. It describes the current and near future wireless information systems that could be …

    nps Repository record for Frame rate effects on human spatial perception in video intelligence (opens in a new tab)

  17. Synergistic and dose rate effects in Boron Neutron Capture Therapy

    … delivering a BNCT irradiation at differing dose rates. In mixed photon alpha particle irradiations, no synergistic effect was observed above the response from the separate components. Maximum alpha particle doses delivered were 2.54 Gy. In mixed X-ray and alpha particle exposures, no synergy …

    birmingham Download PDF for Synergistic and dose rate effects in Boron Neutron Capture Therapy (opens in a new tab)

  18. Modeling of strain rate effects on clay in simple shear

    … SIMPLE DSS model is expanded to account for the effects of strain rate on clays in simple shear conditions. The response of clay soils is highly dependent on the rate of strain for both effective stress path and stress-strain behavior. The undrained shear strength is strongly influenced by strain …

    tamu Repository record for Modeling of strain rate effects on clay in simple shear (opens in a new tab)

Page 1 of 13