Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 266 for “"Rate capability"”.

  1. Novel Scintillator Development for High Rate Capability Neutron Scattering Detectors

    … large area neutron detectors with high count rate capability is a growing priority. The current state-of-the-art ZnS:Ag/<sup>6</sup>LiF scintillation detectors are count rate limited by fundamental luminescence mechanisms. In this work two novel scintillators for high count rate capability …

    bristol Repository record for Novel Scintillator Development for High Rate Capability Neutron Scattering Detectors (opens in a new tab) Download PDF for Novel Scintillator Development for High Rate Capability Neutron Scattering Detectors (opens in a new tab)

  2. Vanadyl Ethylene Glycolate for Aqueous Zinc-Ion Batteries with High Rate Capability and Ultralong Cycling Stability

    … Zn/VEG batteries exhibit a high Zn ion storage capability, a long cycling stability as well as an impressive rate performance. In addition, the intercalation pseudocapacitance behavior, the ultrafast Zn-ion diffusion kinetics as well as the high electronic conductivity of VEG are confirmed via …

    washington Repository record for Vanadyl Ethylene Glycolate for Aqueous Zinc-Ion Batteries with High Rate Capability and Ultralong Cycling Stability (opens in a new tab)

  3. Carbon Nanotube Thin Film Supported by Nickel Nanotube Array as Supercapacitor Electrode with Improved Rate Capability

    … f-CNT particles deposition on nickel substrates with constant voltage and constant current modes. Combined scanning electron microscopy and electrochemical analysis elucidate that the best rate capability is achieved when f-CNT thin films conformally wrap NiNTs and provide the fastest …

    iastate Repository record for Carbon Nanotube Thin Film Supported by Nickel Nanotube Array as Supercapacitor Electrode with Improved Rate Capability (opens in a new tab)

  4. Silicon Carbon Nanotube Lithium Ion Batteries

    … However, capacity fading with cycling and low rate capability prevent widespread use. Here, three studies on differing aspects of these batteries are presented. Here, three studies on differing aspects of these batteries are presented. The first examines the rate capability of these batteries. …

    byu Repository record for Silicon Carbon Nanotube Lithium Ion Batteries (opens in a new tab) Download PDF for Silicon Carbon Nanotube Lithium Ion Batteries (opens in a new tab)

  5. Nickel-Seeded Silicon Nanowires Grown on Graphene as Anode Material for Lithium Ion Batteries

    … renewable energy storage. However, capacity and rate (power) limitations of current lithium-ion battery technology hinder its ability to meet the high energy demands in a competitive and reliable fashion. Silicon is an element with very high capacity to Li-ion storage although commercially …

    waterloo Repository record for Nickel-Seeded Silicon Nanowires Grown on Graphene as Anode Material for Lithium Ion Batteries (opens in a new tab)

  6. Enhancement In Electrochemical Performance Of Advanced Battery Electrodes Using Carbon- Nanomaterial Composites

    … leads to high impedance, low capacity and low rate capability. To overcome this bottleneck, we have developed multiple approaches to improve the conductivity of LiFePO4. Motivated by the outstanding electronic and mechanical properties as well as high surface area of graphene, we prepared …

    wayne-thes Repository record for Enhancement In Electrochemical Performance Of Advanced Battery Electrodes Using Carbon- Nanomaterial Composites (opens in a new tab)

  7. Nanocarbon-containing High Power Cathode for Rechargeable Hybrid Aqueous Battery

    … as well as longer cycle life. However, the rate capability of the LiMn2O4 cathode is intrinsically low, which leads to the low capacity at a high current density operation. One strategy to increase the rate capability of the LiMn2O4 cathode is adding conductive additives (e.g., acetylene …

    waterloo Repository record for Nanocarbon-containing High Power Cathode for Rechargeable Hybrid Aqueous Battery (opens in a new tab)

  8. HYBRID CATHODES FOR HIGH-RATE-CAPABLE LITHIUM-SULFUR BATTERIES

    … (Li-S) batteries, particularly under high-rate conditions. Sulfur-infused MC, combined with a binder and conductive graphenic materials including graphene nanoribbons (GNRs) and reduced graphene oxide (rGO) microsheets, is deposited onto the current collector via an air-controlled …

    cornell Repository record for HYBRID CATHODES FOR HIGH-RATE-CAPABLE LITHIUM-SULFUR BATTERIES (opens in a new tab) Embargoed until 2028-06-22

  9. NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES

    … in smart grids, the energy density and the rate capability of LIBs and SIBs must be improved, which urges the exploitation of novel composite cathode or anode materials high specific capacity, high rate capability, especially stability and capacity retention when battery undergoes an extreme …

    nus Repository record for NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES (opens in a new tab) Download file for NANOSTRUCTURED MATERIALS FOR ALKALIS ION BATTERIES AND THEIR MECHANISTIC STUDIES (opens in a new tab)

  10. SPINEL-BASED CATHODE MATERIALS FOR HIGH ENERGY/POWER LITHIUM ION BATTERIES

    … so far been hindered since they encounter poor rate capability and cycle stability. The objective of the present study is therefore focused on developing suitable spinel cathodes with enhanced electrochemical performance. To achieve this objective, morphological modification, surface coating, …

    nus Repository record for SPINEL-BASED CATHODE MATERIALS FOR HIGH ENERGY/POWER LITHIUM ION BATTERIES (opens in a new tab) Download file for SPINEL-BASED CATHODE MATERIALS FOR HIGH ENERGY/POWER LITHIUM ION BATTERIES (opens in a new tab)

  11. In-situ synthesis of NiMoO4 on Ni foam as a binder-free electrode for supercapacitor

    … can reach 0.724 F/cm2 followed with outstanding rate capability (70.1% capacitance retention when current density increase from 1 mA/cm2 to 10 mA/cm2). The excellent areal capacitance and rate capability may be attributed to its interconnected NiMoO4 nanosheets and good adhesion between …

    mtu Repository record for In-situ synthesis of NiMoO4 on Ni foam as a binder-free electrode for supercapacitor (opens in a new tab)

  12. Understanding the Effect of Crystalline Structure and Atomic Arrangement in Metal Oxide Electrodes for Sodium Ion Batteries

    … voltages as well as poor cycling stability and rate capability remain issues for its practical application. This dissertation presents the study which suggests that the increase of crystallinity in anatase TiO2 nanoparticle electrode leads to better electrochemical performance in terms of …

    boise Repository record for Understanding the Effect of Crystalline Structure and Atomic Arrangement in Metal Oxide Electrodes for Sodium Ion Batteries (opens in a new tab)

  13. Design of slurry processed electrodes and separators for the integration in sulfide-based all-solid-state batteries

    … cycling (incl. rapid aging testing), C-rate capability testing as well as impedance spectroscopy.<br>The development of a thin separator (25 – 35 μm) focused on two approaches: self-standing and bilayer casting. In the bilayer casting approach, a layer of solid electrolyte slurry was …

    freiburg-diss Repository record for Design of slurry processed electrodes and separators for the integration in sulfide-based all-solid-state batteries (opens in a new tab)

  14. A High Rate Pixelated Neutron Detector for Neutron Reflectometry at the Spallation Neutron Source

    <p>This work presents the development of a high-rate 6Li-based pixelated neutron detector for neutron reflectometry instruments at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory. The current detector technology falls short on the instrument requirements, particularly on the …

    utk-theses Repository record for A High Rate Pixelated Neutron Detector for Neutron Reflectometry at the Spallation Neutron Source (opens in a new tab)

  15. Optimising P-type Na0.67Mn0.9Mg0.1O2 cathodes via synthesis method, doping, and phase composition

    … The biotemplated materials exhibited better rate capability than the solid state synthesised materials. These differences manifested despite synthesis methods for each phase using identical 20 h calcination regimes. In Chapter 4, P-type NMMO was produced using only a biotemplating synthesis, …

    whiterose Download PDF for Optimising P-type Na0.67Mn0.9Mg0.1O2 cathodes via synthesis method, doping, and phase composition (opens in a new tab)

  16. POLYMER NANO-DIELECTRICS FOR HIGH DENSITY ENERGY STORAGE

    … ranging from kHz to MHz. These power density and rate capability requirements necessitate the use of dielectric capacitors that store energy via polarization of electrons in molecular scale dipoles. Multiphase polymer composites and all-polymer dielectrics could be new kinds of materials to meet …

    south-carolina Repository record for POLYMER NANO-DIELECTRICS FOR HIGH DENSITY ENERGY STORAGE (opens in a new tab)

  17. The Microstructure, Hydrogen Storage Properties, and Electrochemical Behaviors of La-Y-Ca-Mg-Ni AB3 type Hydrogen Storage Alloy.

    … formation of corrosion products and elevation of rate capability at higher discharge rate. However excessive Y in the alloy would lead to a decrease in maximum capacity. Overall the electrodes made by La0.42Y0.22Ca0.78Mg1.01Ni9 alloy exhibited the best performance; the cycle stability was improved …

    unsw Repository record for The Microstructure, Hydrogen Storage Properties, and Electrochemical Behaviors of La-Y-Ca-Mg-Ni AB3 type Hydrogen Storage Alloy. (opens in a new tab)

  18. Exploring the Potential of Ionothermal Syntheses for High-performance Lithium-ion Battery Anode Materials

    … are still lacking strength in the charging rate-capability and thereby cannot fulfill future application requirements in electrical vehicles [EVs].</p> <p>Particularly, graphite with a high theoretical specific capacity of 372 mAh/g is unsuitable for EVs due to the safety concerns of …

    utk-theses Repository record for Exploring the Potential of Ionothermal Syntheses for High-performance Lithium-ion Battery Anode Materials (opens in a new tab)

  19. Crystal chemistry, chemical stability, and electrochemical properties of layered oxide cathodes of lithium ion batteries

    … such as the capacity, cyclability, and rate capability of various layered LiNi1-y-zMnyCozO2 cathodes. A quantitative determination of proton contents in various chemically delithiated oxide cathodes using Prompt Gamma Ray Activation Analysis (PGAA) indicates that while the delithiated …

    texas Repository record for Crystal chemistry, chemical stability, and electrochemical properties of layered oxide cathodes of lithium ion batteries (opens in a new tab)

Page 1 of 14