Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 30 for “"Rayleigh surface waves"”.
-
Optical generation of tone-burst Rayleigh surface waves for nonlinear ultrasonic measurements
… of sources such as coupling variability, and the surface roughness at the transducer/specimen interface. The inherently small higherharmonic signals can be significantly influenced by the changes in contact conditions, especially in nonlinear ultrasonic measurements. For this reason, the …
-
Characterization of fatigue damage in A36 steel specimens using nonlinear Rayleigh surface waves
… failure. In this research, nonlinear Rayleigh surface waves are used to characterize damage in A36 steel specimens caused by monotonic tension and low cycle fatigue. Fatigue damage produces the increased acoustic nonlinearity that leads to the generation of measurable higher harmonics …
-
Evaluation of near surface material degradation in concrete using nonlinear Rayleigh surface waves
… corrosion in metals, etc., begin at the surface. In such cases, ultrasonic Rayleigh surface waves are especially appropriate for detection and characterization of damage since their energy is concentrated in the top layer of the test object. For the civil engineering infrastructure, only …
-
From Craton to Present Mountains - The Scandinavian Lithosphere Imaged by Rayleigh Surface Waves and Ambient Noise
… is missing. In my dissertation, I use earthquake surface waves and ambient noise to image the crustal and mantle structure aiming to provide new clues about the topography’s origin. The focus is also on exploring structural differences between the various tectonic domains. Here, I benefit from the …
-
Air-coupled detection of Rayleigh surface waves to assess material nonlinearity due to precipitation in alloy steel
Nonlinear ultrasonic waves have demonstrated high sensitivities to various microstructural changes in metal including coherent precipitates; these precipitates introduce a strain field in the lattice structure. The thermal aging of certain alloy steels leads to the formation of coherent …
-
Nonlinear Ultrasonics: Signal Processing Considerations and a Nonlinear Parameter for Rayleigh Waves
… is defined for harmonic longitudinal plane waves and it depends on the ratio of the amplitudes of the first harmonic of the exciting signal and the second harmonic. A reliable measurement of the amplitudes of these harmonics is crucial since their amplitude of the second (higher) harmonic is …
-
A micromechanical model for the nonlinearity of microcracks in random distributions and their effect on higher harmonic Rayleigh wave generation
… the modeling of randomly distributed surface-breaking microcracks and their effects on higher harmonic generation in Rayleigh surface waves. The modeling is based on micromechanical considerations of rough surface contact. The nonlinear behavior of a single microcrack is described by a …
-
Using nonlinear ultrasound measurements to assess the stage of thermal damage in modified 9%Cr ferritic martensitic steel
… investigates second harmonic generation in Rayleigh surface waves propagating in 9%Cr ferritic martensitic steel. Previous experimental results show that the nonlinearity parameter is sensitive to certain changes in a material's properties such as thermal embrittlement and hardness changes. …
-
Evaluation of stress corrosion cracking in sensitized 304 stainless steel using nonlinear Rayleigh waves
This research uses nonlinear Rayleigh surface waves to characterize stress corrosion cracking (SCC) damage in sensitized 304 Stainless Steel (304 SS). 304 SS is widely used in reactor pressure vessels and fuel pipelines, where a corrosive environment in combination with applied stress due to high …
-
Generation and Detection of Higher Harmonics in Rayleigh Waves Using Laser Ultrasound
This research studies higher harmonics of Rayleigh surface waves propagating in nickel base superalloys. Rayleigh waves are used because they carry most of the energy and travel along the surface of a specimen where fatigue damage is typically initiated. The energy concentration near the free …
-
Feasibility of Single-Point Excitation Ultrasonic Force Microscopy
… to create and detect the motion of tip-induced surface waves and thereby study nanoscale surface dynamics. Before committing to the construction of an instrument, we investigate the theoretical feasibility of such a novel instrument to determine if the expected amplitude of induced surface waves …
-
Experimental characterization of stress corrosion cracking sensitization in austenitic stainless steel using nonlinear ultrasonic Rayleigh waves
… in austenitic stainless steel. Ultrasonic Rayleigh surface waves are generated on a specimen; as these waves pass through sensitized material, second harmonic generation (SHG) increases. In austenitic stainless steel with oven-induced sensitization, this increase is due only to the …
-
Effect of beam diffraction on nonlinear Rayleigh surface wave measurement
… from a source of finite width on nonlinear Rayleigh wave propagation in an elastic half space. Previous work has shown that nonlinear ultrasonic Rayleigh waves can be used to evaluate material damage due to plastic deformation and fatigue. In this measurement, a relatively small wedge …
-
Second harmonic Rayleigh wave detection using a heterodyne laser interferometer
… state. Optical detection of second harmonic Rayleigh waves by means of a heterodyne laser interferometer has advantages over traditional detection techniques such as contact transducers. Laser detection is a non-contact point measurement, which provides absolute readings of the surface …
-
Nonlinear ultrasonic technique for the characterization of microstructure in additive materials
… techniques based on the transmission of Rayleigh surface waves are used to measure the acoustic nonlinearity parameter, β. Stainless steel specimens are made through three procedures: traditional wrought manufacturing; powder bed fusion (PBF); and laser engineered net shaping (LENS). The …
-
Μεθοδολογίες δυναμικού νανοσκοπικού χαρακτηρισμού υλικών με ακουστικές πηγές παραγόμενες από υπερβραχείς παλμούς λέιζερ
… by ultrashort laser pulses. The acoustic waves are generated in thin-film metal transducers that convert the laser pulse energy into elastic waves. For the generation of such acoustical sources both nanosecond and femtosecond laser pulses are used. Dynamic, whole-field interferometric …
-
Acoustoelastic effects of surface waves in concrete subjected to compressive and bending stresses
… on the study of acoustoelastic effects on Rayleigh surface waves (R-waves) in concrete samples subjected to 4-point load bending and uniaxial compression, considering a broad range of strain levels. The main objectives are (1) to study individually the acoustoelastic effects in tension and …
-
Propagation of Rayleigh waves in thin films
… applications in microelectronics and control of surface properties, the interest in mechanical properties of thin films has grown tremendously. Mechanical defects such as creep, fracture and adhesion loss, play a very important role in physical instabilities of thin film materials. An acoustic …
-
The second harmonic generation in reflection mode - an analytical, numerical and experimental study
… to simple setups such as through-transmission or Rayleigh surface waves. Recent research has evaluated the second harmonic generation in P- and SV- waves reflected from a stress-free surface to enable the single-sided interrogation of a specimen. This research considers the second harmonic …
Page 1 of 2