Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"Reaction Heat"”.
-
Mathematical methods for the Boltzmann equation in the context of chemically reactive gases
… as well as chemical physics. First, we study the reaction heat influence on the steady detonation wave. Then, we analyze the influence of both the reaction heat and the activation energy, on the stability spectrum of the steady detonation wave. Finally, we thoroughly construct the simple reacting …
-
A study of the fission product release from a badly damaged water-cooled reactor
… The vaporization of fission products by decay heat, the effects of the metal-water reaction, the deposition of particulate inventory in reactor vessels and the leakage through the multiple containments are all considered in this model.</p><p>The calculation shows that the vaporization of …
-
Modeling and simulation of heat of mixing in li ion batteries
Heat generation is a major safety concern in the design and development of Li ion batteries (LIBs) for large scale applications, such as electric vehicles. The total heat generation in LIBs includes entropic heat, enthalpy, reaction heat, and heat of mixing. The main objective of this study is to …
-
ΜΟΝΤΕΛΟΠΟΙΗΣΗ ΤΗΣ ΠΥΡΟΛΥΣΗΣ ΛΙΓΝΟΚΥΤΤΑΡΙΚΩΝ ΥΛΙΚΩΝ
… THE KINETICS OF BOTH PRIMARY AND SECONDARY REACTIONS AS ALSO TRANSPORT PHENOMENA. MODELLING WAS BASED ON EXPERIMENTAL DATA OBTAINED BY MEANS OF THERMAL ANALYSIS TECHNIQUES. THE MODEL OF INTERMEDIATE STEP COMPOSITION IS CORRELATED TOTHE PYROLYSIS RATE BY MEANS OF A SIMPLE ADDITIVE MODEL. …
-
Modeling packed bed catalytic reactors
… and solid phases. Heterogeneous and homogeneous reactions are used to convey the required stoichiometry, reaction rate, and heat release rate. Reaction in each phase is modeled as a one-step, global reaction. Heat and mass transfer, fluid friction, and axial heat conduction in the solid phase are …
-
The Simulation of a Controlled Tubular Reactor with Counter-current Heat Transfer
… simulation used an analogue computer for the reaction kinetics and the mass balance while all of the thermal features existed in real plant with continuous interaction between the computer and plant items. In particular the computer had flowrate and temperature input signals from the plant as …
-
Comparision of constant retort temperature and variable retort temperature thermal processes for quality improvement or cost reduction of conduction-heated canned foods
… of canned foods are the results of various reactions, including Maillard reaction. Heat treatment affects the surface color of canned foods. Surface color changes measured by HunterLab are used to predict both chemical and quality changes in canned foods. In this study I examined the surface …
-
Modeling Injection and Ignition in Direct Injection Natural Gas Engines
… discretized model can describe the transient heat transfer, and adequately represents the thin layers of heat penetration and the local temperature difference due to the cold gas jet impingement. The virtual gas sub-layer model considers complicated physical processes, such as chemical …
-
Reaction enthalpies of metal-polyimide interface formation observed by calorimetry
… forming a metallic overlayer, while the reaction heat is measured in-situ with a pyroelectric sensor. Differential enthalpies of interface formation are derived from the calorimetry data and reported as a function of metal coverage. The ability of the instrument to resolve the underlying …
-
Calcium vapour deposition on semiconducting polymers studied by adsorption calorimetry and visible light absorption
… All three polymers behave differently in their reaction kinetics with calcium. On MEH-PPV we measure 45 μJ/cm² of heat generated in excess of the heat of bulk metal growth, 120 μJ/cm² for MEH-PPP, and 100 μJ/cm² for P3HT. Comparison of the MEH-PPV and MEHPPP data indicate that the initial …
-
The Cascade Control of a Partially Simulated Continuous Stirred Tank Reactor
… action. A signal representing the calculated reaction heat generation is transmitted back to the plant to implement the release of the required exothermic heat of reaction from electrical heating elements. The corrective signal from the simulated control action is also transmitted to the real …
-
Heat Transfer In Multi-layer Energetic Nanofilm On Composites Substrate
… and numerical description related to the reaction of the multilayer nano energetic material (nEM) in dense film. Energy density of nEM is much higher than the conventional energetic material; therefore, nEM finds more applications in propulsions, thermal batteries, material synthesis, nano …
-
Effect of nanoclay fillers on wood adhesives and particle board properties
… process of both UF and MF resin and reduced the reaction heat of curing, and the addition of coupling agent together with Closite30B further compounded this effect. Nanofil116 significantly delayed the curing reaction of both resins and decreased the heat of reaction. The coupling agent had a …
-
MICROWAVE RADIATION POLYMERIZATION OF EPOXY RESINS
… the epoxy microwave radiation and thermal heating reactions. The epoxy microwave radiation curing reaction degrees were directly affected by microwave radiation power, radiation time, and the sample volume. A higher microwave radiation power, a longer period of radiation time, and a larger …
-
Combustion Irreversibility Analysis And Reduction
… of the individual contributors (chemical reaction, heat transfer, mass transfer and viscous dissipation) to the overall exergy destruction in the two approaches, however, were quite different. The IAM predicted that the chemical reaction was the dominant contributor (at 80.56%), while the …
-
Finite element modelling and experimental measurement of the mechanical properties of Nb3Sn multi-filamentary composite superconducting wires
… at room temperature and 77 K. The effect of the reaction heat-treatment process on the stress-strain behaviour was investigated and this showed that it would not be possible to improve the mechanical properties, while at the same time maintaining satisfactory superconducting properties, by …
-
Experimental Validation of a Novel Fischer Tropsch Tubular Fixed Bed Reactor Under Supercritical Conditions
… (FTS) is a trade-off since each reactor type (reaction phase) has its strengths and weaknesses. In order to overcome many of the limitations of the conventional FTS reactors, supercritical fluids (SCF) were proposed to be used as a reaction medium. SCF act as a unique reaction media, offering …
-
Catalytic Light Hydrocarbon Upgrading under Methane Environment
… in terms of higher H/C atomic ratio, higher heating value and lower bromine number compared with its N2 counterpart. The study on the reaction intermediates, where olefins are converted to naphthenes under methane environment over Ir and Pd modified ZSM-5 catalysts, displays that the allylic …
-
Splicing of human GABAB receptor subunit 1 (GABAB1) in non-alcoholic and alcoholic brains
… and T4 polynucleotide kinase (T4PNK) reaction. Heat fragmentation and OptiKinase treatment removed the read pile-ups and gaps including the sequence biases. The identification of RNaseIII target sequences can be incorporated into methods of miRNA gene prediction. These data showed the …
-
The role of heat transfer and varying physical properties in the laminar flow tubular reactor for homogeneous liquid phase reactions: A numerical study.
… of the reactor were closely tied to the heat transfer occurring in the reactor. Three regimes of heat transfer behaviour were identified. These three regimes were instrumental in the effect that varying physical properties had upon reactor performance. In the high heat transfer regime it …
Page 1 of 2