Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 104 for “"Reactive Extrusion"”.
-
Reactive extrusion with star-polycaprolactione
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 2000
-
Copolymerisation of polyesters using reactive extrusion
… than commercial PBAT. Upscaling this process in reactive extrusion revealed that a screw configuration constructed with at least 50% kneading blocks is necessary to achieve critical processing parameters, including a minimum residence time of four minutes and an average degree of fill of 0.5. In …
-
Reactive Extrusion of Active Packaging Materials
… the PP-g-MA from 1708 cm -1 to 1702 cm -1 post extrusion suggests the formation of the maleimide group in the treated sample. The nonmigratory status of the treated polymer was confirmed with a 10 - day migration assay in food relevant solvents with a maximum migration rate of 0.022 mg / cm 2 in …
-
Phosphorylation of starch by reactive extrusion
… a drying process. Cross-linking of starch by reactive extrusion can reduce reaction time and eliminate the need for a drying process. The objectives of this study were to cross-link starch with phosphorus in an extruder, thereby reducing water absorption and solubility of starch. In the first …
-
Modification of polylactide via reactive extrusion
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1995
-
Development of biodegradable materials by reactive extrusion
… nonbiodegradable polymers by biodegradable ones. Reactive extrusion (REX) has been used as an attractive method to prepare new polymeric materials. It allows to prepare new materials, in the melt, by blending, polymerization, grafting, branching and functionalization. Polymerization or chemical …
-
Chemical modification of polysaccharides using reactive extrusion
… of this dissertation was to study the use of reactive extrusion for the chemical modifications of starch and cellulose. A carboxymethyl derivative of starch and carboxymethyl and acetate derivatives of cellulose were prepared using reactive extrusion. Carboxymethyl starch with rapid swelling …
-
Peroxide Degradation of Polypropylene during Reactive Extrusion
… means of peroxide initiated degradation during reactive extrusion has been studied experimentally and numerically. Experiments were carried out using various amounts of a peroxide to promote chain scission reactions for the purpose of modifying the molecular weight distribution of commercial …
-
REACTIVE EXTRUSION OF PHOSPHATE CROSSLINKED POTATO STARCH
… starch has a much narrow processing window in extrusion machinery for manufacturing thermoplastic starch. Statistical analysis of differential scanning calorimetry data aided in extrusion processing design and optimization.</p> <p>Then, bulk crosslinking of potato starch with sodium …
-
Studies on polymer alloying using reactive extrusion
Thesis (M. S.)--Michigan State University. Department of Chemical Engineering, 1997
-
Free Radical-Mediated Reactive Extrusion of Commodity Polymers
… poly (propylene) (PP) and poly(lactide) (PLA) by reactive extrusion. Peroxide-mediated melt-state reactive extrusion in the presence of mesate and acrylate-based coagents was implemented to introduce branching and enhance the strain hardening, crystallization kinetics and solid state properties of …
-
PHYSICS BASED MODELING AND CONTROL OF REACTIVE EXTRUSION
… to characterize the steady-state behavior of an extrusion process. Due to the complex rheological behavior of polymer flow in the extruder, few have felt that the RTD would be independent of changes in operating conditions for the same screw configuration. To investigate, we are asserting that …
-
Monomer recovery from nylon carpets via reactive extrusion
… were determined. These parameters were used in a reactive extrusion model for depolymerizing nylon 6 in carpet. Data from the model was then used to do cost analysis for the process. It was found that to get a Present Value Ratio greater than 1, the flow rate has to be greater than or equal to 500 …
-
Chemical thermoplasticization of lignocellulosic fibers by reactive extrusion
… and, consequently, to develop an economical reactive process focused on diminishing the use of expensive solvents in the thermoplasticization of lignocellulose. The thermoplasticization of lignocellulosic fibers started by developing a high solids content (60 wt%) twin-screw extrusion …
-
Numerical Simulations of Reactive Extrusion in Twin Screw Extruders
… analyzed by means of numerical simulations. This reactive extrusion (REX) operation is simulated by implementing (i) a one-dimensional and (ii) a three-dimensional (3D) modeling approach. In the case of the 1D modeling, a REX mathematical model previously developed and implemented as a computer …
-
Reactive Extrusion of Phosphate Cross-linked Resistant Pea Starches
… of this study were to develop an effective reactive extrusion process to produce granular phosphorylated pea starches with enhanced enzyme resistance, and examine the effects of bulk phosphorylation conditions on the morphology, physicochemical and functional properties of extruded pea …
-
Studies in reactive extrusion processing of biodegradable polymeric materials
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering, 2004
-
Starch liquefaction by thermostable alpha-amylase during reactive extrusion
Thesis (Ph.D.)--Michigan State University. Department of Agricultural Engineering, 1989
-
Printability of highly viscous composite slurries via reactive extrusion additive manufacturing
… thermosetting polymers via a novel AM technique, reactive extrusion AM (REAM). In REAM the resin and curing agent from two separate reservoirs are pumped and mixed directly inside the nozzle and deposited layer-by-layer onto a print-bed. The process utilizes exothermic resin/catalyst systems with …
Page 1 of 6