Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 92 for “"Reactive Sputtering"”.

  1. Power conversion and control for pulsed magnetron reactive sputtering

    The application of reactive sputtering is pervasive in the field of thin film coatings. This dissertation addresses process dynamics during and after arc response shutdown, dual magnetron reactive co-sputtering process control requirements, and pulsed pow er supply requirements for high pow er …

    colostate Repository record for Power conversion and control for pulsed magnetron reactive sputtering (opens in a new tab)

  2. Optical modeling off-stoichiometric amorphous Al2O3 thin films deposited by reactive sputtering

    … thin films were deposited by the reactive sputtering, which enabled us to vary the composition of films by controlling the oxygen flow ratio fed into the deposition system. The composition of the films was investigated with X-ray photoelectron spectroscopy (XPS). This technique …

    uiuc Repository record for Optical modeling off-stoichiometric amorphous Al2O3 thin films deposited by reactive sputtering (opens in a new tab)

  3. Electron localisation in non-stoichimetric films of aluminum nitride produced by reactive sputtering

    Sputtering is a very versatile process for the fabrication of thin solid Gims. The subject of this thesis concerns the study of thin films of non-stoichiometric aluminum nitride fabricated by voltage-controlled reactive sputtering. Using the cathode voltage on the sputtering target, the relative …

    ubc Repository record for Electron localisation in non-stoichimetric films of aluminum nitride produced by reactive sputtering (opens in a new tab) Download PDF for Electron localisation in non-stoichimetric films of aluminum nitride produced by reactive sputtering (opens in a new tab)

  4. An evaluation of oxide films of lead and tellurium prepared by reactive sputtering

    … tellurium, and their alloys were deposited by reactive sputtering onto substrates and analyzed by X-ray emission spectrography. The sputtering process involved the bombardment of a metallic cathode with positive ions in an atmosphere containing oxygen. The preparation and analysis of these …

    njit Repository record for An evaluation of oxide films of lead and tellurium prepared by reactive sputtering (opens in a new tab)

  5. Mechanisms of voltage controlled reactive sputtering and physical properties of reactively sputtered cermet films

    This thesis deals with the mechanisms involved in reactively sputtering a metal target in an Inert/reactive gas glow discharge and with the electrical transport and optical properties of A1/A1N granular metal (or cermet) films produced by this technique. Experiments are described in which an A1 …

    ubc Repository record for Mechanisms of voltage controlled reactive sputtering and physical properties of reactively sputtered cermet films (opens in a new tab) Download PDF for Mechanisms of voltage controlled reactive sputtering and physical properties of reactively sputtered cermet films (opens in a new tab)

  6. Deposition and Characterization of Indium Nitride and Aluminum Nitride Thin Films by Reactive Sputtering

    … quality III-Nitrides thin films with the help of Reactive Magnetron Sputtering on various substrates. Various characterization techniques are used to analyze the samples and understand the effect of various deposition parameters on the quality of the films.

    odu Repository record for Deposition and Characterization of Indium Nitride and Aluminum Nitride Thin Films by Reactive Sputtering (opens in a new tab)

  7. The development of novel reactive sputtering methods in the study of strontium bismuth tantalate

    … there does not yet exist a viable plasma sputtering method for complex oxides such as the lead- and bismuth-containing perovskites. In fact, the lack of reproducibility in any vapor deposition means for such materials is the primary reason why the promise of nonvolatile ferroelectric RAM …

    arizona-thes Repository record for The development of novel reactive sputtering methods in the study of strontium bismuth tantalate (opens in a new tab)

  8. Control of Thin-Film Silicon Microstructure With Low-Energy Particle Bombardment in Reactive Sputtering

    Hydrogen can be added to the growth chamber to promote a phase change to nanocrystalline silicon at moderate growth temperatures. The growth flux with hydrogen includes energetic (∼100eV) neutral H, produced by the reflection of H2+ions from the target. We determine the kinetic role of these …

    uiuc Repository record for Control of Thin-Film Silicon Microstructure With Low-Energy Particle Bombardment in Reactive Sputtering (opens in a new tab)

  9. Deposition, Characterization, and Fabrication of a Zinc Oxide Piezoelectric Thin Film Microspeaker Using DC Reactive Sputtering

    … fabricated using a thin film ZnO layer that was reactively DC sputtered onto a single crystalline n-type silicon substrate. When tested the microspeaker did not produce sound due to complications in the etching process, the thickness of the diaphragms, and clamping effects. Instead, a …

    calpoly Repository record for Deposition, Characterization, and Fabrication of a Zinc Oxide Piezoelectric Thin Film Microspeaker Using DC Reactive Sputtering (opens in a new tab)

  10. Characterization of the growth flux during the deposition of hydrogenated amorphous silicon by DC magnetron reactive sputtering

    Item marked as restricted to the 'UIUC Users [automated]' Group (id=2) by Howard Ding (hding2@illinois.edu) on 2011-05-07T15:06:59Z Item is restricted indefinitely.

    uiuc Repository record for Characterization of the growth flux during the deposition of hydrogenated amorphous silicon by DC magnetron reactive sputtering (opens in a new tab)

  11. Mechanisms of the Reactive Sputtering of Indium in Argon-Nitrogen and Nitrogen-Oxygen Discharges: Growth of Indium-Nitride, Indium-Oxynitride and Indium-Oxide Films

    Made available in DSpace on 2014-12-14T16:00:42Z (GMT). No. of bitstreams: 1 8009116.pdf: 4068822 bytes, checksum: 396bc6d13f3353256bf717f4c6cf9bf5 (MD5) Previous issue date: 1979

    uiuc Repository record for Mechanisms of the Reactive Sputtering of Indium in Argon-Nitrogen and Nitrogen-Oxygen Discharges: Growth of Indium-Nitride, Indium-Oxynitride and Indium-Oxide Films (opens in a new tab)

  12. Deposition and characterization of HfO₂ thin films

    … and silicon wafer substrates using magnetron RF reactive sputtering techniques. Structure and morphology of the thin films were investigated by x-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Results revealed that the sputtered HfO₂ thin …

    vt Repository record for Deposition and characterization of HfO₂ thin films (opens in a new tab)

  13. Gate dielectrics on strained SiGe

    … high-k gate dielectric ZrO2 using DC magnetron reactive sputtering have been investigated for SiGe applications in this work. A low temperature gate quality silicon dioxide process has been developed using Remote Plasma Chemical Vapor Deposition (RPCVD). By carefully controlling the background …

    texas Repository record for Gate dielectrics on strained SiGe (opens in a new tab) Restricted access

  14. Investigation of the SiN Deposition and effect of the hydrogenation on solid-phase crystallisation of evaporated thin-film silicon solar cells on glass

    … observed. A series of SiN film depositions by reactive sputtering were also performed to optimize the deposition process. Parameters adjusted during the deposition were nitrogen flow rate, substrate bias, and substrate temperature. By investigating the deposition rate, refractive index, and …

    unsw Repository record for Investigation of the SiN Deposition and effect of the hydrogenation on solid-phase crystallisation of evaporated thin-film silicon solar cells on glass (opens in a new tab)

  15. Modeling the reactive magnetron sputtering process

    Reactive magnetron sputtering is a versatile plasma technique to deposit thin layers of compound material on all kind of objects. The purpose of these thin films is to add or enhance interesting properties to the object. The term ``thin'' should here be interpreted as ranging from a few nanometers …

    ghent Repository record for Modeling the reactive magnetron sputtering process (opens in a new tab)

  16. Preparation and properties of reactively sputtered copper oxide films

    The deposition of thin copper oxide films by reactive sputtering has been investigated from both experimental and theoretical standpoints. Experimental work utilized both r.f. and d.c. sputtering in argon/oxygen mixtures. The film properties of [O]/[Cu] compositional ratio, optical constants and …

    ubc Repository record for Preparation and properties of reactively sputtered copper oxide films (opens in a new tab) Download PDF for Preparation and properties of reactively sputtered copper oxide films (opens in a new tab)

  17. Aluminum Nitride Contour Mode Resonators

    … process development of aluminum nitride by RF reactive sputtering at RIT. Finite element analysis was performed on a number of factors of aluminum nitride contour mode resonators (CMR) from piezoelectric film thickness, to electrode pitch, electrode thickness and electrode configuration; to …

    rit Repository record for Aluminum Nitride Contour Mode Resonators (opens in a new tab)

  18. Chemically Enhanced Physical Vapor Deposition (Cepvd) of Tantalum Nitride-Based Films for Diffusion Barrier Layers Used in ULSI Devices

    … phenomena. The model stems from the knowledge of reactive sputtering and PECVD processes as well as the acquired CEPVD experiment results. It correlates the processing parameters with the target and film surface coverage by Ta, TaN and organic sites, from which one can predict the operation mode, …

    uiuc Repository record for Chemically Enhanced Physical Vapor Deposition (Cepvd) of Tantalum Nitride-Based Films for Diffusion Barrier Layers Used in ULSI Devices (opens in a new tab)

  19. A study of transparent P-type semiconducting oxide Cu-Al-O

    … (PLD) and radio-frequency (RF) magnetron sputtering. Reactive sputtering of metallic Cu and Al targets were also investigated in the environment of Ar/O2. Cu/Al atomic ratio close to 1-to-1 was achieved. The films prepared by PLD and sputtering of single-oxide target showed poor …

    nus Repository record for A study of transparent P-type semiconducting oxide Cu-Al-O (opens in a new tab) Download file for A study of transparent P-type semiconducting oxide Cu-Al-O (opens in a new tab)

Page 1 of 5