Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 344 for “"Reactive-ion etching"”.

  1. Reactive ion etching investigation for quartz and lithium niobate

    Reactive Ion Etching (RIE) is used to etch single crystal quartz, lithium niobate and amorphous silicon dioxide. In this dry etching process, Freon 116 (C2F6) gas was used to etch a groove in the three materials. Various etching techniques, plasma chemistry, fabrication processes and experimental …

    ucf Repository record for Reactive ion etching investigation for quartz and lithium niobate (opens in a new tab)

  2. Cryogenic deep reactive ion etching of silicon micro and nanostructures

    This thesis focuses on cryogenic deep reactive ion etching (DRIE) and presents how it can be applied to the fabrication of silicon micro- and nanostructures that have applications in microfluidics and micromechanics. The cryogenic DRIE process relies on inductively coupled SF6/O2 plasma at …

    aalto Repository record for Cryogenic deep reactive ion etching of silicon micro and nanostructures (opens in a new tab)

  3. Damage effects to Si-SiO2 structures due to reactive ion etching

    … to the Si ? SiO<sub>2</sub> structures due to Reactive Ion Etching (RIE). The research was carried out on Si ? SiO<sub>2</sub> MOS capacitors which were fabricated using RIE and wet etch (Hydrofluoric acid etch (HFE)) Process. The experiment was carried out using CV technique and Ellipsometry. …

    njit Repository record for Damage effects to Si-SiO2 structures due to reactive ion etching (opens in a new tab)

  4. Particle formation during reactive ion etching of silicon with SF(6)

    Particle formation during low pressure SF6/argon etching of silicon in a single wafer parallel plate reactor is studied. Particles are extracted from the exhaust and collected on the wafer. Particle composition and morphology depend on plasma power, etch time, gas composition, and pressure. Primary …

    arizona-thes Repository record for Particle formation during reactive ion etching of silicon with SF(6) (opens in a new tab)

  5. Characterization of reactive ion etching of III-V compound semiconductor materials

    Reactive ion etching (RIE) of III-V compound semiconductor materials such as InP, InGaAs, InAlAs, and InGaAsP in methane (CH$\sb4$) gas mixtures has been investigated. Etch rates of 800, 400 and 600 A are obtained for InP, InGaAs, and InGaAsP, respectively. Optimum processes have been developed for …

    uiuc Repository record for Characterization of reactive ion etching of III-V compound semiconductor materials (opens in a new tab)

  6. Elementary processes in alkane-based reactive ion etching of III-V semiconductors

    Reactive ion etching (RIE) is a process used extensively in the microelectronics industry. Recently, the use of alkane-based plasmas has been developed for the etching of compound semiconductors. However, due to the complex nature of the plasma environment, relatively little is known about the …

    ubc Repository record for Elementary processes in alkane-based reactive ion etching of III-V semiconductors (opens in a new tab) Download PDF for Elementary processes in alkane-based reactive ion etching of III-V semiconductors (opens in a new tab)

  7. In situ laser etch-depth monitoring of the deep reactive ion etching process

    … for measuring feature thickness during the deep reactive ion etching process is investigated. Interference occurs between laser beam reflections from the mask surface, the mask/silicon interface, and the exposed silicon surface of a process wafer. Information from this interference signal allows …

    njit Repository record for In situ laser etch-depth monitoring of the deep reactive ion etching process (opens in a new tab)

  8. Process Characterization of the Reactive-Ion Etching of Borosilicate Glass for Microfluidic Channels

    … easy to manipulate, PDMS does have its limitations. These include its tendency to swell when it comes in contact with certain chemicals and its hydrophobicity, which makes it difficult to analyze aqueous samples. Glass is an alternative material that addresses both issues. Etching is used to …

    calpoly Repository record for Process Characterization of the Reactive-Ion Etching of Borosilicate Glass for Microfluidic Channels (opens in a new tab)

  9. Optimization of Reactive Ion Etching to Fabricate Silicon Nitride Stencil Masks in SF6 Plasma

    Stencil masks are used to print ultra-high resolution patterns using helium ion/atom beam lithography and are often manufactured from thin, free-standing silicon nitride membranes. The masks have sub-200nm openings etched through the thickness of the membrane using a reactive ion etch (RIE) process …

    houston Repository record for Optimization of Reactive Ion Etching to Fabricate Silicon Nitride Stencil Masks in SF6 Plasma (opens in a new tab)

  10. Hard mask exploration for high aspect ratio deep-reactive ion etching of silicon carbide

    … that can be used for high performance application. In this thesis, bulk monocrystalline silicon carbide (SiC) was used as an alternative for MEMS resonators as it offers advantages to silicon in terms of energy bandgap, environmental robustness, and internal dissipation limits. In particular, …

    gatech Repository record for Hard mask exploration for high aspect ratio deep-reactive ion etching of silicon carbide (opens in a new tab)

  11. In situ monitoring of reactive ion etching using a surface micromachined integrated resonant sensor

    … technique for monitoring film thickness in the reactive etching process that incorporates a micromachined sensor. The sensor correlates film thickness with changes in resonant frequency that occurs in the micromachined platform during etching. The sensor consists of a platform that is suspended …

    gatech Repository record for In situ monitoring of reactive ion etching using a surface micromachined integrated resonant sensor (opens in a new tab)

  12. Cleaning of tin debris by reactive ion etching in a discharge-produced EUV plasma source

    … is a promising candidate for the next generation of lithography technique to continue Moore's law. Moore's law has been upheld by shrinking the feature size on devices and driving the development of faster and denser integrated chips. The short wavelength (13.5±0.2 nm) of EUV light enables …

    uiuc Repository record for Cleaning of tin debris by reactive ion etching in a discharge-produced EUV plasma source (opens in a new tab)

  13. Application of multivariable and intelligent control strategies for improving plasma characteristics in reactive ion etching

    Reactive Ion Etching (RIE) is a critical technology for modern VLSI circuit fabrication and is used at many stages of the manufacturing process. Several real-time control strategies such as Proportional-Integral ( PI ) self-tuning, Linear Quadratic Gaussian ( LQG ), stochastic adaptive control, …

    concordia Download PDF for Application of multivariable and intelligent control strategies for improving plasma characteristics in reactive ion etching (opens in a new tab)

  14. A study of reactive ion etching of gallium arsenide in mixtures of methane and hydrogen plasmas

    The aim of this research was to investigate the reactive ion etching (RIE) of gallium arsenide (GaAs) in mixtures of methane and hydrogen (CH ₄H₂) plasma and to evaluate thier advantages over chlorinated plasmas. This was performed in order to find the optimum etching conditions for GaAs such as, …

    middlesex Download PDF for A study of reactive ion etching of gallium arsenide in mixtures of methane and hydrogen plasmas (opens in a new tab)

  15. Reactive ion etching of indium phosphide-based heterostructures and field-effect transistors using hydrogen bromide plasma

    A new highly selective reactive ion etching process based on HBr plasma for the removal of InGaAs over InAlAs has been developed and the results are presented. The etch selectivity at a self-bias voltage of $-$100 V is over 160, which is the highest that has been reported for this material system …

    uiuc Repository record for Reactive ion etching of indium phosphide-based heterostructures and field-effect transistors using hydrogen bromide plasma (opens in a new tab)

Page 1 of 18