Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 90 for “"Reactivity Ratios"”.

  1. Determination of relative reactivity ratios (copolymerization parameters) for styrene and acrylamidostearic acid

    … to low conversion. The values for the relative reactivity ratios are as follows: r1 = 2.12, r2 = 0.36. These were determined by plotting the data according to the equations of Fineman and Ross: F(f-1)/f = r2*(F2/f)-r2 (f-1)/F= -r2*(f/F2) + r1 where F=F1/F2 (F1 and F2 are the initial mole …

    bu Repository record for Determination of relative reactivity ratios (copolymerization parameters) for styrene and acrylamidostearic acid (opens in a new tab)

  2. Investigation of Reactivity Ratios for the AMPS/AAm/AAc Terpolymer and Associated Copolymers

    … these optimally designed experiments, accurate reactivity ratio estimates were determined for AMPS/AAm, AMPS/AAc and AMPS/AAm/AAc. To better understand the error associated with each system, reactivity ratio point estimates for both the binary and ternary systems were presented using joint …

    waterloo Repository record for Investigation of Reactivity Ratios for the AMPS/AAm/AAc Terpolymer and Associated Copolymers (opens in a new tab)

  3. I. Reactivity Ratios of Some Vinyl Esters. Ii. Block Copolymers of Butadiene and Styrene

    Made available in DSpace on 2014-12-05T19:36:38Z (GMT). No. of bitstreams: 1 0023319.pdf: 5103818 bytes, checksum: 786840632e0633b96801ed4cf4ce7bbf (MD5) Previous issue date: 1957

    uiuc Repository record for I. Reactivity Ratios of Some Vinyl Esters. Ii. Block Copolymers of Butadiene and Styrene (opens in a new tab)

  4. Determination of Reactivity Ratios for Acrylonitrile/Methyl Acrylate Radical Copolymerization Via Nonlinear Methodologies Using Real Time FTIR

    Reactivity ratios for the homogeneous free radical initiated copolymerization of acrylonitrile and methyl acrylate were measured by NMR on isolated, low conversion copolymers and by real time in situ FTIR. The system utilized azobisisobutyronitrile (AIBN) initiator in dimethyl formamide (DMF) at …

    vt Repository record for Determination of Reactivity Ratios for Acrylonitrile/Methyl Acrylate Radical Copolymerization Via Nonlinear Methodologies Using Real Time FTIR (opens in a new tab)

  5. Development of a Pilot-Scale Polymerization Facility and Monomer Preparation for the Determination of Reactivity Ratios for Tetrafluoroethylene (TFE)-Based Copolymers

    … the facility has been used to study the relative reactivity ratios of various polymerizations systems like the copolymerization of TFE with sulfonyl fluoride-substituted vinyl ethers [(perfluoro-3-oxa-4-pentene sulfonyl fluoride [DOW monomer] and perfluoro-2-(2-fluorosulfonylethoxy) propyl vinyl …

    clemson Repository record for Development of a Pilot-Scale Polymerization Facility and Monomer Preparation for the Determination of Reactivity Ratios for Tetrafluoroethylene (TFE)-Based Copolymers (opens in a new tab)

  6. Reactivity ratio estimation in multicomponent polymerizations using the error-in-variables-model (EVM) framework

    … of monomers are expressed as monomers reactivity ratios. Predicting and controlling polymer composition from the knowledge of monomer concentrations and their reactivity ratios is crucial to research in this field and the polymerization industry due to the clear impact of polymer chain …

    waterloo Repository record for Reactivity ratio estimation in multicomponent polymerizations using the error-in-variables-model (EVM) framework (opens in a new tab)

  7. Aminolysis of the 4-acetoxybenzoate anion catalysed by cyclodextrins

    … amine are obtained. For Ì-CD, values of the reactivity ratios for the linear amines are low (<1) implying deceleration of the aminolysis reaction due to binding to the CD. In the case of Ý-CD, the reactivity ratios are slightly larger (>1 for both n -alkyl and branched amines), implying …

    concordia Download PDF for Aminolysis of the 4-acetoxybenzoate anion catalysed by cyclodextrins (opens in a new tab)

  8. Clarifying Multi-Component Polymerization Kinetics for Tailoring Properties of Acrylamide/Acrylic Acid Copolymers for Enhanced Oil Recovery

    … of reaction kinetics for this copolymerization. Reactivity ratios for AAm/AAc copolymerization system exhibit considerable scatter in the published literature, and therefore, there was a need for more definitive values for these reactivity ratios. An appropriate methodology, based on the …

    waterloo Repository record for Clarifying Multi-Component Polymerization Kinetics for Tailoring Properties of Acrylamide/Acrylic Acid Copolymers for Enhanced Oil Recovery (opens in a new tab)

  9. Reactivity ratio estimation: Two case studies.

    … These studies focused on the determination of reactivity ratios: important copolymerization kinetic parameters. They are used to predict multicomponent polymer composition directly and have an indirect influence on the prediction of polymerization rate and final properties. In some cases, these …

    ottawa-retro Repository record for Reactivity ratio estimation: Two case studies. (opens in a new tab)

  10. Lignin acrylate derivatives and their behaviors in free radical copolymerizations

    … were initiated by benzoyl peroxide. The monomer reactivity ratios were investigated for these copolymerization combinations. The copolymer compositions were analyzed by UV for GIU-co-MMA and HPGIU-co-MMA, while methoxyl content determination by HI-GC was used to determine compositions of …

    vt Repository record for Lignin acrylate derivatives and their behaviors in free radical copolymerizations (opens in a new tab)

  11. A Kinetic Study of Acrylamide/ Acrylic Acid Copolymerization

    … composition, microstructure and properties. The reactivity ratios for copolymerization of AAm and AA have been shown to be dependent on pH and they also change with reaction solvent. The present experimental investigation has been performed to study the kinetics of copolymerization of these …

    waterloo Repository record for A Kinetic Study of Acrylamide/ Acrylic Acid Copolymerization (opens in a new tab)

  12. Copolymers of poly(methylenephosphine)s : characterization and application in polymer-supported catalysis

    … by edHSQC NMR spectroscopy and GPC. The reactivity ratios between PA and BA monomers were determined using the Fineman-Ross linear method and the Mayo-Lewis graphical method. The reactivity ratios were rPA = 18.1, rBA = 0.670 and rPA = 22.7, rBA = 0.784 from both methods, respectively. …

    ubc Repository record for Copolymers of poly(methylenephosphine)s : characterization and application in polymer-supported catalysis (opens in a new tab) Download PDF for Copolymers of poly(methylenephosphine)s : characterization and application in polymer-supported catalysis (opens in a new tab)

  13. Reactivity Ratio Estimation Aspects in Multicomponent Polymerizations at Low and High Conversion Levels

    Estimation of reactivity ratios from cumulative copolymerization models eliminates the difficulties associated with stopping reactions at low conversion, while one gains to study the full polymerization trajectory. The parameter estimation technique used in this research is the …

    waterloo Repository record for Reactivity Ratio Estimation Aspects in Multicomponent Polymerizations at Low and High Conversion Levels (opens in a new tab)

  14. d-Limonene, a Renewable Component for Polymer Synthesis

    … kinetics and estimate the monomer reactivity ratios, important parameters in the prediction of copolymer composition. Kinetic modeling of the BA/Lim copolymerization was performed with PREDICI simulation software. The model supports the presence of a significant degradative chain …

    ottawa-retro Repository record for d-Limonene, a Renewable Component for Polymer Synthesis (opens in a new tab)

  15. Estimation of Free Radical Polymerization Rate Coefficients using Computational Chemistry

    … relationship is applied to estimate reactivity ratios from the relative differences in ΔHr. The validity of this methodology is tested through a comparison of calculated monomer and radical reactivity ratios for acrylate, methacrylate, vinyl acetate, ethene and styrene systems to …

    queens Repository record for Estimation of Free Radical Polymerization Rate Coefficients using Computational Chemistry (opens in a new tab)

  16. Radical copolymerization chain-growth kinetics of sparingly water-soluble monomers in organic and aqueous solutions

    … in the aqueous phase, controlled by the system reactivity ratios that differ compared to those for chain growth in the particles. Although the emulsion copolymerization of methyl methacrylate (MMA) and butyl acrylate (BA) has been extensively investigated, their reactivity ratios and p values in …

    queens Repository record for Radical copolymerization chain-growth kinetics of sparingly water-soluble monomers in organic and aqueous solutions (opens in a new tab)

  17. Polymeric thin films by chemical vapor deposition for the microelectronics industry

    … This system also allows the calculation of reactivity ratios of PX with vinylic comonomers. A model is developed in which reactivity ratios can be determined if the following quantities are known: a) thickness vs. position of the final film; b) partial pressures of each reactive species …

    vt Repository record for Polymeric thin films by chemical vapor deposition for the microelectronics industry (opens in a new tab)

Page 1 of 5