Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 25 for “"Reactivity control"”.
-
Reactivity control of a PWR 19x19 uranium silicide fuel assembly
… necessitating a thorough investigation of reactivity control options. This thesis considers the design of both control rods and burnable absorbers on the basis of the I2S-LWR uranium silicide fuel assembly. Fuel assembly designs are considered with various control rod arrangements and …
-
Assessment and Optimization of the Canadian SCWR reactivity control systems through reactor physics and thermal-hydraulics coupling
… this concept. Moreover, the current design lacks reactivity control mechanisms to remove the initial excess reactivity and manage the core power distribution. Fuel-integrated burnable absorber and cruciform control rods were designed for the Canadian SCWR as part of this work. A new genetic …
-
Core Design Optimization and Steady State Criticality Analysis of the Canadian Nuclear Battery™
… use of burnable poison particles for long term reactivity control. This thesis reports the methodology used for 3D neutronics modeling and core design of the CNB using the Monte Carlo particle transport code SERPENT 2.1. Optimization of the fuel enrichment, amount of burnable poison, lattice …
-
Evaluating and Controlling for Reactivity Following Supervisor Training and Feedback
… feedback procedures with preschool teachers and reactivity that occurred in a preschool classroom due to a supervisors' presence. Preschool teachers' positive interactions following the implementation of a self-monitoring and feedback procedure only slightly increased without the presence of a …
-
MODELLING AND NEUTRONIC DESIGN OPTIMIZATION OF A HEAT PIPE COOLED MICRO NUCLEAR REACTOR
… code to evaluate neutron flux distributions, reactivity behaviour, fuel temperature coefficients, and depletion characteristics. Several design optimizations were implemented to achieve and sustain criticality despite the lower fissile content of TRISO fuel, such as pitch adjustment, cladding …
-
Simulation of Wire Activation Experiments of Pickering Reactor Unit Number 2 Part A: Industrial Project Bipolar Junction Phototransistor Modelling Part B: McMaster (On-Campus) Project
… of obtaining this knowledge is to compare, for controlled reactor conditions, the measured with the simulated neutron flux distributions. The results of the SORGHUM code, which is used for evaluating methods of controlling large power reactors during and after some prescribed perturbations, were …
-
Fuel Utilization Improvements in Heat Pipe Monoblock Microreactors
… concepts in economics and remote utility. Reactivity control is achieved using burnable absorbers, control sliders, and an emergency shutdown rod. It was found additional burnable absorber loading had a diminishing return on the cycle peak criticality while the penalty incurred to discharge …
-
Simplified core physics and fuel cycle cost model for preliminary evaluation of LSCR fueling options
… and the FLiBe coolant could not be utilized for reactivity control as a burnable absorber. The results found through this research provide reasonable guidelines for expected costs and narrow down the types of configurations that should be considered as fuel design options for the LSCR. …
-
Advanced online fuel reprocessing simulation for thorium-fueled molten salt breeder reactor
… impact on safety parameters (e.g., temperature reactivity feedback, reactivity control system worth). In the third application, the average Th-232 feed rate throughout 20 years of operation is 2.39 kg/day or 100 g/GWh(e) which is a good agreement with other recent research. Problematic effects …
-
Uncertainty evaluation of delayed neutron decay parameters
… neutrons play a critical role in sustaining a controllable chain reaction. Delayed neutron’s relative yields and decay constants are very important for modeling reactivity control and have been studied for decades. Researchers have tried different experimental and numerical methods to assess …
-
Enhancing Fuel Performance of Molten Salt Reactors Through Improved Thermophysical Property Data, High-Fidelity Simulation, and Advanced Control Strategies
… data, validated system models, and advanced control strategies to ensure safe and economically competitive operation. This dissertation, Enhancing Fuel Performance of Molten Salt Reactors Through Improved Thermophysical Property Data, High-Fidelity Simulation, and Advanced Control Strategies, …
-
Examination of Hypothetical Transportation Accidents for Transportable Nuclear Power Plants
… To observe the most conservative scenarios, reactivity control materials, such as control rods or drums and burnable poisons, were absent. These core rearrangement accidents were modeled in the continuous-energy Monte Carlo code Serpent and the point kinetics equations analyzed the resulting …
-
Modeling and validation of dosimetry measurement assumptions within the Armed Forces Radiobiology Research Institute TRIGA Mark F reactor and associated exposure facilities using Monte Carlo techniques
… from the reactor, to include total core excess reactivity, control rod worths, and nominal fuel element worths. The model was then used to model burnup within individual fuel elements within the core to determine the effect of core movement within the reactor pool on individual element burnup. …
-
Feasibility study of a small, thorium-based fission power system for space and terrestrial applications
… loading over the lifetime of the core. Reactor control is achieved through an innovative approach to the conventional boron carbide neutron absorber by utilizing sections of borated aluminum placed in rotating control drums within the reflector. Borated aluminum allows for much smaller boron …
-
Xenon Induced Power Oscillations in a Generic Small Modular Reactor
… Finally, a preliminary investigation into excess reactivity control options for the SMR design was conducted confirming the generally held notion that existing PWR control mechanisms can be used in iPWR SMRs with similar effectiveness. With the desire to operate the SMR under the boron free …
-
A Reduced Order Transient System Model for Low Enriched Uranium Nuclear Thermal Propulsion Engines
… operational maps that show the feasibility of control based on nozzle chamber conditions for a given user-inputted engine design. The information adopted in this thesis has been collected from publicly available sources. The results examine sensitivity studies to show the feasibility of an …
-
Numerical simulation of combustion and unburnt products in dual-fuel compression-ignition engines with multiple injection
… a high ignition temperature and relatively low reactivity, natural gas can enable promising approaches to combustion engine design. In particular, the combination of low reactivity natural gas and high reactivity diesel may allow for optimal operation as a reactivity-controlled compression …
-
Conceptual Design and Preliminary Safety Analysis of a Proposed Nuclear Microreactor for Mobile Application
… the axial and radial reflector components. Six control drums and four control rods ensure redundant reactivity control to satisfy the single failure criterion (SFC) and to provide defense-in-depth (DiD). The core has a lifetime of at least 10 years with enough excess reactivity. Full-core …
Page 1 of 2