Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Reactivity ratio"”.

  1. Reactivity ratio estimation: Two case studies.

    … These studies focused on the determination of reactivity ratios: important copolymerization kinetic parameters. They are used to predict multicomponent polymer composition directly and have an indirect influence on the prediction of polymerization rate and final properties. In some cases, these …

    ottawa-retro Repository record for Reactivity ratio estimation: Two case studies. (opens in a new tab)

  2. Evaluation of instantaneous and cumulative models for reactivity ratio estimation with multiresponse scenarios

    Estimating reactivity ratios in multicomponent polymerizations is becoming increasingly important. At the same time, using cumulative models is becoming imperative, as some multicomponent systems are inherently so fast that instantaneous "approximate" models can not be used. In the first part of …

    waterloo Repository record for Evaluation of instantaneous and cumulative models for reactivity ratio estimation with multiresponse scenarios (opens in a new tab)

  3. Reactivity Ratio Estimation Aspects in Multicomponent Polymerizations at Low and High Conversion Levels

    Estimation of reactivity ratios from cumulative copolymerization models eliminates the difficulties associated with stopping reactions at low conversion, while one gains to study the full polymerization trajectory. The parameter estimation technique used in this research is the …

    waterloo Repository record for Reactivity Ratio Estimation Aspects in Multicomponent Polymerizations at Low and High Conversion Levels (opens in a new tab)

  4. Reactivity ratio estimation in multicomponent polymerizations using the error-in-variables-model (EVM) framework

    … of monomers are expressed as monomers reactivity ratios. Predicting and controlling polymer composition from the knowledge of monomer concentrations and their reactivity ratios is crucial to research in this field and the polymerization industry due to the clear impact of polymer chain …

    waterloo Repository record for Reactivity ratio estimation in multicomponent polymerizations using the error-in-variables-model (EVM) framework (opens in a new tab)

  5. Investigation of Reactivity Ratios for the AMPS/AAm/AAc Terpolymer and Associated Copolymers

    … these optimally designed experiments, accurate reactivity ratio estimates were determined for AMPS/AAm, AMPS/AAc and AMPS/AAm/AAc. To better understand the error associated with each system, reactivity ratio point estimates for both the binary and ternary systems were presented using joint …

    waterloo Repository record for Investigation of Reactivity Ratios for the AMPS/AAm/AAc Terpolymer and Associated Copolymers (opens in a new tab)

  6. Nonlinear Parameter Estimation for Multiple Site-Type Polyolefin Catalysts Using an Integrated Microstructure Deconvolution Methodology

    … Model (IDEM). IDEM estimates ethylene/alf-olefin reactivity ratios for each site type in two-steps. In the first step, the copolymer MWD, measured by high-temperature gel permeation chromatography, is deconvoluted into several Flory’s most probable distributions to determine the number of site …

    waterloo Repository record for Nonlinear Parameter Estimation for Multiple Site-Type Polyolefin Catalysts Using an Integrated Microstructure Deconvolution Methodology (opens in a new tab)

  7. Mathematical Modeling of Chain Shuttling Polymerization

    … ethylene/-olefin block due to its high reactivity ratio towards α-olefin insertion, while the other catalyst makes a hard/semi-crystalline ethylene/-olefin block due to its low -olefin reactivity ratio. The soft block provides elastomeric properties, whereas the hard block works as a …

    waterloo Repository record for Mathematical Modeling of Chain Shuttling Polymerization (opens in a new tab)

  8. MECHANISTIC INSIGHTS INTO RELATIONSHIP BETWEEN NETWORK ARCHITECTURE, POLYMERIZATION KINETICS, AND MACROMOLECULAR PROPERTIES

    … macromolecular architecture, such as sol-gel ratio and crosslinking density. Hence, this dissertation focuses on the study of predicting and controlling macromolecular network architectures in both bulk polymerization and emulsion polymerization. Bulk polymerizations share some similar …

    unh-thes Repository record for MECHANISTIC INSIGHTS INTO RELATIONSHIP BETWEEN NETWORK ARCHITECTURE, POLYMERIZATION KINETICS, AND MACROMOLECULAR PROPERTIES (opens in a new tab)

  9. Synthesis and characteristics of polyarylene ether sulfones

    … second order kinetics. This deviation has been rationalized to be due to the heterogeneous nature of the reaction. The utility of these polymers is a direct function of their excellent stability (hydrolytic, thermal and dimensional) wide use range and good mechanical properties. However, their …

    vt Repository record for Synthesis and characteristics of polyarylene ether sulfones (opens in a new tab)

  10. Radical Polymerization of Bio-Renewable Butyrolactone Monomers

    … with molar composition and crosslinking content. Reactivity ratio of SHMeMB:AM at 50C and 15 wt% were estimated using low conversion data (rSHMeMB=0.12 and rAM=1.10), and the integrated Mayo-Lewis equation (rSHMeMB=0.17 and rAM=0.95). However, in-situ NMR results showed that SHMeMB:AM …

    queens Repository record for Radical Polymerization of Bio-Renewable Butyrolactone Monomers (opens in a new tab)

  11. d-Limonene, a Renewable Component for Polymer Synthesis

    … kinetics and estimate the monomer reactivity ratios, important parameters in the prediction of copolymer composition. Kinetic modeling of the BA/Lim copolymerization was performed with PREDICI simulation software. The model supports the presence of a significant degradative chain …

    ottawa-retro Repository record for d-Limonene, a Renewable Component for Polymer Synthesis (opens in a new tab)

  12. Free Radical Polymerization of N-Vinylformamide and Novel Comb-structure Polyelectrolytes

    … solution polymerization when the monomer concentration was over 40wt% (5.63 moI/L). A semi-empirical model based on the free volume theory was proposed to describe both the bulk and solution polymerizations. It was also confirmed that amide group provided crosslinking points that formed PNVF gel …

    mcmaster Repository record for Free Radical Polymerization of N-Vinylformamide and Novel Comb-structure Polyelectrolytes (opens in a new tab)

  13. Poly(amino acid) as a targeting drug delivery carrier

    … as a targeting drug delivery carrier. The reactivity ratio of each monomer was determined by using Fineman-Ross, Kelen-Tüdös, and nonlinear least-squares curve fitting methods. The product of the estimated reactivity ratios from the monomers in the binary copolymerizations indicated that …

    u-pacific Repository record for Poly(amino acid) as a targeting drug delivery carrier (opens in a new tab)

  14. Synthesis, Polymerization Kinetics, and Applications of Novel Macromonomer-Based Degradable Materials

    … (ROP) in which the type and stoichiometric ratio of cyclic monomer to initiator controls the final comb-polymer degradability. In this work, several ROP initiators are implemented to produce four new methacrylate macromonomer families with different end-group functionalities (alkyl, tertiary …

    queens Repository record for Synthesis, Polymerization Kinetics, and Applications of Novel Macromonomer-Based Degradable Materials (opens in a new tab)

  15. Radical Copolymerization of Hydroxy-Functional Monomers

    … of solvent type on the copolymerization reactivity ratios and composition-averaged propagation rate coefficients. In the second part of the study, small scale semi-batch reactions were conducted to investigate the influence of temperature, monomer composition and initiator content on the …

    queens Repository record for Radical Copolymerization of Hydroxy-Functional Monomers (opens in a new tab)

  16. Kinetics and Modeling of Radical Copolymerization of Water-Soluble Cationic Monomers

    Polyelectrolytes (PELs) are a special class of charged water-soluble polymers utilized in both consumer and industrial applications such as pharmaceuticals, cosmetics, waste-water treatment, flocculating agents, oil drilling and enhanced oil recovery. While their unique solution properties are …

    queens Repository record for Kinetics and Modeling of Radical Copolymerization of Water-Soluble Cationic Monomers (opens in a new tab)

  17. Biologically inspired glass/polyepoxide interphase with improved mechanical properties

    … kinetics in batch. In addition, the reactivity ratios were estimated by using a LSNF as well as KTM and EKTM, giving reactivity ratios for both monomers close to one. According to these investigations, the batch copolymerization of THP-HEMA/TESPMA yields exclusively ideal random …

    fu-berlin Repository record for Biologically inspired glass/polyepoxide interphase with improved mechanical properties (opens in a new tab)

  18. Design of Polymeric Materials: Novel Functionalized Polymers for Enhanced Oil Recovery & Gas Sorption Applications

    … temperatures, high shear rates, and high concentrations of salt in the reservoir. The shortcomings of HPAM include poor thermal stability, poor shear stability, and poor brine compatibility. As a result, HPAM can degrade during EOR, thus lowering molecular weight averages and reducing oil …

    waterloo Repository record for Design of Polymeric Materials: Novel Functionalized Polymers for Enhanced Oil Recovery & Gas Sorption Applications (opens in a new tab)