Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"Reaming"”.

  1. Development of a directional bone reaming system.

    … for the treatment of fractures usually involves reaming with a series of central cutters driven by a drill-like device with a flexible shaft over a guide wire. The reamers sequentially enlarge the intramedullary canal into a tunnel of circular cross-section and a diameter appropriate for the …

    louisville Repository record for Development of a directional bone reaming system. (opens in a new tab)

  2. An experimental and theoretical investigation of the reaming operation

    … area is very limited. An initial survey of the reaming process indicated that there was very limited work carried out in reaming. Therefore 2 avenues were investigated to improve the understanding of the reaming process--an experimental program to understand the reaming process and a theoretical …

    unsw Repository record for An experimental and theoretical investigation of the reaming operation (opens in a new tab)

  3. An analysis of the effectiveness of reaming as a secondary operation for hole production

    … variables. The secondary operation of reaming was also investigated to determine the increase in surface finish and accuracy versus the amount of machining time required to perform the reaming operation. In this study 1728 holes were drilled and an additional 1728 holes were pre-drilled …

    ttu Repository record for An analysis of the effectiveness of reaming as a secondary operation for hole production (opens in a new tab)

  4. Optimisation of the aluminium compressor impeller machining process

    … against WC when blind-hole drilling C355 and reaming 6082-T6 aluminium alloys. Benefits in terms of extended tool life and reduced material adhesion/BUE were observed when drilling and reaming using the commercial Graphit-iC™ coating. The performance of CVD diamond coated and PCD tools were …

    birmingham Download PDF for Optimisation of the aluminium compressor impeller machining process (opens in a new tab)

  5. Early local microcirculation is improved after intramedullary nailing in comparison to external fixation in a porcine model with a femur fracture

    … circulatory changes induced by intramedullary reaming are not fully understood. This study aimed to analyse the short-term local microcirculation associated with different surgical strategies in a porcine model with a mid-shaft fracture. METHODS German landrace pigs were subjected to a …

    zurich Restricted access

  6. A Practical On-Machine Tool Condition Monitoring Approach to Predicting Reamer Tool Life

    … and the cutting principles underlying the reaming process. This analysis aids in investigating the relationship between the geometric changes in reamers resulting from wear and the occurrence of reamer failure. Additionally, the research extensively explores the main forms of reamer wear …

    concordia Download PDF for A Practical On-Machine Tool Condition Monitoring Approach to Predicting Reamer Tool Life (opens in a new tab)

  7. An Assessment Of The Foundational Validity Of Firearms Identification Using Ten Consecutively Button Rifled Barrels

    … characteristics and the survivability of reaming marks, • The error rate for bullet comparisons using ten consecutively manufactured barrels, • The effect of damage to bullets on the error rate, • Reproducibility of bullet comparisons among different examiners. It has long been assumed …

    uab Repository record for An Assessment Of The Foundational Validity Of Firearms Identification Using Ten Consecutively Button Rifled Barrels (opens in a new tab)

  8. Tensile and fatigue behavior of punched structural steel plates

    … required to be formed by full-size drilling or reaming following punching. In addition to literature review and analysis of previous research on the behavior and strength of connections with variables such as hole preparation, 120 plate specimens with punched, reamed, or drilled holes were …

    texas Repository record for Tensile and fatigue behavior of punched structural steel plates (opens in a new tab) Restricted access

  9. Machining process changes as a function of surface roughness, specific to machining cylindrical bores

    … process that analysis was based involved finish reaming twelve roller follower bores utilizing six controlled and six experimental finish reamers. Forty one parts were randomly selected during a three thousand piece production run. Parts were cleaned and moved to a special investigative lab. A …

    northern-iowa Repository record for Machining process changes as a function of surface roughness, specific to machining cylindrical bores (opens in a new tab)

  10. Charakterisierung der zellulären Signatur und Zusammensetzung von Knochenmarks-MSC aus osteoarthrotischen Hüften

    … Hüften genauer zu charakterisieren, wurde hier Reaming aus dem Acetabulum (ein bei der Hüft-TEP Implantation anfallendes chirurgisches Abfallprodukt) untersucht. Die enthaltenen Zellen wurden im Hinblick auf die zelluläre Signatur und donorenbezogenen Eigenschaften untersucht. Parameter, die …

    wurz-thes Repository record for Charakterisierung der zellulären Signatur und Zusammensetzung von Knochenmarks-MSC aus osteoarthrotischen Hüften (opens in a new tab)

  11. Machine learning and interactive real-time simulation for training on relevant total hip replacement skills.

    … to ensure successful outcomes. Acetabular reaming is the step during which the acetabulum is resurfaced and prepared to receive the acetabular implant. The success of this step is directly related to the success of fitting the acetabular component. Therefore, this thesis will focus on …

    bournemouth Download PDF for Machine learning and interactive real-time simulation for training on relevant total hip replacement skills. (opens in a new tab)

  12. Clinical and laboratory studies of mesenchymal stem cells in long bone fracture nonunion

    … (LL) samples from nonunion patients undergoing reaming with reamer irrigation aspiration (RIA) (n=12) and other non-reaming procedures (NR, n=12) with control groups including UL from early rheumatoid arthritis (RA, n=11) and healthy controls (n=12). CFU-F assay results revealed the presence of …

    whiterose Download PDF for Clinical and laboratory studies of mesenchymal stem cells in long bone fracture nonunion (opens in a new tab)

  13. An investigation of the management of implementation of integrated quality management system (IQMS) in the Department of Education : a case of Mafikeng Area Project Office in the North West Province

    … system (IQMS) in order to improve quality of reaming and teaching. This research focused on the effects of performance measurement in IQMS on educators' performance, its contribution to developmental purpose and pay progression and its effects on the improvement of education. Stratified random …

    nwu-za Repository record for An investigation of the management of implementation of integrated quality management system (IQMS) in the Department of Education : a case of Mafikeng Area Project Office in the North West Province (opens in a new tab)

  14. Investigation of soil-structure interaction for low-carbon design of open caisson shafts

    … 2D, using adaptive remeshing, evaluates under-reaming in sands as an alternative uplift resistance strategy. <br><br>The EC analysis of MT provides insights into five areas: (1) the contribution of materials and construction phases to EC; (2) the sensitivity of EC to steel production methods; …

    oxford Repository record for Investigation of soil-structure interaction for low-carbon design of open caisson shafts (opens in a new tab)

  15. Vibration of the femur during total hip arthroplasty and the application of a dynamic vibration absorber

    The problem of femoral vibration during the reaming process in total hip arthroplasty is examined. These vibrations are modeled as the transverse vibration of a free-simple Euler-Bernoulli beam using a transfer matrix method which allows the calculation of the frequency response of the beam. This …

    rice Repository record for Vibration of the femur during total hip arthroplasty and the application of a dynamic vibration absorber (opens in a new tab)

  16. Selected Problems of Machine Tool Chatter

    … solve the problem of pseudostatic instability in reaming tapered holes.</p>

    mcmaster Repository record for Selected Problems of Machine Tool Chatter (opens in a new tab)

  17. Real Time Torque and Drag Analysis during Directional Drilling

    … operations such as drilling, tripping in/out and reaming/back reaming.

    calgary Repository record for Real Time Torque and Drag Analysis during Directional Drilling (opens in a new tab)

  18. Overview of horizontal directional drilling for utility construction

    … The construction process (pilot hole, reaming and pullback) along with the major components (drill rig, drill pipe, slurry, slurry recycling, survey equipment, drill bits, reamers and pipeline materials) will be discussed. The advantages of cost reduction, and environmental, social and …

    nps Repository record for Overview of horizontal directional drilling for utility construction (opens in a new tab)

  19. Evaluation of large acetabular bone defects

    … geometry was simplified. For this purpose, nine reaming procedures with hemispherical reamers were defined in order to reproduce the defect with its main characteristics. From the resulting “complete defect” (defect increment 4), three additional, less severe bone defect increments were derived …

    lmu-germany Repository record for Evaluation of large acetabular bone defects (opens in a new tab)

  20. Design and Evaluation of Novel Devices to Facilitate Long Bone Fracture Reconstruction

    … and distal fragments to enable subsequent IM reaming and nail insertion. Despite widespread usage of IM nailing, significant surgical challenges arise in accurate entry point selection and obtaining adequate provisional reduction to allow conventional intramedullary guide wire insertion. Such …

    toronto-retro Repository record for Design and Evaluation of Novel Devices to Facilitate Long Bone Fracture Reconstruction (opens in a new tab)

Page 1 of 3