Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"Rectangular Section"”.
-
Elasto-plastic stress analysis of curved structures with rectangular section
… stress distribution and the deflection at any section of the structure between the load causing first yielding and the collapse load is still an unsolved problem. Concerning the problem of evolution of the stress distribution in the inelastic range, most literature relies on the simple plastic …
-
Slamming motions of a rectangular-section barge model in harmonic waves
… theoretical analysis of the motion of floating rectangular cross-section bodies in single-frequency harmonic waves. When a conventional laterally symmetric ship is modelled by such a body, the computation of strip-theory coefficients (derived from the solution of Laplace's equation for the fluid …
-
Effects of turbulence scale on the correlation of pressures on rectangular section prisms
… on and between the windward and leeward faces of rectangular section prisms was conducted in the 3m x 1.5m industrial aerodynamics wind tunnel. To isolate the effects of turbulence scale the velocity profile of the atmospheric boundary layer was not modelled. Turbulence was generate dusing …
-
Thermo-Elasto-Plastic Stability of Biaxially Loaded Hollow Rectangular Section Steel Beam-Columns with Applied Torsion
… and theoretical study of biaxially loaded hollow rectangular section steel beam-columns with applied torsion at elevated temperatures. The theoretical analysis is based on a system of simultaneous materially nonlinear differential equations of equilibrium for which an iterative semi-analytic …
-
SOME CONTRIBUTIONS TO THE STUDY OF SCOUR IN LONG CONTRACTIONS (EQUIVALENT, SECTION, SEDIMENTATION).
… to determine a procedure to find an equivalent rectangular section which would convey the same water discharge and sediment load at same slope as an irregular, natural channel in order to simplify numerical computations of scour depth and to allow appropriate application of long contraction …
-
Subcritical Flow Computation in an Open-Channel Network with Dividing Junctions and Sluice Gates
… and a sluice gate of a trapezoidal cross section are derived. The flow rates and corresponding water depths in each branch channel for various cases of given discharges in the upstream main channel and the geometric features of the main channel and the branch channels are computed. The …
-
Effects of turbulence on wind induced vibrations of bluff cylinders
… Turbulence was produced by grids of bars of rectangular section and the measurements of its properties, with hot wires, gave results in good agreement with those of other experimenters. Then, dynamic and static models of rectangular section with H/d=0.5, 1.0, 2.0 and of D-shape, were exposed …
-
Statistical variation of reinforced concrete structure strength.
… beam and 20 columns. The simple beams were of rectangular section 5" wide by 8" deep with 2-#5 bars as tension reinforcement only. The simple beams were loaded to failure using equal loads at the third points. The two-span continuous beams, also of rectangular section 5" x 8" had both tension …
-
Wind Energy extraction using flutter mechanism of rigid sections
… energy harvester that uses rigid-body motions of section models to harvest wind energy at low wind speeds. Section models are rigid-models with 1-3 degree-of-freedom (DOF) that faithfully represent the geometry of the cross-section of a structure over a finite length, with end plates to simulate a …
-
Development of a boundary layer control device for tip clearence experiments in an axial compressor
… the atmospheric boundary layer in large rectangular section wind tunnels. A significantly thicker boundary layer was measured in the compressor than was intended. However, the results were interpreted and recommendations were made for geometry changes necessary to achieve the intended …
-
Parametric study of stiffened steel containment shell structures
… facilities. The stiffeners are flat strips of rectangular section welded on to the outer surface of the shell, either over the whole length of the shell meridian or around the circumference of the shell. It is required to establish how the elastic buckling load and mode shapes vary with respect …
-
Dimensionamento prático à força cortante de seções de concreto armado
… may be determined through an equivalent concrete section. The equivalent section method could be applied torectangular cross-section linear members with a vertical symetry axis. The application of this method could be extended to members with other cross-sectional shapes, provided that no sharp …
-
Indirect measurement of local condensing heat-transfer coefficient around horizontal finned tubes
… condensation of steam on three finned tubes with rectangular-section fins. These tubes have a fin thickness and fin height of 1.0 mm and fin spacings of 0.5, 1.0 and 1.5 mm. Data were taken by insulating both the inner and outer surfaces over up to 5 or 6 angular portions, including 0, 30, 60, 90, …
-
Numerical and physical modelling of dam-break flood waves in X-T and R-T space
… shock equations. Three numerical models for rectangular section channels are studied, namely the parallel (X-T), the expanded (R-T) and the contracted (R-T) cases; any two of these are then linked to produce three further models, described as the Contracted-Plain (RT-XT), the …
-
Modelling Of Sound Attenuation By Periodic, Rectangular Structures
… nuisance frequencies. Such structures possessing rectangular section are of particular interest due to the relative ease with which they can be implemented. While significant data is available, it has traditionally been a time consuming task to model and simulate such structures due to the need to …
-
Investigation of wear of materials by laser speckle photography
… are those which occur on the "side" of a rectangular-section pin which is in sliding contact against a counterface disc. The "side" of the pin is illuminated by a pulsed ruby laser beam, and a double exposure specklegram is made to obtain deformations which occur between laser pulses. So, …
-
Comportamento do esforço cortante à fadiga em vigas de concreto armado
… concrete beams with a length of 3.50 m and a rectangular section of 15 x 35 cm, divided into four groups, one of them with beams without transverse reinforcement. The applied load was constant and the smaller load was 10% of the last load resistant. The parameters varied in the experimental …
-
Design and manufacturing of composite structures using the resin transfer molding technique
… mold shapes such as a quasi-2D panel, a 3-D rectangular section and a 3-D semicircular section. To characterize the flow through the molds a commercial CFD software has been used. This thesis describes the establishment of this laboratory and preliminary studies that have been conducted.
-
Determing the Effect of Thermal Treatment Timing on Ultra-High Performance Concrete Beams
… and hence deflections. Three UHPC beams, a rectangular section, a modified bulb tee section, and a pi-girder, were assessed for losses and deflections using an incremental time step approach and material models specific to UHPC based on compressive creep and shrinkage testing. Results show …
-
Low heat high performance concrete for glass fiber reinforced polymer reinforcement
… over 70 MPa at 28 days for LHHPC. Eight beams of rectangular section were cast and tested to study the behaviour of the reinforced LHHPC. The results indicate a higher strength and ductility for LHHPC than the control normal conventional concrete (NCC) beams. The results from the air-entrained …
Page 1 of 2