Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 71 for “"Red Mud"”.
-
Geotechnical characterization of bauxite residue (red mud)
… ferruginous residue slurry (bauxite residue or red mud). This leaching process produces alumina to ferruginous/bauxite residue at ratios of 1:1 to 1:4 with the end result being billions of tons of bauxite residue waste (4 billion tons worldwide by this year (2015)). The residue is associated …
-
New Horizons for Processing and Utilizing Red Mud
Red mud is an industrial slurry waste that is produced as a byproduct of the Bayer process for alumina. The waste is generated in large quantities, up to a ratio of 2:1 against the valued product alumina. Red mud exhibits many chemical and physical properties that categorize it as a hazardous …
-
Effects of Operating Variables of Red Mud Deep Thickening
<p>The effects of operating variables of red mud deep thickening have been examined. The independent (operating) variables studied were 1) The dosage of an anionic polymeric flocculant and 2) the solids throughput. The dependent variables were the concentration of underflow solids, underflow …
-
Novel materials prepared from red mud for remediation of environmental pollutants
Red mud is a solid waste derived from bauxite refining processes, chiefly the Bayer process which dissolves alumina using alkaline solutions. Its disposal poses a significant environmental problem due to its high alkalinity, salinity, fine particle size and especially the large amount generated. …
-
Extraction and recovery of valuable elements from Red Mud through biohydrometallurgy
… produced through the Bayer process is called Red Mud (RM). RM might be environmentally dangerous due to its high alkalinity (the pH in fact ranges between 10 and 12.5) and the presence of toxic elements. Nevertheless, the contemporary approach to waste streams could turn this aspect into an …
-
Structure and development of fly ash and red mud-based geopolymers
… research also addresses the possibility of using red mud as an activator and a filler for fly ash-based geopolymers. The effect of activators such as Ca(OH)2, waterglass and NaOH on fly ash and red mud-based geopolymers were investigated. The micro-structure of such geopolymers was examined using …
-
Red mud as an iron-based catalyst for catalytic cracking of naphthalene
Reducing the tar content in the producer gas of biomass gasification processes remains one of the main challenges in the commercialization of this technology and, hence, the development of clean and economical tar-removing technologies is becoming increasingly important. Catalytic tar removal has …
-
Investigation into the extraction of value added products from red mud, An
Includes bibliographical references (pages 82-85).
-
Low-temperature gas-phase carbidization of iron-bearing constituents in red mud
Includes bibliographical references (pages 120-126).
-
Red mud minimisation and management for the alumina industry by the carbonation method
Bauxite residue (red mud), a waste from the Bayer process for refining bauxite to alumina, is highly alkaline (pH~13) and its treatment and management have posed environmental challenges to the alumina industry. Carbonation of red mud using carbon dioxide (CO₂) has previously been demonstrated to …
-
Recovery of value-added products from red mud and foundry bag-house dust
… not conserve it with holistic best practices and reduce societal costs. Resource is for the transformation of people and society."1 Red mud is a worldwide problem with reserves in the hundreds of millions of tons and tens of millions of tons being added annually. Currently there is not an …
-
Valorization of Red Mud and Marine Dredged Sediments in LC3: Methodology and Application
… investigates the integrated valorization of red mud (RM) and marine clayey dredged sediments (CDS) as alternative aluminosilicate sources in LC3 systems. It also evaluates their performance in non-structural applications (i.e. masonry units). Results show that thermal activation at 800 °C for …
-
Chemical Looping Combustion with an Industrial Waste: Kinetic Modeling and Pilot-Scale Design using Red Mud
… combustion reaction into distinct oxidation and reduction subreactions such that the fuel and air atmospheres remain separate. CLC has yet to be implemented at industrial scale; hence, there is interest in further developing this emerging technology. One such area of development is the OC …
-
Investigation of carbon-based reductant, low-temperature process for conversion of hematite in red-mud to magnetite
… in this Thesis was confined to a specific red-mud originating from Jamaican bauxite with an iron-content, reported as Fe2O3, of ~60 m%. In principle, separation (selective recovery) of this iron from the red-mud would yield a residual product in which the minor (‘high-value’) Al- and …
-
Synergistic Co-processing of Red Mud mining waste and alkaline Black Liquor from the Pulp and Paper Industry
… study of synergistically co-processing Red Mud and Black Liquor under varying temperatures, pressures, reaction times, and material ratios. The goal being to generate a treated Red Mud with a substantially lower pH and increased carbon content that would be more environmentally tolerable …
-
Investigation into the pyrometallurgical and electrometallurgical extraction of iron from "red mud" generated in the processing of bauxite ores, An
Includes bibliographical references (pages 136-142).
-
LC3-type multicomponent Portland Cement binders incorporating calcined clays, red mud, and ornamental stone waste: rheological, mechanical, and eco-efficiency performance
… Cement) incorporating industrial residues to reduce environmental impacts and adjust the rheological behavior of the binder to resemble conventional Portland cement, enabling potential commercial application. Three conventional clays from Ijaci, Brazil (IC – Ijaci Clay), as well as red mud …
-
Exploring the potential of red mud and naturally occurring materials for water treatment: sustainable strategies for the effective removal of antibiotics
… One of these industrial waste materials is red mud, which is the main byproduct of the aluminium production industry whether using the Bayer or sintering processes. Red mud causes many environmental issues including water and soil pollution because of its high alkalinity. In addition, dry …
-
Biogeochemical processes and trace element mobility in alkaline waste affected soils
… processing residue, into the wider environment. Red mud is a highly alkaline waste product from bauxite ore processing. It contains elevated concentrations of oxyanion forming elements such as Al, As, V and Mo that are mobilised at high pH together with other trace metals including Cu and Ni. The …
Page 1 of 4