Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 68 for “"Reduced Order Modelling"”.
-
REDUCED ORDER MODELLING OF SOFT ROBOTS
… framework SOFA. Experiments show that both the reduced order method and ABAQUS have approximately 10% error relative to experimentally measured displacements, as well as to each other. And the reduced order method outperforms SOFA when the deformation is highly nonlinear.
-
Reduced-order modelling of nonlinear dynamic structures
… the design and optimisation of structures. Reduced-order modelling methods aim to ease this bottleneck, by constructing low-dimensional models which are able to capture the salient dynamics of the full-order model in a much more efficient manner.<br/>The aim of this thesis is to further the …
-
Reduced order modelling in multimachine power systems
… is a fundamental step in obtaining reduced order dynamic equivalent models for power systems. Two methods of coherency identification are presented in this dissertation, one based on a slow coherency approach and the other based on modal analysis. Improvements in the slow coherency …
-
Reduced-Order Modelling of Vibroacoustic Admittance in Membrane Absorbers
… is prohibitively costly.In this dissertation, a Reduced Order Modeling (ROM) approach is applied to membrane absorber modeling, with the resulting ROM used to express the absorber’s boundary admittance matrix. The admittance matrix form is useful, since it can separate the coupled vibroacoustic …
-
Reduced order modelling of optimized transonic compressor rotor blades
… transonic rotor speeds and high stage loading in order to maintain the desired pressure ratio. From an aerodynamic perspective, this poses a challenge since it will be more difficult to design a compressor with respect to high efficiency. Finding a faster design for transonic compressor rotor …
-
Symmetry-Reduction for Reduced Order Modelling of Fluid Flows
… for discrete cyclic symmetry groups of arbitrary order, enabling symmetry reduction in a broad range of systems. For continuous symmetries, we use first Fourier mode slices. In a third approach, we introduce a continuous symmetry reduction technique based on the method of slices, where PCA modes …
-
Reduced-order modelling of electrohydrodynamic flows on a circular cylinder
This thesis concerns the theoretical modelling and analysis of a two-dimensional film of a perfectly conducting Newtonian liquid coating a uniformly rotating horizontal cylindrical electrode. The system is enclosed by a concentric outer electrode, with the electric potential difference between the …
-
Reduced-order modelling of thin-film flow over a spinning disk
This thesis examines the mathematical modelling and analysis of a thin-film flow of Newtonian liquid over a topographically-patterned disk rotating with constant angular velocity. A novel reduced-order model is derived using the weighted residual integral boundary-layer method, which includes the …
-
Reduced-order modelling of fluid flows using analytical and numerical methods
… weighted-residual model in the linear regime in order to elucidate the mechanics that determine both the stability and the axisymmetry of the flow. We demonstrate that these results in the linear regime, in general, correctly predict the results of the linear calculations of the Navier–Stokes …
-
Reduced-order modelling of active distribution networks for large-disturbance simulations
… First, this thesis deals with the derivation of reduced-order, “grey-box” models of ADNs, intended for dynamic simulations of the transmission system. The ADNs are assumed to host IBGs as well as static and motor loads, whose dynamic parameters are affected by uncertainty. This latter issue is …
-
PARAMETRIC REDUCED ORDER MODELLING OF LARGE-SCALE AEROELASTIC SYSTEM AND RAREFIED FLOW SYSTEM
… time-consuming. In this thesis, we will develop Reduced Order Model (ROM) and Parametric Reduced Order Model (PROM) of aeroelastic system and rarefied flow system. The resulting ROM&PROM can reduce the scale of the systems to 10e2~10e3, while maintaining a very high accuracy. Therefore, the …
-
Reduced order modelling and controller design for boundary element discretised flow around cylinders
<p>The objectives of this thesis are to (i) investigate and further validate the Viscous Cell Boundary Element Method for more complex fluid mechanics problems and moving bodies and (ii) to use fundamental ideas of image processing and spectral methods to investigate the ability to inverse model …
-
Application of Non-intrusive Reduced Order Modelling on Reservoir Simulation Using Radial Basis Function
… of a new data-based method of Non-Intrusive Reduced Order Modeling (NIROM) which can be applied on commercial reservoir simulators and discuss the performance of the NIROM method on reducing the computational running time within an acceptable compromise in accuracy. NIROM methods are usually …
-
Reduced Order Modelling of Turbulent Flows in the Framework of Variational Multi-Scale Method
This dissertation explores high-fidelity and reduced order modeling (ROM) methods for simulating turbulent flows, with applications in aerospace and environmental fluid dynamics. The study uses the variational multiscale (VMS) method throughout both full and reduced order models. The first part …
-
Vortex shedding analysis and control using reduced order modelling and viscous cell boundary element method
… <p>A brief overview is presented describing reduced order modelling techniques applicable to Navier-Stokes equations with particular focus on the proper orthogonal decomposition technique and its application to rotating cylinders. A control function h is formulated for this class of problems …
Page 1 of 4