Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 100 for “"Refractory materials"”.

  1. Characterization of Porous Media and Refractory Materials

    … of the fundamental properties of the refractory materials used in The Lost Foam Casting process. In this study, new techniques are proposed to characterize the refractory materials’ properties such as particle size, particle shape, rheological behavior, transport properties, …

    utk-theses Repository record for Characterization of Porous Media and Refractory Materials (opens in a new tab)

  2. Thermophysical properties of refractory materials in copper smelting

    … the vessels that pose the greatest challenges in refractory wear. Understanding and reducing refractory wear is important for reasons of safety, on-line availability and smelting cost. In this work, the thermal conductivity of end-of-life refractory bricks from two industrial smelters and …

    aalto Repository record for Thermophysical properties of refractory materials in copper smelting (opens in a new tab)

  3. Modeling of thermal stress cycling in refractory materials

    … It is suggested that ‘thermally induced refractory cracking’ is often the primary cause of in-service refractory failure but quantitative support for this is lacking. The current work is focussed on studying this aspect by developing an experimentally validated thermomechanical model that …

    ubc Repository record for Modeling of thermal stress cycling in refractory materials (opens in a new tab) Download PDF for Modeling of thermal stress cycling in refractory materials (opens in a new tab)

  4. Processing and properties of bulk and cellular carbon-bonded refractory materials

    … distinct problems concerning carbon-bonded materials processing and characterization were analyzed, from bulk to cellular samples. The main motivation was to address central topics that would enhance the comprehension of the material’s behavior, as well as trigger targeted improvements. Some …

    qucosa-diss

  5. Revealing Refractory Materials on Trans-Neptunian Objects and Centaurs via Reflectance Spectroscopy

    … investigated to determine whether silicates and refractory organics, which are predicted to be present on their surfaces, could be directly detected via the presence of their characteristic absorption bands. Most of the objects observed exhibit reflectance spectra typical of TNOs, without …

    qu-belfast Repository record for Revealing Refractory Materials on Trans-Neptunian Objects and Centaurs via Reflectance Spectroscopy (opens in a new tab) Download PDF for Revealing Refractory Materials on Trans-Neptunian Objects and Centaurs via Reflectance Spectroscopy (opens in a new tab)

  6. Thermodynamics and Reaction Kinetics During Mechanochemical Synthesis and Environmental Testing of Lanthanide and Actinide Refractory Materials

    … is a broad family of well-known techniques for materials processing that includes mechanochemical synthesis, in which the milled materials react during milling. The latter may involve components reacting in the solid, liquid, or gas phases, and the operative kinetics have hardly been studied. …

    boise Repository record for Thermodynamics and Reaction Kinetics During Mechanochemical Synthesis and Environmental Testing of Lanthanide and Actinide Refractory Materials (opens in a new tab)

  7. Evaluation of the theta pinch as a sampling and excitation source for elemental analysis of solid refractory materials

    … and excitation source for elemental analysis of refractory solids. Previous work demonstrated the ability of the discharge to produce spectra suitable for qualitative analysis, but quantitation could not be demonstrated due to insufficient and irreproducible sampling. It was deemed necessary to …

    uiuc Repository record for Evaluation of the theta pinch as a sampling and excitation source for elemental analysis of solid refractory materials (opens in a new tab)

  8. Reciprocal influence between MgO-C refractory materials with different MgO grade and a steel melt and the resulting effect on non-metallic inclusions

    … amount of dissolved oxygen. A lower MgO grade refractory specimen in contact with the steel melt resulted in a higher proportion of low melting phases on its surface compared to a higher MgO grade specimen. These low-melting phases promoted the formation of MnSi-based inclusions and triggered …

    qucosa-diss

  9. Finite element simulation of creep behavior in enhanced refractory material for glass furnace

    … partial pressure that hasten the corrosion of refractory materials, particularly in silica refractories. Thus, the refractories used in the oxy-fuel-fired furnace are subjected to high temperatures and stresses during its service life. Considerable creep could occur in the furnace, if the …

    wvu Repository record for Finite element simulation of creep behavior in enhanced refractory material for glass furnace (opens in a new tab)

  10. Inorganic Phase Characterization, Corrosion Modelling and Refractory Selection for Direct Contact Steam Generation

    … (SAGD), and (2) mining, in order to inform refractory material selection for the combustor. For SAGD, free water knockout tank discharge was used as the process water and resulting deposits in the combustor were predicted to be high in silica and sodium oxide, and enriched with sodium …

    ottawa-retro Repository record for Inorganic Phase Characterization, Corrosion Modelling and Refractory Selection for Direct Contact Steam Generation (opens in a new tab)

  11. ICP Analysis of Solids/Waste Slurries

    … trace elements in coal, coal ash, cements, and refractory materials. In this study aqueous slurries of 6 coals were prepared by milling with a stirred-ball slurry attritor mill and an air impact pulverizer. ICP analysis values obtained for the six coals by the two different grinding methods were …

    wku-diss Repository record for ICP Analysis of Solids/Waste Slurries (opens in a new tab)

  12. Mechanisms, Microstructures, and Mechanical Behavior in Cold Spray Refractory Metals

    … and laser heated cold spray (LHCS) for the refractory materials tantalum and niobium. Refractory metals possess many desirable material properties, such as high melting temperatures (generally over 2,000℃) and excellent wear resistance. Traditional melt-based additive manufacturing (AM) …

    alabama Repository record for Mechanisms, Microstructures, and Mechanical Behavior in Cold Spray Refractory Metals (opens in a new tab)

  13. Estudo do aproveitamento do rejeito da mineração de esmeraldas na produção de refratários conformados isolantes

    … The production of isolating, transformed refractory materials achieves the sustainability dimension when protection of the environment is incorporated to such process. This work investigates the use of emerald mining rejects in the ceramic body of refractory materials, aiming at obtaining …

    brazil-ufrn Repository record for Estudo do aproveitamento do rejeito da mineração de esmeraldas na produção de refratários conformados isolantes (opens in a new tab)

  14. Experimental studies and thermodynamic modeling of metal-slag-refractory interactions in non-ferrous pyrometallurgical processes

    … slag phases exhibit complex behavior. Moreover, refractory lining materials generally react with the liquid phases, such as slag phases under extreme conditions at high temperatures in the Cu/Ni smelting and converting furnaces. Therefore, various solid and liquid solutions can be formed, and the …

    aalto Repository record for Experimental studies and thermodynamic modeling of metal-slag-refractory interactions in non-ferrous pyrometallurgical processes (opens in a new tab)

  15. Optimizing a Method for the Direct Determination of Rare Earth Elements in Refractory Geological Materials Using Electrothermal Vaporization Coupled to Inductively Coupled Plasma Optical Emission Spectrometry

    … Their determination is made challenging by the refractory ores in which they typically exist. Traditional analysis methods require aqueous samples; however, preparing aqueous solutions from refractory materials is difficult, time-consuming, and costly. For this reason, a direct solid sample …

    queens Repository record for Optimizing a Method for the Direct Determination of Rare Earth Elements in Refractory Geological Materials Using Electrothermal Vaporization Coupled to Inductively Coupled Plasma Optical Emission Spectrometry (opens in a new tab)

  16. Ceramic coatings for silica and sapphire optical waveguides for high temperature embedding and sensing

    … in harsh environments, other appropriate coating materials have to be used. This thesis examines various refractory materials as candidate coating materials. Coating materials should not react chemically with the waveguide material but should have matching thermal expansion coefficients. …

    vt Repository record for Ceramic coatings for silica and sapphire optical waveguides for high temperature embedding and sensing (opens in a new tab)

  17. Plasma Spectrochemical Analysis Of Slurries

    The analysis of ores, minerals and refractory materials by slurry atomisation has been investigated using inductively coupled plasma and direct current plasma-atomic emission spectrometry (ICP-AES, DCP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS). Aqueous calibrants were used. …

    plymouth Repository record for Plasma Spectrochemical Analysis Of Slurries (opens in a new tab)

Page 1 of 5