Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"Regenerative Amplifier"”.
-
Pseudo pipelined SAR ADC with regenerative amplifier
… options we have in implementing the residue amplifier in a two stage pipelined ADC. A linear op-amp is traditionally used to implement the residue amplifier. Integrators have been used for this purpose as well. This design takes it one step further and explores the feasibility of using …
-
Simulations of the LANL 1 KW regenerative amplifier FEL
… especially shipboard self defense. The LANL regenerative amplifier FEL (RAFEL) is designed to produce an average output power of 1 kW. This FEL represents a significant increase in average power demonstrated in an FEL and also provides a test of the concept of combining the FEL oscillator and …
-
AN INVESTIGATION INTO THE VERSATILITY OF A TITANIUM:SAPPHIRE REGENERATIVE AMPLIFIER LASER SYSTEM FOR AMBIENT MASS SPECTROMETRY
… the use of laser pulses from a titanium:sapphire regenerative amplifier laser system to vaporize analytes in ambient air for mass spectral analysis. The laser system was modified to operate in one of two distinct modes. In femtosecond (fs) mode the laser produced 2.5 mJ, ~60 fs laser pulses …
-
Efficient frequency doubling of an Nd:YLF amplifier system using an LBO crystal
Ultrafast laser amplifiers based on Titanium-doped Sapphire (Ti:Sa) laser crystals to generate multi-Joule femtosecond pulses have grown in popularity, and the pumping architectures used for these amplifiers are of paramount importance. This thesis describes the design and implementation of an …
-
Ytterbium-doped Fiber-seeded Thin-disk Master Oscillator Power Amplifier Laser System
… consists of a low power fiber seed and pre-amplifier, and a solid state thin-disk regenerative amplifier. This system has been designed to generate high power temporally tailored pulses on the nanosecond time scale. Temporal tailoring and spectral control are performed in the low power fiber …
-
An attampt to measure the electron temperature of a Xenon Chloride excimer laser discharge plasma by Thomson scattering
… system was developed so that a commercial Nd:YAG regenerative amplifier could be triggered remotely with a BNC cable and pushbutton switch. This system was used to accurately time a Xenon Chloride transverse discharge laser to the short, high power Nd:YAG pulse to within 5 ns. Attempts were made …
-
Puslaidininkiniais lazeriais kaupinamo Yb:KGW femtosekundinio lazerio veikos dinamika ir spinduliuotės parametrų optimizavimas /
… Yb:KGW laser consisting of an oscillator and a regenerative amplifier and to optimize its radiation parameters using the results obtained. The thermal-lens and nonlinear Kerr medium effect on the stability of the resonator has been studied. On the basis of the results obtained an oscillator …
-
The dynamics and optimization of the radiation of a femtosecond diode pumped Yb:KGW laser /
… Yb:KGW laser consisting of an oscillator and a regenerative amplifier and to optimize its radiation parameters using the results obtained. The thermal-lens and nonlinear Kerr medium effect on the stability of the resonator has been studied. On the basis of the results obtained an oscillator …
-
Didelės išvadinės energijos plataus spektro čirpuotų impulsų optinis parametrinis stiprinimas /
… thesis an original approach for power scaling of regenerative amplifier by implementing several active elements in prolonged resonator has been proposed and investigated. Femtosecond pulse amplification in dual active element Yb:KGW regenerative amplifier has been demonstrated, resulting in boost …
-
High energy broad bandwidth optical parametric chirped pulse amplification /
… thesis an original approach for power scaling of regenerative amplifier by implementing several active elements in prolonged resonator has been proposed and investigated. Femtosecond pulse amplification in dual active element Yb:KGW regenerative amplifier has been demonstrated, resulting in boost …
-
Development of a New Mid-infrared Source Pumped by an Optical Parametric Chirped-pulse Amplifier.
… in two, each arm seeding an erbium-doped fiber amplifier. The output of the first amplifier is sent to a grating-based stretcher to be stretched to 50 ps before seeding the optical parametric chirped-pulse amplifier (OPCPA). The output of the second amplifier is coupled to a highly nonlinear …
-
Ultrafast Lasers and Amplifiers based on Yb-doped Gain Materials
… system, based solely on ytterbium-doped fiber amplifiers, delivers pulses up to 400 μJ and average powers up to 100 W. An extremely stable fiber-based oscillator is presented, delivering 8 nJ pulses at a repetition rate of 38 MHz. Employing a stretched-pulse cavity design, an adjustable …
-
Free electron laser weapons and electron beam transport
… which are examined. One of these designs, the MW regenerative amplifier FEL, is looked at further to determine the feasibility of its design parameters. The second design, the MW oscillator FEL, presents a challenge in understanding the electron beam transport phenomena known as coherent …
-
Demonstration of a compact 100 Hz, 0.1 J, diode-pumped picosecond laser
… picoJoules to more than 100 mJ. The first amplifier is a Yb:YAG based regenerative amplifier operated at room temperature, which amplifies the pulses by a factor of about 106. The second stage is a multi-pass, Yb:YAG based amplifier, which is operated at cryogenic temperatures, and further …
-
Didelės galios pikosekundinis Nd:YAG lazeris čirpuotų impulsų parametrinių stiprintuvų kaupinimui /
… for OPCPA (Optical Parametric Chirped Pulse Amplifiers) pump. The particular attention is paid for the temporal characteristics of the Nd:YAG amplifies output pulse. Employment of Fabry-Perоt etalons in the cavities of two-stage Nd:YAG regenerative amplifier enables for amplified pulse …
-
High power Nd:YAG laser for pumping of OPCPA systems /
… for OPCPA (Optical Parametric Chirped Pulse Amplifiers) pump. The particular attention is paid for the temporal characteristics of the Nd:YAG amplifies output pulse. Employment of Fabry-Perоt etalons in the cavities of two-stage Nd:YAG regenerative amplifier enables for amplified pulse …
-
Nuolatinai kaupinamų regeneracinių lazerinių stiprintuvų dinamika /
… presents a detailed study of continuously pumped regenerative amplifiers based on long-relaxation-time laser media. The goal of the research was to develop a general pattern of complex dynamics peculiar to such systems at high repetition rates and to find a way to improve performance …
-
Dynamics of continuously pumped regenerative laser amplifiers /
… presents a detailed study of continuously pumped regenerative amplifiers based on long-relaxation-time laser media. The goal of the research was to develop a general pattern of complex dynamics peculiar to such systems at high repetition rates and to find a way to improve performance …
-
Generation of Short Laser Pulses by Using Hollow Fibre and Chirped Mirror Compressor System
… (CEI). The input laser was a new Ti: sapphire regenerative amplifier system providing energy of 1mJ per pulse at a duration of the 35fs with 1kHZ repetition rate. Modifications to the initial setup were crucial in achieving the desired goal. A new, angled, incident window was made to eliminate …
-
Third-generation femtosecond technology
… the practical use of a high-power thin-disk regenerative amplifier, its efficient use for pumping a multi-stage OPCPA chain and compression of the resulting pulses. A theoretical exploration of the concept and its extension to different modes of operation, including widely-tunable, high-power …
Page 1 of 2