Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Reinforced concrete construction Testing"”.
-
Non-destructive evaluation of gravity load carrying capacity and lateral load damage of reinforced concrete slab-column connections
… objective, guidelines for damage assessment of reinforced concrete flat-plate buildings were developed. The intent of the guidelines was to assist engineers assess lateral load damage in the field and estimate the gravity load carrying capacity of the slab-column connection after an earthquake. …
-
Seismic performance of full-scale reinforced concrete columns
The deformation capacity of a concrete column can be expressed by using different ductility parameters such as curvature ductility, displacement ductility or drift capacity. However, little research has been conducted into the relationship among different ductility parameters. The objectives of …
-
Experimental study of rectangular and square concrete member under combined biaxial bending and tension
… interaction diagrams and failure surface for reinforced concrete rectangular and square columns under combined biaxial bending and axial load. In this research, two rectangular columns and two square columns subject to biaxial bending and tension were tested and compared with the proposed …
-
Failure surface for L-shaped reinforced concrete short columns
… bending and axial compression for L-shaped reinforced concrete short columns is a common problem. But the present ACI Building Code (ACI 318-77), handbooks and texbooks pay no attention to this problem. A numerical analysis and computer program developed by Hsu fora reinforced concrete …
-
Analysis and tests [of] L-shaped reinforced concrete column under combined biaxial bending and axial compression
… the load-deflection relationships for L-Shaped reinforced concrete columns under combined biaxial bending and axial compression. Calculated results were compared with the theoretical results from computer program and satisfactory agreement was obtained.
-
Non-linear analysis of reinforced concrete plane frames / by John Mark Kenyon.
Includes corrigenda inside back cover.
-
Behavior of high strength irregular shaped reinforced concrete columns under combined biaxial bending and compression
… and circular shapes, channel and L-shaped reinforced concrete columns are a common design problem for engineers. Since the available design aids and the current code provisions do not provide adequate guidelines for evaluating the ductility and strength of biaxially-loaded reinforced …
-
Behavior of thin-walled channel shaped reinforced concrete columns under combined biaxial bending and compression
… section may be the most frequently encountered reinforced concrete columns since they can be used as box wall for elevators. Nevertheless, information about the load deformation behavior is not generally available to structural engineers. Most of the investigations have been emphasized on the …
-
Evaluation of Low and High Frequency Dynamic Response for Condition Assessment of Reinforced Concrete Structures
Concrete is widely used for civil infrastructure structures and they experience deterioration and degradation due to aging, increases in the traffic loads, harsher environmental conditions, use of deicing chemicals, etc. Therefore, evaluating the integrity of reinforced concrete structures has …
-
Load and resistance factor design of drilled shafts at the service limit state
A practical and efficient procedure for evaluation of drilled shafts at the service limit state is proposed. The procedure uses Load and Resistance Factor Design (LRFD) concepts to achieve target probabilities of failure without requiring case-specific probabilistic analyses. Proposed resistance …
-
Progressive collapse behavior of reinforced concrete structures with deficient details
Damage from abnormal loading such as explosion, bombing, and sudden external impacts on elements of a structure can range from a loss of individual elements to total collapse. Progressive collapse has been a concern for many years, but recent acts of terrorism including the destruction of the World …
-
Experimental Behavior of High Strength Concrete Slabs Subjected to Shock Loading
… characterizes the response of high strength concrete panels, reinforced with high strength vanadium steel, subjected to blast loading under controlled conditions. This work is intended to provide valuable data to study numerical models such as the commonly used single-degree-of-freedom (SDOF) …
-
Deformation capacity and moment redistribution of partially prestressed concrete beams
… minimum ductility requirements on structural concrete members to try to prevent premature non-ductile failure and hence to ensure adequate strength and ductile-type collapse with large deflections. The requirements also enable members to resist imposed deformation due to differential …
-
Behavior of Non-Ductile Slender Reinforced Concrete Columns Retrofit by CFRP Under Cyclic Loading
… region and many countries in the world, older reinforced concrete (RC) columns are deemed to be weak in seismic resistance because of their low amount of reinforcement, low grades of concrete, and large spacing between the transverse reinforcement. The capacity of older RC columns that are also …
-
Behavior of reinforced concrete column-beam joint subjected to close in blast loads with polyurea and FRP sheets
… thesis investigates the structural response of reinforced concrete (RC) column-beam joint under close-in blast loads using finite element modeling in LS-DYNA with an Arbitrary Lagrangian-Eulerian (ALE) formulation. Failure is captured through element erosion based on maximum principal strain. …
Page 1 of 2