Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 341 for “"Reinforcing Steel"”.
-
Bond Strength of Grade 100 Reinforcing Steel
The bond strength of Grade 100 ASTM A 1035 reinforcing steel manufactured by MMFX Technologies Corp. is evaluated with respect to bond strength equations found in ACI 318-05 and ACI 408R-03. Test specimens are fullscale beam-splice specimens tested in four-point bending to create a constant moment …
-
Corrosion of Alternative Grades of Reinforcing Steel in Concrete
Reinforcing steel in concrete has been used for many years in roads, bridges and other structures to give strength and durability; concrete has only good compressive strength and reinforcing steel gives the tensile strength to the concrete to sustain both the compressive and tensile load, making …
-
An experimental study of hook anchorage of reinforcing steel
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1949
-
The mechanical properties of reinforcing steel bars at low temperature.
The mechanical properties of four reinforcing steel bars were evaluated in the temperature range from -40°C (-40°F) to 40°C (104°F). The steel bars were: #9G60 (sigmays = 60 ksi), #9G40 (sigma ys = 40 ksi), #6G60 (sigmays = 60 ksi), and #6G40 (sigma ys = 40 ksi). Both tension and …
-
Bond Strength of ASTM A 1035 Grade 100 Reinforcing Steel
The bond strength of ASTM A 1035 Grade 100 reinforcing steel is evaluated relative to the values predicted using the development expressions in ACI 318-05 and ACI 408R-03. Sixty-nine beam-splice specimens were tested at the University of Kansas, North Carolina State University, and the University …
-
Bar development and tension lap splice of high-strength reinforcing steel
High-strength reinforcing steel with yield strengths up to 100 ksi have been implemented in design code, but it is not common in practical bridge design. High-strength reinforcement bears opportunities for higher load-carrying capacity, reduced congestion, cost savings, and corrosion-resistance in …
-
Evaluating Corrosion Resistance of Reinforcing Steel in a Novel Green Concrete
… life with minimal maintenance. Corrosion of reinforcing steel is a major factor in reducing concrete structure lifespan, as corrosion products occupy a larger volume than that of the consumed steel and generate tensile stresses that crack the concrete cover. Procedures to control corrosion in …
-
Field Performance of Epoxy-Coated Reinforcing Steel in Virginia Bridge Decks
… corrosion protection performance of epoxy-coated reinforcing steel (ECR) was evaluated in 18 concrete bridge decks in Virginia in 1997. The decks were 2 to 20 years old at the time of the investigation. The concrete bridge deck inspections included crack survey and cover depth determination in the …
-
Influence of Bridge Deck Concrete Parameters on the Reinforcing Steel Corrosion
Chloride induced corrosion of steel in concrete is one of the major forms of deterioration mechanisms found in reinforced concrete bridges. Early age corrosion damage reduces the lifespan of the bridges, which results in heavy economic losses. Research has been conducted to identify economic …
-
Phosphate-doped borosilicate enamel coating used to protect reinforcing steel from corrosion
… coatings to provide corrosion protection for reinforcing steel in concrete. Phosphates have low solubilities in borosilicate glasses, generally less than about 4 mol%, and are incorporated mainly as isolated PO43- and P2O74- anions, along with some borophosphate bonds. With the addition of …
-
Detail Design of Prototype Portable Cordless Reinforcing Steel Combination Cutter and Bender
… design a prototype portable handheld reinforced steel-rod combination bender and cutter for use on construction sites; where access to a power source is limited. This thesis covers the research of current cutters and benders on the market, concept generation, development, materials selection, and …
-
Bond Behaviour between Reinforcing Steel Bars and Fly ash-based Geopolymer Concrete
… a sufficient bond between the concrete and the reinforcing bars. Before being utilised in any concrete structures, GPC must demonstrate that it possesses adequate bond strength and predictable bond behaviour with commercial steel reinforcements. Although the importance of investigating the bond …
-
Influence of Reinforcing Steel Parameters on the Formation of the Passive Layer
… study, twenty-seven specimens were cast with reinforcing steel to represent reinforcing mats at the top and bottom of each specimen. Top and bottom spacing arrangements were approximately 51, 76, 102 mm (2, 3, and 4-inches), cathode-to-anode bar (C/A) ratios were 2 and 1, and the presence and …
-
Corrosion of reinforcing steel in loaded cracked concretes exposed to de-icing salts
The corrosion of the reinforcing steel in concrete by de-icing salts is one of the major issues concerning the durability of reinforced concrete. Different methods have been used to protect the reinforcing steel, but still corrosion of reinforced structures continues to be a big problem causing …
-
An investigation of bond-slip behavior of reinforcing steel subjected to inelastic strains
… developed from experimental tests conducted on reinforcing bars with short embedment length, where the slip of test bar occurred when they were subjected to strains well below the yield strain. Consequently, these models are strictly not applicable to critical flexural regions such as the …
-
Corrosion Protection Service Life of Epoxy Coated Reinforcing Steel in Virginia Bridge Decks
… ECR, 10 to 12 cores were drilled through a top reinforcing bar adjacent to the previous study core locations. In addition, approximately 3 cores were drilled through a top reinforcing bar at a surface crack location. Laboratory testing involved nondestructive monitoring using advanced …
Page 1 of 18