Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 544 for “"Relative Density"”.

  1. Assessing competition using absolute and relative growth rates and relative density of wood for red pine (Pinus resinosa Ait.)

    … (Pinus resinosa Ait.) on tree growth and on the relative density of wood were examined. Data came from a spacing trial with initial spacings ranging from 1.2x1.2 m to 6.0x6.0 m; individual trees were measured for DBH, height, and crown dimensions at several ages. The first objective was to …

    ubc Repository record for Assessing competition using absolute and relative growth rates and relative density of wood for red pine (Pinus resinosa Ait.) (opens in a new tab) Download PDF for Assessing competition using absolute and relative growth rates and relative density of wood for red pine (Pinus resinosa Ait.) (opens in a new tab)

  2. Influence of cambial ageing, initial spacing, stem taper and growth rate on the wood quality of three coastal conifers

    … latewood width, latewood proportion, earlywood relative density, latewood relative density, whole-ring relative density, whole-ring tracheid length and microfibril angle. Juvenile wood development was determined based on whole-ring relative density trends from pith to bark. A highly significant …

    ubc Repository record for Influence of cambial ageing, initial spacing, stem taper and growth rate on the wood quality of three coastal conifers (opens in a new tab) Download PDF for Influence of cambial ageing, initial spacing, stem taper and growth rate on the wood quality of three coastal conifers (opens in a new tab)

  3. FEM and DEM modelling of briquetting of fine powders: multi-scale analysis of briquette structural and mechanical properties

    … simulation results with experimental data. The relative density and stresses of the briquettes showed inhomogeneous distributions in the flow direction. The parametric studies showed that the feed pressure affected the briquetting process considerably as both relative density and power draw …

    unsw Repository record for FEM and DEM modelling of briquetting of fine powders: multi-scale analysis of briquette structural and mechanical properties (opens in a new tab)

  4. Liquefaction Potential of Unsaturated Nevada Sand Considering Different Intial Conditions

    … and 2) how do the initial conditions, including relative density, effective confining pressure, and degree of saturation affect the liquefaction potential of unsaturated soils? To answer the above questions, a series of strain-controlled undrained cyclic loading triaxial tests on saturated and …

    south-carolina Repository record for Liquefaction Potential of Unsaturated Nevada Sand Considering Different Intial Conditions (opens in a new tab)

  5. Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials

    … under isotropic compression at two different relative densities. Constant volume, cyclic simple shear simulations at a low relative density under various loading intensities show that increasing the coefficient of uniformity initially increases, then decreases, the cyclic liquefaction …

    ubc Repository record for Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials (opens in a new tab) Download PDF for Effects of particle size distribution and particle shape on cyclic liquefaction response of granular materials (opens in a new tab)

  6. Additively manufactured porous metamaterials: an investigation on compressive performance, failure characterisation and the effects of geometry variations of uniform and stochastic lattices

    … stiffness, strength and energy absorption at low density. As a result, these natural materials occupy a large range of material property space, enabling properties to be efficiently matched to performance requirements. As manufacturing techniques have developed, the property space occupied by …

    soton Download PDF for Additively manufactured porous metamaterials: an investigation on compressive performance, failure characterisation and the effects of geometry variations of uniform and stochastic lattices (opens in a new tab)

  7. Estudo da resistência ao cisalhamento e densidade relativa das areias e correlações com o SPT

    … the determination of ''maximum" and "minimum" density of sand and finishes, adopting "dynamic compactation'' and the Kolbuszewski 's Method'' to obtain the maximum and minimum density respectively. The second part, the characterization and "direct shear'' tests performed on nine different kinds …

    brazil-uerj Repository record for Estudo da resistência ao cisalhamento e densidade relativa das areias e correlações com o SPT (opens in a new tab)

  8. Arithmetic structures in random sets

    … to dense subsets of random sets with asymptotic density 0. Our proofs require a transference argument due to Green and Green-Tao which enables us to apply known results for sets of positive upper density to subsets of random sets which have positive relative density. We also prove a density …

    ubc Repository record for Arithmetic structures in random sets (opens in a new tab) Download PDF for Arithmetic structures in random sets (opens in a new tab)

  9. Numerical Study of Cone Penetration in Calcareous Sands: Investigating Cone Tip Resistance Correction Factors for Crushable Soils

    … relates to liquefaction susceptibility through relative density, where relative density is closely related to both cone tip resistance and liquefaction susceptibility. Currently, published methods of estimating liquefaction potential (i.e., cyclic resistance ratio) are based on silica sands and …

    portland-state Repository record for Numerical Study of Cone Penetration in Calcareous Sands: Investigating Cone Tip Resistance Correction Factors for Crushable Soils (opens in a new tab)

  10. The Natural History, Ecology, and Molecular Detection of Jollyville Plateau Salamanders (Eurycea tonkawae)

    … creeks during which we collected data on relative abundance, relative density, size demographics, reproductive condition, location within the creek systems, and habitat components. First, we modeled the reproductive phenology of E. tonkawae and provided novel data on clutch size. Eurycea …

    texas-state Repository record for The Natural History, Ecology, and Molecular Detection of Jollyville Plateau Salamanders (Eurycea tonkawae) (opens in a new tab)

  11. Field and Laboratory Investigation of Asphalt Pavement Permeability

    … quality of the newly finished roads utilizes relative density alone which may not necessarily reflect the actual properties that are required in the finished pavement. This research aims to perform comprehensive investigations concerning the hot mix asphalt (HMA) pavement permeability as a …

    carleton Repository record for Field and Laboratory Investigation of Asphalt Pavement Permeability (opens in a new tab)

  12. Microstructural Development of Inconel 625 Nickel-Based Superalloy as Function of Laser Powder Bed Fusion Parameters

    … image analysis were carried out to determine relative density of the samples. All laser powers evaluated yielded at least one sample with relative density above 99.7% as determined through both measurement techniques. Correlation of energy density with resulting sample porosity was identified …

    ucf Repository record for Microstructural Development of Inconel 625 Nickel-Based Superalloy as Function of Laser Powder Bed Fusion Parameters (opens in a new tab)

  13. Electrical resistivity of sandy soil with water, leachates and seawater

    … specifically water/fluid content and relative density of the soil, and the types of permeant employed in the tests, namely distilled water, tap water, three leachates and seawater. For a landfill system situated near a salt water body, the effects of seawater and seawater-leachate …

    edithcowan Repository record for Electrical resistivity of sandy soil with water, leachates and seawater (opens in a new tab)

  14. Relationship of cone production to wood traits of lodgepole pine

    … and analyzed using X-ray densitometry. The relative density of each tree at breast height (1.38 m above ground), per-year volume and per-year bolewood biomass were calculated. In addition, cone counts were recorded from the seed orchard over a period of several years. The earlywood, …

    ubc Repository record for Relationship of cone production to wood traits of lodgepole pine (opens in a new tab) Download PDF for Relationship of cone production to wood traits of lodgepole pine (opens in a new tab)

  15. Simulation of the powder forging process for titanium components using a porous metal plasticity model

    … the powder forging process that can predict the relative density distribution. The simulation is carried out in Abaqus software and the results are compared with experimental results. A gamma particle radiography technique is used to compare the experimental density results with the simulated …

    waikato-masters Repository record for Simulation of the powder forging process for titanium components using a porous metal plasticity model (opens in a new tab) Download file for Simulation of the powder forging process for titanium components using a porous metal plasticity model (opens in a new tab)

  16. Effects of confining pressure and static shear on liquefaction resistance of Fraser river sand

    … by static shear, confining stress and relative density levels are considered. It is shown that both Kσ and Kα factors that are used to modify the cyclic resistance value at a reference confining stress of 100 kPa and no static shear to account for higher confining stresses and static …

    ubc Repository record for Effects of confining pressure and static shear on liquefaction resistance of Fraser river sand (opens in a new tab) Download PDF for Effects of confining pressure and static shear on liquefaction resistance of Fraser river sand (opens in a new tab)

  17. Fabrication and Compressive Yield Strength of Open Cell Corrugated Cellular Solids

    … to create cellular solids having relative densities ranging from 0.0384 to 0.0920. Test samples were then quasistatically compressed to measure the stress-strain response. The stress level at 25% strain (compressive yield strength) was plotted as a function of relative density and …

    embry-riddle Repository record for Fabrication and Compressive Yield Strength of Open Cell Corrugated Cellular Solids (opens in a new tab)

  18. Modelling the effective properties of magneto-electro-elastic three-dimensional cellular solids

    … and permittivity were studied as a function of relative density. Result obtained for purely elastic properties were plotted against the relative density. Different thickness of the three-dimensional foam under consideration was studied by varying the Poisson's ratio. The obtained results of the …

    colostate Repository record for Modelling the effective properties of magneto-electro-elastic three-dimensional cellular solids (opens in a new tab)

  19. Stepwise gradient acoustic liners for engine noise reduction applications

    … initial study with metal foams with increasing relative density, compression ratios, and decreasing pore sizes showed that the acoustic properties—the sound absorption coefficient and sound transmission loss—improved over a broad frequency range. Further, we studied stepwise relative density …

    wichita-thes Repository record for Stepwise gradient acoustic liners for engine noise reduction applications (opens in a new tab)

Page 1 of 28