Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Relay settings"”.
-
Real time adaptive relay settings for Microgrid protection verified using Hardware in Loop
… mode of microgrid to go unnoticed if the relay settings are not adapted to account for it. The presence of such uncleared faults in the microgrid can result in exposing it to overcurrent for a long time which can damage the equipment. One solution is to have different protection element …
-
Setting transmission line out-of-step relays in complex power systems
… conditions. Power swings can result in unwanted relay operations that may further aggravate the disturbance leading to blackouts as the August 10, 1996, Western North America blackout. OOS protection can be employed to detect such power swings and strategically block certain protection elements …
-
ADAPTIVE GROUND FAULT PROTECTION FOR A DISTRBUTION NETWORK
… more utilities are using microprocessor based relays for protection of power system equipment However, the protection philosophy remains the same. The present practice of protection is to analyze all the abnormal operating conditions in advance and to set the relays considering all the …
-
Web-based relay management with biometric authentication
… proposes a web-based system for managing digital relay settings. These relays are deployed in the power system to protect sensitive and expensive equipment from physical damage during system faults and overload conditions. Providing this capability exposes these devices to the same cyber security …
-
Impacts of midpoint FACTS controllers on the coordiantion between generator phase backup protection and generator capability limits
… generator distance phase backup protection relay in order to alleviate potential problems. It has been demonstrated that this technique is a very promising solution, as it is fast, reliable and has a high performance efficiency. This will result in enhancing the coordination between the …
-
DESIGN AND IMPLEMENTATION OF A MICROPROCESSOR-BASED ADAPTIVE PROTECTION FOR A DISTRIBUTION NETWORK
The development of microprocessor-based relays started in early 1970's. Many researchers have had the view that long range economic trend favours the use of microprocessors in protective relays. As a result, for the last 25 years an extensive research has been carried out on digital protection. The …
-
Simulation of power station protection equipment
… enable the coordination of fuses and overcurrent relays for radial power systems under estimated fault current conditions. The grading curves for these protection devices can be produced on a graphics terminal and a hard copy can be obtained. Additional programs have also been developed which …
-
Analysis of the dynamic behaviour of power systems under emergency conditions
… of load shedding policy and the appropriate relay settings.
-
DESIGN AND SIMULATION OF SOFTWARE FOR A HIGH SPEED DIGITAL DISTANCE RELAY
Distance relays are used for the protection of transmission lines in electric power systems. These relays estimate an apparent impedance of the protected line from the relay location to the fault and compare it with the relay settings for making decisions. Many approaches have been suggested in the …
-
Fault location and analysis in transmission and distribution networks
… can alter fault current levels and result in relay misoperations. Finally, data recorded by IEDs during a fault contain a wealth of information and are prime for use in other applications that improve power system reliability. Based on the above background, the first objective of this …
-
Computer aided design of protection systems for electrical drives
… procedures presently used in determining relay settings. To further this aim, a series of algorithms have been devised which allow exploitation of the concept. The areas chosen for demonstration are, direct-on-line started induction motors and transformer fed variable speed drives. In both …
-
IMPACT OF GRID-CONNECTED IBRs ON AC TRANSMISSION LINE PROTECTION
… used in the inverters determine what the relays see. These controls usually limit the maximum current to 1.1-1.5 pu. Moreover, the controls convert the three-phase current into dq0 domain, making the phase currents indistinguishable during a fault. Conventional relay protection schemes, …
-
A MICROPROCESSOR-BASED SYSTEM FOR PROTECTION OF POWER TRANSFORMERS
Differential, overcurrent and ground fault relays are used for protecting transformers in electric. power systems. Several algorithms, that perform these functions and are suitable for implementation on microprocessors, have been proposed in the past. This thesis describes and evaluates an improved …
-
APPLICATION OF MODAL TRANSFORMATION FOR FAULT ANALYSIS AND DIGITAL DISTANCE RELAYING
… lines are usually protected by distance relays that measure the apparent distances of faults and compare them with the relay settings to determine if the fault is inside the protected zone. The information required for setting relays is generally obtained from fault analysis studies. …
-
A methodology for performance and compatibility evaluation of an all-digital substation protection system
… instrument trans- former, a protective device (relay), and a circuit breaker. Conventional instrument transformers bring currents and voltages from power network levels to much lower scaled-down replicas that serve as input signals to protective relays. The relay's function is to measure input …
-
IMPLEMENTATION OF SWING CENTER VOLTAGE METHOD FOR POWER SWING DETECTION USING SYNCHROPHASOR TECHNOLOGY
… disturbance and the system topology. This makes relay settings a challenging task to initiate appropriate correction in all possible swing scenarios. In this report, the problem of power swing detection is analyzed based on Swing Center Voltage (SCV) method. The SCV method is independent of …
-
Optimum coordination of directional overcurrent relays in a distribution network with distributed generation
The conventional relay protection coordination method is mainly used in the industry to calculate the protective overcurrent relay settings. The conventional method requires many inputs and does not produce the best relay coordination results. When there are multiple sources, the calculation …
-
Novel Algorithms for Modern Power Systems
… Power Engineering is used for the evaluation of relay settings. A new approach is proposed to use object oriented techniques and improved genetic algorithms in developing software to estimate generator excitation control system parameters. Simulation studies are carried using data representing a …
-
Distribution system reliability enhancement
… of supply in distribution system, adaptive relaying and optimal network reconfiguration are proposed. By optimizing the system to be better prepared to handle a fault, the end result will be that in the event of a fault, the minimum number of customers will be affected. Thus reliability will …
-
Modern Adaptive Protection and Control Techniques for Enhancing Distribution Grid Resiliency
… in the distribution system such as overcurrent relays, reverse power relays at Point of Common Coupling(PCC), fuses, reclosers and feeder breakers need to studied in implementing these schemes. The work presented in this dissertation deals with simulation based and analytical approaches to …
Page 1 of 2