Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 125 for “"Remelting"”.
-
Electrochemical aspects of D.C. electroslag remelting
It is predicted from the known ionic properties of the slags used in electroslag melting, that the D.C. melting process should be accompanied by Faradaic reactions on the slag/ingot and slag/electrode interfaces. In the present work we have determined the magnitude of the overpotentials resulting …
-
Thermodynamics of hydrogen in electroslag remelting
Oxide ion activities in binary CaF₂ - CaO and ternary, CaF₂ -CaO - Al₂O₃ and CaF₂ - CaO -SiO₂, slags were determined by CO₂-slag equilibrium experiments at 1400°C. The carbonate capacity of these slags was computed and compared with the sulfide1 capacity data available in the literature. The …
-
Thermal characteristics of the electroslag remelting process
The thermal characteristics of the electroslag remelting process have been investigated on a laboratory scale unit. The heat generation and distribution in the slag bed is discussed. The voltage gradients in the slag bed are predicted using a resistance network analogue and tested against …
-
Mass transfer aspects of A.C. electroslag remelting
… description of alloy losses in electroslag remelting (ESR) operations have not adequately reflected the true nature of this process. In the current work a mass transfer model was developed which takes into account four reaction sites and mass transfer of all species at each site. An …
-
Modeling, estimation, and control of electroslag remelting process
Electroslag Remelting (ESR) is used widely throughout the specialty metals industry to produce superalloy and special steel cast ingots. High quality ESR casting requires that the electrode melting rate be controlled at all times during the process. This is especially difficult when process …
-
A study of inclusion behaviour during electroslag remelting
… and behaviour of inclusions during electroslag remelting: - dissolution in the liquid metal of the inclusions already present in the electrode and then renucleation in the freezing ingot. - total or partial dissolution in the slag. - exchange reactions between inclusions in the metal and the …
-
Electromagnetic stirring with alternating current during electroslag remelting
The electroslag remelting process combines both a chemical refining ability and a better control on solidification which produces materials of more uniform properties. In spite of the advantages of this process, segregation-prone alloys are still difficult to produce via ESR, particularly when …
-
The thermal regime during electron beam hearth remelting
Electron beam hearth remelting is extensively used in refining of superalloys, titanium alloys and the recycling of these materials. The removal of impurities and exhogenous particles during the hearth melting operation depends primarily on the time at temperature relationship developed within a …
-
Removal of calcium containing inclusions during vacuum arc remelting
… containing inclusions in steel during Vacuum Arc Remelting has been investigated. Laboratory Electron Beam and industrial Vacuum Arc remelting electrodes and ingots were examined. Properties of the steels were determined with the aid of chemical and metallographic methods. It is proposed that the …
-
The origin of inclusions in the electroslag remelting process
The aim of this work was to determine whether (ASTM E-45) D-type inclusions are a necessary component of ESR ingots. Therefore, experiments were undertaken to ascertain the origin of the inclusions. Pure iron (FVE) and electrolytic nickel were melted through CaF₂+CaO+Al₂0₃ slags, and the changes in …
-
A Study of Reaction Sites in AC Electro-Slag Remelting
… slag-metal reaction site in AC electro-slag remelting (ESR) has been directly determined by estimating the rate of sulphur transfer at the electrode tip/slag and metal pool/slag interfaces. In this investigation, negligible sulphur transfer has been assumed at the droplet/slag interface, and …
-
Fatigue life extension of welded steel structures by peening and TIG remelting
… and retrofit any existing crack, Peening and TIG remelting are just examples. A literature study is conducted to establish better understand on the effect of these two treatment methods their efficiency in crack retrofitting. The crack retrofitting experiments consist of two stages, pre-fatigue …
-
Laser Remelting of Yttria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying
ABSTRACT Laser Remelting of Yttria Stabilized Zirconia Coatings Deposited by Suspension Plasma Spraying ASHKAN BAADI CONCORDIA UNIVERSITY, 2020 Thermal barrier coatings (TBCs) are applied as a protective layer in a range of applications, mainly in the aero-engine and power generation industries to …
-
Implementation of a high-fidelity axisymmetric model in a Vacuum Arc Remelting process
Vacuum Arc Remelting (VAR) is a secondary process used for homogenization of high-melting-point and oxygen-sensitive materials such as superalloys and titanium alloys. The VAR process is carried out with the aim of melting a large consumable electrode in such a way that the resulting ingot has …
-
Quantification of the heat transfer during the plasma arc remelting of titanium alloys
Plasma-arc cold hearth melting (PAM) is an important technology used in the melting process for titanium alloys. Compared to the more common, electron beam cold hearth re-melting process, PAM allows an inert gas environment which significantly reduces the evaporation rate of alloying elements. To …
-
Influence of Remelting on Microstructural Defects in Laser Powder Bed Fusion-Produced Tungsten
… approach to reduce these defects is in-situ remelting, where previously solidified material is re-exposed to the laser to modify the melt pool conditions. Remelting has been shown to reduce porosity and influence solidification behavior in other materials, but its effect on pure tungsten is …
-
Effects of changing melt parameters on aspects of solidification structure during experimental electroslag remelting, The
Includes bibliographical references.
-
Numerical grid generation and its application in the solution of a model of the vacuum-arc remelting (VAR) process
… derive the equations which model the Vacuum-Arc Remelting (VAR) process. These equations are solved with body-fitted grid generation techniques and the results are compared with the results of previous authors. A different form for the input source for the VAR process is tested and the results …
-
Influência do número de refundições da liga Ni-Cr-Mo-Ti sobre as propriedades de próteses metalocerâmicas
… production of metal-ceramic replacement systems. Remelting such materials could impar their use in oral rehabilitation due to loss in esthetics, as well as in the chemical, physical, electrochemical and mechanical properties. Nowadays, the Ni-Cr-Mo-Ti alloy is widely used in metal-ceramic systems. …
-
Comportamento em fluência do aço 1CrMoV forjado processado em forno de refusão a arco
… development of the steelmaking process. The remelting step was inserted in the 1CrMoV steel manufacturing process in the 1960s with the promise of reducing the amount of harmful elements aiming at improving the steel properties. In this work, the microstructural effects that give 1CrMoV steel …
Page 1 of 7