Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 580 for “"Removal rate"”.
-
Material Removal Rate Control for a Teleoperated Robotic Sander
… this issue, a model of the sanding material removal rate is derived and experimental parameters are estimated. Furthermore, this model can be used to determine the normal force required to maintain a consistent material removal rate. A controller is then designed, implemented, and tested to …
-
Examination of the Material Removal Rate in Lapping Polycrystalline Diamond Compacts
… of the parameters that affect the material removal rate (MRR) and MRR uniformity of lapped PDC samples. Experiments that focused on several controllable lapping parameters were performed to determine to what extent they affected the process. It was determined that the MRR can be modeled with …
-
Optimization of Wire Diameter for Maximizing Removal Rate in Wire Electrical Discharge Machining
… is wire breakage. To increase the Cutting Rate (CR) more power is required, and increasing power also increases the likelihood of breakage. The goal of this research is to determine whether wires thicker than the conventional 0.25 mm diameter will both optimize the cutting rate and minimize …
-
Stochastic models for material removal rate (MRR) in chemical mechanical planarization (CMP) process
… work related to the prediction of the material removal rate (MRR) in CMP process to date has been concerned with the ideal case, wherein there is no randomness associated with either the pad or the slurry. In the work of this dissertation, we investigated the material removal rate (MRR) by …
-
Engineering the Surface Chemistry and Surface Conditions to Optimize the Heat Removal Rate of Various Surfaces
… these different treatments can enhance the heat removal rate for different systems. This dissertation presents two main regions of research that, when combined, can enhance understanding of cooling rates for different surface treatments. The first region is utilizing time domain thermoreflectance …
-
Manipulation of carbon media, temperature and hydraulic efficiency to increase nitrate removal rate in denitrification beds
… beds are one such method. Improving the nitrate removal rate of denitrification beds will lead to reduced bed volumes, lower construction costs that likely facilitate greater uptake of the technology and reduced accumulation of Nr in the environment. The main objective of this thesis was to …
-
Influence of Solvent Removal Rate and Polymer Concentration on Ordering Kinetics of Block Copolymers in Solution
… was also developed for studying different drying rates of these films at a constant temperature. Temperature quenches of poly(styrene-b-isoprene-b-styrene) were performed to evaluate the effect of concentration on ordering rate. In all cases studied, an ordering layer was observed where …
-
Optimization of Nitrogen Removal Rate in One-Stage Reactor through Partial Nitrification Anammox Process during Direct Treatment of Poultry Litter Wastewater
… this project is aimed at optimizing the nitrogen removal rate through partial nitrification anammox process (PN/A) to treat synthetic poultry litter wastewater. Nitrogen removal efficiencies will therefore be improved through optimizing the combination of three operating parameters including …
-
Modeling and control of material removal and defectivity in chemical mechanical planarization
… have been deterministic, accounting for material removal by a single isolated particle. These models predicted the quality control parameters such as material removal rate and planarization at global scales. Recently, probabilistic models have been developed to describe material removal rate from …
-
Evaluation and Modeling of Alternative Copper and Inter-Layer Dielectric Chemical Mechanical Planarization Technologies
… slurries were found to be effective in copper removal and were shown to demonstrate similar removal rate and coefficient of friction (COF) trends as conventional abrasive slurry CMP, while possibly decreasing wafer defects. Fundamental information from the friction spectrum indicated that the …
-
Characterization and Modeling of Mainstream and Alternative Conditioning and Polishing Technologies in Inter-Layer Dielectric and Copper Chemical Mechanical Planarization
… allowed for stable polish results in terms of removal rate and coefficient of friction (COF).The theoretical and experimental investigation of conventional diamond disc pad conditioning was performed to explore the effects of conditioner design factors on removal rate and COF in copper CMP. In …
-
Biological Detoxification of Mercury Contaminated Soil
This study examined biological mercury removal from soil using mercury-resistant bacteria in soil microcosms. Mercuric chloride was used to artificially contaminate Kidman soil to mercury concentrations of 5 ppm and 10 ppm. Soil moisture content was maintained at three levels, 20%, 30% and 50%. …
-
Plasma chemical driven biomedical applications with a radio frequency driven atmospheric pressure plasma jet
… various biomedical applications such as tissue removal, bacterial sterilization, and tooth whitening. Two different types of plasma assisted electrosurgery, remote electrode plasma jet and plasma jet surrounding monopolar electrosurgical electrode, were employed to enhance tissue removal in …
-
Denitrifying bioreactors - Expanding applications to stormwater
… bioreactors have proven effective at reducing nitrate loads from agricultural tile drainage. However, flows associated with storm events can cause conditions that may decrease the effectiveness of the bioreactors for nitrate reduction by decreasing hydraulic retention time. Stormflow may also …
-
Predicting aircraft equipment removals during initial provisioning period
… into the characteristics of program elements and removals of Weapon Replaceable Assemblies aggregated at the system level for the purpose of developing a method to predict removals during initial provisioning periods. From examination of nine avionic systems over a 28 month period a binomial model …
-
Study of the Effect of BiOWiSH Aqua on Simultaneous Nitrification and Denitrification in a Membrane Aerated Bioreactor
… for the remainder of this paper, on the nitrogen removal rate in a membrane aerated bioreactor (MABR). This research was conducted using a MABR design that consisted of a silicone membrane and continuous flow airline with compressed air. The membrane system was designed to supply oxygen, creating …
Page 1 of 29