Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 30 for “"Repeated Load Triaxial"”.

  1. Subgrade resilient modulus testing at Tennessee instrumented pavement sites : standard and alternative methods

    … to characterize subgrade soils under vehicular loading. The resilient modulus is used in the mechanistic empirical design method to determine strains at the top of the soil subgrade and to predict strains developed in the overlying asphalt layer. The new 2002 AASHTO Pavement Design Guide, which …

    ut-knoxville Repository record for Subgrade resilient modulus testing at Tennessee instrumented pavement sites : standard and alternative methods (opens in a new tab)

  2. Performance of Unbound Granular Basecourse Materials under Varying Moisture Conditions

    … i.e., geological and mineralogical testing, repeated load triaxial testing, full scale accelerated pavement tests. The geology of the source rocks was tested by examining the thin sections obtained from various aggregates. X-Ray Diffraction tests were conducted which helped in finding the …

    auckland-ms Repository record for Performance of Unbound Granular Basecourse Materials under Varying Moisture Conditions (opens in a new tab)

  3. Avaliação da deformação permanente de materiais de pavimentação a partir de ensaios triaxiais de cargas repetidas

    … permanent deformation tests are performed on the repeated load triaxial equipment. The objective included the analysis of the main variables that affect the response of the materials: compaction moisture, compaction process, number of load cycles, and applied stress states. A total of 56 materials …

    brazil-uerj Repository record for Avaliação da deformação permanente de materiais de pavimentação a partir de ensaios triaxiais de cargas repetidas (opens in a new tab)

  4. Performance-based evaluation of unbound aggregates affecting mechanistic response and performance of flexible pavements

    … in flexible pavements is to distribute wheel loads and provide adequate protection of the subgrade. However, the empirical strength based quality evaluations and current “recipe-based” specifications have little direct consideration of the actual performance of materials used in unbound …

    uiuc Repository record for Performance-based evaluation of unbound aggregates affecting mechanistic response and performance of flexible pavements (opens in a new tab)

  5. Permanent Deformation Behaviour of Unbound Granular Materials in Pavement Constructions

    … be described that utilizes test results from the Repeated Load Triaxial Apparatus to establish the risk level of permanent deformations in the unbound granular layers (UGL) in pavement constructions under consideration of the seasonal effects. From this data a serviceability limit line (plastic …

    qucosa-diss

  6. Effect of Subgrade Conditions on Pavement Analysis and Performance Prediction: A Study for Idaho Conditions

    … layer response under vehicular and environmental loading. Representing a material’s ability to ‘recover’ after loading, resilient modulus is determined in the laboratory through repeated load triaxial testing. Although the original test protocol to measure the resilient modulus value of a soil or …

    boise Repository record for Effect of Subgrade Conditions on Pavement Analysis and Performance Prediction: A Study for Idaho Conditions (opens in a new tab)

  7. Comparative Evaluation of Field and Laboratory-Produced Foamed Asphalt Mixture from Reno, Nevada

    … deformation was evaluated through the use of the repeated load triaxial (RLT) to measure the flow number (FN). The low-temperature cracking resistance of the mixtures was evaluated using the thermal stress restrained specimen test (TSRST). From this study it was determined that the HMA had better …

    unr Repository record for Comparative Evaluation of Field and Laboratory-Produced Foamed Asphalt Mixture from Reno, Nevada (opens in a new tab)

  8. Impact of Lime on the Mechanical Properties of HMA Mixtures in Nevada

    … The asphalt pavement analyzer test and the repeated load triaxial test were used to evaluate the permanent deformation of the mixtures. The flexural beam test was used to assess the fatigue resistance and the thermal stress restrained specimen test was conducted to evaluate thermal cracking …

    unr Repository record for Impact of Lime on the Mechanical Properties of HMA Mixtures in Nevada (opens in a new tab)

  9. Resilient Moduli of Flexible Pavement Materials

    … and subbase materials, and subgrade soils in repeated dynamic loading is best represented by their resilient moduli in rational flexible pavement designs. The recoverable, or resilient, strains in pavement structures due to repetitions of moving traffic loads can be predicted through the use …

    mcmaster Repository record for Resilient Moduli of Flexible Pavement Materials (opens in a new tab)

  10. Repeated load testing for primary evaluation of recycled concrete aggregate in pavements

    … virgin aggregate or VA (quartzite). A series of Repeated Load Triaxial Testing (RLTT) using three different RLTT protocols from Australian and New Zealand road authorities were performed under drained conditions on cylindrical specimens. Duplicate specimens were statically compacted at different …

    adelaide Repository record for Repeated load testing for primary evaluation of recycled concrete aggregate in pavements (opens in a new tab)

  11. Characterization of Field-Produced HMA Mixtures from Nevada for Mechanistic-Empirical Pavement Design

    … rutting regression coefficients using the Repeated Load Triaxial (RLT), and fatigue regression coefficients using the Flexural Beam Fatigue tester. Currently the MEPDG prediction models are nationally calibrated and require local or regional calibration to predict pavement performance more …

    unr Repository record for Characterization of Field-Produced HMA Mixtures from Nevada for Mechanistic-Empirical Pavement Design (opens in a new tab)

  12. Performance Evaluation of Cold In-place Recycling Mixtures in Nevada: Laboratory Testing

    … by means of the dynamic modulus master curve, Repeated Load Triaxial Test (RLT), Hamburg Wheel Track Test (HWTT), Overlay Tester (OT), and the beam fatigue test. Mechanistic evaluations of the CIR mixtures were performed after obtaining the rutting and fatigue models of the studied mixtures. …

    unr Repository record for Performance Evaluation of Cold In-place Recycling Mixtures in Nevada: Laboratory Testing (opens in a new tab)

  13. Análise do comportamento mecânico de misturas de solos lateríticos e resíduo asfáltico para uso em camadas de pavimentos

    … The mechanical characterization involved repeated load triaxial tests to determine the resilient modulus (MR) and permanent deformation (PD), considering natural soils and mixtures with 10% and 20% RAP, as well as chemical stabilization with 2% cement. The results indicated that the …

    brazil-ufrn Repository record for Análise do comportamento mecânico de misturas de solos lateríticos e resíduo asfáltico para uso em camadas de pavimentos (opens in a new tab)

  14. Field and Laboratory Characterization of Subgrade Resilient Modulus for the Aashtoware Pavement Me

    … MR can also be obtained directly using repeated load triaxial tests (AASHTO T-307-99). The field test program included (FWD) tests and soil sampling in this study. These field tests were performed on 15 South Carolina pavement sections (11 AC and 4 PCC pavement sections) to estimate the …

    south-carolina Repository record for Field and Laboratory Characterization of Subgrade Resilient Modulus for the Aashtoware Pavement Me (opens in a new tab)

  15. Investigating the reinforcement effect of geogrids in flexible pavements

    … mechanisms were revealed.Firstly, the repeated load triaxial (RLT) test was conducted to investigate the vertical resilient deformation behavior of the reinforced aggregate. The result show that the RLT test was not effective in evaluating the reinforcement effect. To further analyze …

    utk-theses Repository record for Investigating the reinforcement effect of geogrids in flexible pavements (opens in a new tab)

  16. Characterisation and Evaluation of Marginal Basecourse Aggregates and the Performance Improvement with Stabilisers

    … granular aggregates was investigated using repeated load triaxial (RLT) tests under soaked and drained conditions. Lime and cement were used to treat marginal materials. The stress-strain behaviour of stabilised marginal materials was investigated under a soaked condition. The results show …

    auckland-ms Repository record for Characterisation and Evaluation of Marginal Basecourse Aggregates and the Performance Improvement with Stabilisers (opens in a new tab)

  17. Determination of aggregate physical properties and its effects on cross-anisotropic behavior of unbound aggregate materials

    … materials. Variable confining pressure type repeated load triaxial tests were performed on six aggregate sources with three different gradations and three different moisture contents. The experimental results were analyzed within the framework of nonlinear cross-anisotropic elastic model in …

    tamu Repository record for Determination of aggregate physical properties and its effects on cross-anisotropic behavior of unbound aggregate materials (opens in a new tab)

  18. Integration of Innovative Materials to Enhance Sustainability and Durability in Transportation Infrastructure

    … followed by unconfined compression strength and repeated load triaxial testing before and after subjecting the specimens to multiple durability cycles (Wet-Dry or Freeze-Thaw as per ASTM D559 and D560, respectively) to ascertain the durability of geomaterial. The untreated soil specimens were …

    tamu Repository record for Integration of Innovative Materials to Enhance Sustainability and Durability in Transportation Infrastructure (opens in a new tab) Embargoed until 2026-12-01

  19. Characterization and Performance Prediction of Unbound Granular Bases with and Without Geogrids in Flexible Pavements

    … at different stress levels. In this study, the repeated load triaxial tests are performed on a variety of granular materials to determine the resilient modulus and permanent deformation properties. The measured resilient modulus and permanent deformation properties are statistically related to a …

    tamu Repository record for Characterization and Performance Prediction of Unbound Granular Bases with and Without Geogrids in Flexible Pavements (opens in a new tab)

  20. Investigation of Laboratory Test Procedures for Assessing the Structural Capacity of Geogrid-Reinforced Aggregate Base Materials

    … Cooperative Highway Research Program Report 598 repeated load triaxial, American Association of State Highway and Transportation Officials (AASHTO) T 307 quick shear, and CBR testing protocols were used to test unreinforced and geogrid-reinforced aggregate base materials from northern Utah. …

    byu Repository record for Investigation of Laboratory Test Procedures for Assessing the Structural Capacity of Geogrid-Reinforced Aggregate Base Materials (opens in a new tab) Download PDF for Investigation of Laboratory Test Procedures for Assessing the Structural Capacity of Geogrid-Reinforced Aggregate Base Materials (opens in a new tab)

Page 1 of 2