Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 120 for “"Repetition frequency"”.

  1. 10kHz Pulse Repetition Frequency CO2 Laser for Processing High Damage Threshold Materials

    … Continuous machining is possible provided pulse repetition frequencies of up to 10 kHz can be achieved, since, at this frequency, a constantly evaporating liquid phase can be sustained.

    glasgow Download PDF for 10kHz Pulse Repetition Frequency CO2 Laser for Processing High Damage Threshold Materials (opens in a new tab)

  2. Flame Kernel Ignition and Evolution Induced by Modulated Nanosecond-Pulsed High-Frequency Discharge

    … through modulation of nanosecond pulsed high-frequency discharges is investigated quantitatively in a reactive flow. High-frequency discharge and new notions of rotational temperature coupling per subsequent pulse ( < 30 kHz) existing within the breakdown regime have led to the discovery of …

    ucf Repository record for Flame Kernel Ignition and Evolution Induced by Modulated Nanosecond-Pulsed High-Frequency Discharge (opens in a new tab)

  3. Ultrasound-driven mechanosensing and the parameters shaping cellular response in LIPUS

    … varied in pressure, duty cycle, pulse repetition frequency, and temporal envelope, including conditions where ISATA was maintained constant across distinct waveform configurations. This approach allowed the decoupling of acoustic intensity from the resulting mechanical displacement at …

    glasgow Repository record for Ultrasound-driven mechanosensing and the parameters shaping cellular response in LIPUS (opens in a new tab) Download PDF for Ultrasound-driven mechanosensing and the parameters shaping cellular response in LIPUS (opens in a new tab)

  4. A pulse position modulated laser communications system

    … injection layer in the transmitter, operating at repetition frequency eight to fifteen kilohertz, and a p-I-n photodiode in the receiver. Pulse position modulation is used to transfer information as well as to trigger an avalanche transistor switch to drive the laser.

    nps Repository record for A pulse position modulated laser communications system (opens in a new tab)

  5. Inhibition of cracking in pulsed laser welding of aluminium alloys

    … Welds were generated with a high pulse repetition frequency ND3+:YAG laser, capable of operating with a mean power of 500W. The power intensity in the weld was selected by variation of the pulse parameters to achieve the desired welding modes. Control was exercised over the degree of …

    glasgow Repository record for Inhibition of cracking in pulsed laser welding of aluminium alloys (opens in a new tab) Download PDF for Inhibition of cracking in pulsed laser welding of aluminium alloys (opens in a new tab)

  6. Montažinių plokščių (PCB) mikrogręžimas femtosekundiniais lazerio impulsais /

    … by changing the energy of the laser pulse, the repetition frequency, the number of pulses, compare the results with each other and find the optimal drilling mode, which would result in the smallest deviations and the highest quality craters. After conducting the study, it was found that the …

    vilnius Repository record for Montažinių plokščių (PCB) mikrogręžimas femtosekundiniais lazerio impulsais / (opens in a new tab)

  7. Laser welding of high carbon steels

    … on the welding speed, pulse width and pulse repetition frequency (PRF). The effect of varying the laser parameters was quantified by measuring the hardness profiles, tensile strength, weld width, weld penetration and the rare of weld volume formation. Furthermore, microscopic examination was …

    glasgow Download PDF for Laser welding of high carbon steels (opens in a new tab)

  8. Properties and applications of injection locking in 1.55 μm quantum-dash mode-locked semiconductor lasers

    … sources with ultra-narrow pulse widths and high repetition-rates. In order to use these sources in real applications, their performance needs to be optimised in several aspects, usually by external control. We experimentally investigate the behaviour of recently-developed quantum-dash mode-locked …

    cork Repository record for Properties and applications of injection locking in 1.55 μm quantum-dash mode-locked semiconductor lasers (opens in a new tab)

  9. Unravelling reactive oxygen species production in low temperature, atmospheric pressure plasmas

    … model is used to study the influence of pulse repetition frequency on the plasma chemistry of a nanosecond-pulsed, He+H2O plasma. Increasing the pulse repetition frequency increases the density of H, O, and OH radicals. H2O2 and O3 are formed throughout the afterglow, and their density is …

    whiterose Download PDF for Unravelling reactive oxygen species production in low temperature, atmospheric pressure plasmas (opens in a new tab)

  10. Improving the jitter performance of timing recovery by employing delay shifts

    … by a narrowband filter tuned to the pulse repetition frequency. This thesis introduce delay shifts in the timing recovery circuits to improve the jitter performance. The function of the delay shifts is analyzed and mathematical proof of jitter performance improvement is given for the system …

    njit Repository record for Improving the jitter performance of timing recovery by employing delay shifts (opens in a new tab)

  11. Development of an Efficient Ti:Sapphire Laser Transmitter for Atmospheric Ozone Lidar Measurements

    … Ti:sapphire lasers operating at a pulse repetition frequency of 30 Hz and wavelengths of 867 nm and 900 nm, with M2 of 1.3, have been experimentally demonstrated and compared to model results. The Ti:sapphire lasers have shown the required output beam quality at maximum output pulse …

    odu Repository record for Development of an Efficient Ti:Sapphire Laser Transmitter for Atmospheric Ozone Lidar Measurements (opens in a new tab)

  12. Step frequency waveform design and analysis using the ambiguity function

    This thesis investigates the use of the step frequency waveform, its design and analysis using the ambiguity function. The step frequency waveform consists of a series of N pulses each with a pulse width of z, and whose frequency is increased from pulse to pulse in steps of delta f. A design …

    nps Repository record for Step frequency waveform design and analysis using the ambiguity function (opens in a new tab)

  13. PCRLB-Based Radar Resource Management for Multiple Target Tracking

    … high-precision pencil beams, and 3) the pulsed repetition frequency (PRF) set selection and waveform design. Firstly, the coordinated sensor management on the ends of both receivers and transmitters for a multistatic radar is studied. A multistatic radar system consists of fixed transmitters and …

    mcmaster Repository record for PCRLB-Based Radar Resource Management for Multiple Target Tracking (opens in a new tab)

  14. An electron beam controlled diffuse discharge switch

    … a maximum pulse duration of lus, and a variable repetition frequency up to 25 MHz in a lys burst. Results of experiments in various switch gas mixtures are presented. Current gains of approximately 10 and opening times < 100 ns have been observed.

    ttu Repository record for An electron beam controlled diffuse discharge switch (opens in a new tab)

  15. Performance analysis of symbol timing recovery circuits employed in digital communications systems

    … and a narrow band postfilter tuned to the pulse repetition frequency. Assuming first a squarer type of nonlinearity, analytical expressions for the rms jitter in the timing wave are obtained as a function of the pre and post filtering characteristics. These expressions are suitable for judging …

    njit Repository record for Performance analysis of symbol timing recovery circuits employed in digital communications systems (opens in a new tab)

  16. Pulse Power Effects on Transient Plasma Ignition for Combustion

    … to initiate combustion. The effects of pulse repetition frequency (PRF) and ultrashort nanosecond rise times on TPI are investigated in this work using lean, stoichiometric, and rich air-fuel mixtures at atmospheric pressure. Experimental data show the transient plasmas driven by ultrashort …

    odu Repository record for Pulse Power Effects on Transient Plasma Ignition for Combustion (opens in a new tab)

  17. Drone Characterization using Helicopter Rotation Modulation (HERM) Line Signatures

    … at longer ranges using a low pulse repetition frequency (PRF) radars. A simple mathematical model is proposed to describe the HERM line signature using three parameters or features, namely the number of HERM lines, the fundamental frequencies and the number of fundamental …

    carleton Repository record for Drone Characterization using Helicopter Rotation Modulation (HERM) Line Signatures (opens in a new tab)

  18. Characterization and application of Brillouin scattering-based distributed fiber optic sensor

    … as, bias, leakage, PW voltage, pulsewidth, and repetition frequency. Bias is found to be the most important parameter. We also discuss the relationships between the system repeatability and control parameters such as bias, polarization states, averages and frequency lock methods. Four successful …

    ottawa-retro Repository record for Characterization and application of Brillouin scattering-based distributed fiber optic sensor (opens in a new tab)

  19. Radar Space-Time Processing for Range-Folded Spread-Doppler Clutter Mitigation

    … and velocity which is proportional to the pulse repetition frequency (PRF), leading to potential tradeoffs. High PRFs are necessary to avoid velocity aliasing but suffer at the expense of unambiguous range. Obscuration due to ambiguous range foldover from distant clutter echos seriously degrades …

    duke Repository record for Radar Space-Time Processing for Range-Folded Spread-Doppler Clutter Mitigation (opens in a new tab)

  20. Žmogaus gcsfr geno klonavimas, transfekcija ir raiška žinduolinėse ląstelėse /

    … conditions of 4 x 1 ms pulse duration, 1 Hz repetition frequency and 1,3 kV/cm electric field intensity.

    vilnius Repository record for Žmogaus gcsfr geno klonavimas, transfekcija ir raiška žinduolinėse ląstelėse / (opens in a new tab)

Page 1 of 6