Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 72 for “"Resin Flow"”.
-
Integrating resin flow and stress development in process modeling of thermoset composites
… into two distinct and sequential steps, first of flow-deformation behaviour and then of stress-deformation. In the current processing models, each of these two aspects is dealt with in a separate sub-model, typically called the flow module and stress module respectively. The flow module is …
-
Investigation of VARTM Resin Flow Through 3D Near Net-Shape Aerospace Preforms
… limited worldwide availability. Vacuum Assisted Resin Transfer Moulding (VARTM) is an interesting alternative for the manufacturing of near net-shape components as it reduces the costs related to material storage and removes the need for autoclave cure. The production of parts with complex …
-
Investigation of the Resin Film Infusion Process for Multi-scale Composites Based on the Study of Resin Flow, Void Formation and Carbon Nanotube Distribution
… of nano-particles during processing. The short resin flow lengths enabled by the resin film infusion (RFI) process make this process a prime candidate for the fabrication of multi-scale PMCs. The main objective of this thesis is to validate the possibility of using out-of-autoclave RFI for …
-
Processing of MW-Scale Wind Turbine Rotor Blades by Vacuum-Assisted Resin Infusion Molding
Vacuum-assisted resin infusion molding (VARIM) has been extensively used in large composite-structure manufacturing, such as MW-scale off-shore WTBs, due to its out-of-autoclave curing process and cost effectiveness. The number and location of resin flow inlets and the placement of distribution …
-
Effects of Manufacturing Induced Features on Damage Evolution in Carbon-Fibre Epoxy Composite Laminates
… production techniques, such as high-pressure resin transfer moulding (HP-RTM). The integration of resin flow channels into HP-RTM moulds assists with production of complex parts by reducing total flow resistance, decreasing filling time and guiding the resin through the mould. This research …
-
Ponderosa Pine Mortality and Bark Beetle-Host Dynamics Following Prescribed and Wildland Fires in the Northern Rocky Mountains, USA
… fire in Idaho and one wildland fire in Montana. Resin flow volume (ml) was measured on 145 fire-injured ponderosa pine 2 and 3 years post-fire. Logistic regression was used to construct two predictive ponderosa pine mortality models, and two predictive bark beetle-attack models. Post-fire delayed …
-
Measurement of resin pressure in composite laminates during cure
A promising method of measuring the resin pressure within a composite laminate during processing has been developed. This method can be used to investigate the control of voids, or resin flow and laminate compaction in several composite material processing methods such as ACND, hot press curing and …
-
Processing parameters and chamber length impact on detached die and attached die resin injection pultrusion
… are pull speed, fiber volume fraction, resin viscosity, injection port location and compression ratio. 3-D finite volume technique is used to simulate the liquid resin flow through the fiber reinforcement in the injection pultrusion process. The purpose of the present work is to …
-
Modelling and experimental issues in the processing of composite laminates
Two published resin flow models for the autoclave/vacuum degassing process (AC/VD) have been implemented in a user friendly computer code. One, the sequential compaction flow model (SCM), includes a heat transfer model and the other, the squeezed sponge resin flow model (SSM), has been extended to …
-
Impact of Design Parameters on Detached-Die Tapered Resin Injection Pultrusion
… of the detached-die with the attached-die resin injection chamber configurations. In this work the impact of various geometric design parameters (the length of the injection chamber, slot width, multiple injection slot locations, and part thickness) on the performances and complete wetout …
-
THE IMPACTS OF REMOVING WILDFIRE ON PINUS PONDEROSA RESISTANCE AGAINST DENDROCTONUS PONDEROSAE
… What are the best predictors of ponderosa pine resin flow, a trait related to MPB attack success, and how do these predictors relate to tree growth?; (2) Are predictors of resin flow also predictors of MPB attack success and are they affected by changes to wildfire disturbance regimes?; (3) How …
-
THE IMPACTS OF REMOVING WILDFIRE ON PINUS PONDEROSA RESISTANCE AGAINST DENDROCTONUS PONDEROSAE
… What are the best predictors of ponderosa pine resin flow, a trait related to MPB attack success, and how do these predictors relate to tree growth?; (2) Are predictors of resin flow also predictors of MPB attack success and are they affected by changes to wildfire disturbance regimes?; (3) How …
-
Characterizing the Effects of Capillary Flow During Liquid Composite Molding
… most important factor of LCM is controlling the resin flow throughout the fiber reinforcement during infusion, as incomplete filling of fibers is a major quality issue as it results in dry spots or voids. Void formation occurs at the resin flow front due to competition between viscous forces and …
-
Modeling the pultrusion process to obtain low void fraction composites
… can be reduced. The goal is to promote uniform resin flow through the glass fibers, while the part is still in the die; this is because increasing resin flow in the die should result in fewer voids in the final product.;To achieve this objective, an existing pultrusion process was analyzed by …
-
Characterising the creation of defects in large scale vacuum assisted resin infusions in the marine industry
Utilisation of the Vacuum Assisted Resin Infusion (VARI) process has increased in recent years for the manufacture of large scale components for the transport industry. Quality control and repeatability are two key areas where the VARI process requires greater understanding due to the scale of the …
-
A three-phase integrated flow-stress framework for process modelling of composite materials
… of physical and chemical processes such as flow of resin and gaseous volatiles through the fibre-bed, thermochemical changes, and stress development. These phenomena are usually simulated sequentially in a so-called “integrated sub-model” framework. In the sequential method, (i) mapping of …
Page 1 of 4