Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"Resin formulation"”.

  1. DLP Resin Development for 3D Printing of Silica Photonic Crystal Fiber Preforms

    … technology. DLP preform fabrication involves resin preparation, DLP printing, and thermal treatment, while its performance highly depends on resin formulation. This work studies how to improve resin formulation for better preform quality and resolution. Firstly, we have investigated the DLP …

    unsw Repository record for DLP Resin Development for 3D Printing of Silica Photonic Crystal Fiber Preforms (opens in a new tab)

  2. Polyethylene Glycol Diacrylate (PEGDA) Resin Development for 3D-Printed Microfluidic Devices

    … 3D printer utilizing a custom PEGDA resin formulation tailored for low non-specific protein adsorption based on my colleagues' work [Rogers et al., Anal. Chem. 83, 6418 (2011)]. Horizontal microfluidic channels with designed rectangular cross sectional dimensions as small as 300 um …

    byu Repository record for Polyethylene Glycol Diacrylate (PEGDA) Resin Development for 3D-Printed Microfluidic Devices (opens in a new tab) Download PDF for Polyethylene Glycol Diacrylate (PEGDA) Resin Development for 3D-Printed Microfluidic Devices (opens in a new tab)

  3. Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing

    … the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders. The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in …

    gsu Repository record for Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing (opens in a new tab)

  4. 3D Printing for Microfluidics

    … an optical approach was used to guide custom resin formulation to help create the interconnected hollow regions that form a microfluidic device. This was based on a new a mathematical model to calculate the optical dose delivered throughout a 3D printed part, which also explains the effect of …

    byu Repository record for 3D Printing for Microfluidics (opens in a new tab) Download PDF for 3D Printing for Microfluidics (opens in a new tab)

  5. The influence of material and process parameters on high-energy electron beam curing of polymer composites

    … parameters on curing and material properties. A resin system consisting of a high-temperature epoxy and a cationic photoinitiator is investigated. The material and process parameters of radiant dose, initiator concentration, temperature, dose rate, and reinforcement are analysed for their effect …

    manitoba Repository record for The influence of material and process parameters on high-energy electron beam curing of polymer composites (opens in a new tab)

  6. Toward the 3D printing of bioinspired heterogeneous structures

    … s for AEMA-based and 0.44 s for MA-based resins at 0.05–0.5 mm slice thickness) wereimpractically short. Printing trials confirmed that these estimates were inadequate, as theydid not account for the crosslinking degree required to achieve sufficient mechanical stability.A trial-and-error …

    strathclyde Repository record for Toward the 3D printing of bioinspired heterogeneous structures (opens in a new tab)

  7. Enzyme modified soy flour adhesives

    … and polyamide-epichlorohydrin (PAE) adhesive formulations. In soy/PF blends the degree of hydrolysis (DH) was an integral factor in both strength and durability. DH >18% was detrimental to the internal bond and thickness swell of medium density fiberboard (MDF) specimens with PF blends. MDF …

    iastate Repository record for Enzyme modified soy flour adhesives (opens in a new tab)

  8. Magnetic polymer nanocomposite materials for biomedical applications

    … nanoparticle synthesis, compositing, gel formulation and printing capabilities towards these goals. The first part of the work focused on the synthesis of size controlled NPs, with hydrophilic surface catechol-functional ligands. The nanoparticle surface coverage and effect of the ligands …

    dcu Download PDF for Magnetic polymer nanocomposite materials for biomedical applications (opens in a new tab)

  9. Glass fiber reinforced biorenewable polymer composites and the fabrication with pultrusion process

    … was built for running those experiments. The resin formulation with the optimum percentage of lubricant and clay and pultrusion processing parameters were investigated based on processing performance. MCS silane was used to modify glass fiber with a simple dipping method. The influences of …

    iastate Repository record for Glass fiber reinforced biorenewable polymer composites and the fabrication with pultrusion process (opens in a new tab)

  10. Optimization of Nonadsorptive Polymerized Polyethylene Glycol Diacrylate as a Material for Microfluidics and Sensor Integration

    … stereolithographic 3D printer and a custom PEGDA resin formulation tailored for low non-specific protein adsorption. Horizontal microfluidic channels with designed rectangular cross sectional dimensions as small as 350 µm wide and 250 µm tall are printed with 100% yield, as are cylindrical …

    byu Repository record for Optimization of Nonadsorptive Polymerized Polyethylene Glycol Diacrylate as a Material for Microfluidics and Sensor Integration (opens in a new tab) Download PDF for Optimization of Nonadsorptive Polymerized Polyethylene Glycol Diacrylate as a Material for Microfluidics and Sensor Integration (opens in a new tab)

  11. Spatially defined crystallinity within multimaterial polymeric networks

    … In this regard, the monolithic nature of most resins currently employed through light-driven polymerizations limits the potential for spatial patterning within resin vat polymerizations. To this aim, a novel, majorly two-component resin formulation was developed and optimized using long alkyl …

    texas Repository record for Spatially defined crystallinity within multimaterial polymeric networks (opens in a new tab)

  12. MECHANICALLY ROBUST BIOCOMPATIBLE POLYMERIC NETWORKS FOR REPETITIVE LOADING

    … cyclic deformation, while traditional dental resins lack strong bonding to mineralized tissues and suffer from limited biofunctionality. To address these challenges, this work presents two classes of engineered polymer networks designed for enhanced mechanical robustness and interfacial …

    penn Repository record for MECHANICALLY ROBUST BIOCOMPATIBLE POLYMERIC NETWORKS FOR REPETITIVE LOADING (opens in a new tab)

  13. Thiol-Acrylate Polymerization Kinetics and Applications in Microfluidics

    … properties of a thiol-acrylate microfluidic resin (TAMR) were investigated including the cure kinetics, hydrophilicity, solvent absorption, and elastic modulus. The material was shown to cure at 50 °C in 3 hours or at room temperature in 10 hours. The water contact angle of these materials …

    lsu-thes Repository record for Thiol-Acrylate Polymerization Kinetics and Applications in Microfluidics (opens in a new tab)

  14. Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material

    … epoxy printed circuit board (PCB) impregnating resins arise from the distinct physical compositions and drying characteristics of the polymer solution and the latex emulsion. The presence of residual surfactant from the waterborne epoxy emulsion poses a concern for dielectric performance and …

    vt Repository record for Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material (opens in a new tab)

  15. 3D PRINTING WITH SOUND WAVES: DIRECT SOUND PRINTING (DSP) AND PROXIMAL SOUND PRINTING (PSP)

    … to initiate polymerization deep within resin volumes, enabling the fabrication of complex structures with fine features (down to 280 μm) in materials like polydimethylsiloxane (PDMS) that cannot be printed by conventional methods. DSP was characterized using high-speed imaging, …

    concordia Download PDF for 3D PRINTING WITH SOUND WAVES: DIRECT SOUND PRINTING (DSP) AND PROXIMAL SOUND PRINTING (PSP) (opens in a new tab)

  16. The effect of inhibitor and initiator concentration on degree of conversion, flexural strength and polymerization shrinkage stress on resin-matrix composite

    … of the most significant problems associated with resin-matrix composite. Shrinkage results in contraction stress in the resin, leading to possible debonding in certain areas of the adhesive joint and potentially adversely affecting the bond strength. The reduction in the stress may improve the …

    iupui Repository record for The effect of inhibitor and initiator concentration on degree of conversion, flexural strength and polymerization shrinkage stress on resin-matrix composite (opens in a new tab)

  17. Formulation of uv curable resins utilized in vat photo polymerization for the additive manufacturing of gun propulsion charge in 3d printers

    Formulating resins for Additive Manufacturing (AM), utilizing UV laser stereolithography, is a new technique that makes it possible for the fabrication of complex geometries with high dimensional resolution. This layer by layer photopolymerization approach spans various industrial sectors from …

    njit Repository record for Formulation of uv curable resins utilized in vat photo polymerization for the additive manufacturing of gun propulsion charge in 3d printers (opens in a new tab)

  18. Control of polymer network structure and degradation

    … ultimate transverse strength of nanogel-loaded resin monomer (TEGDMA) does not change compared to neat resin homopolymer as one control material in addition to the homopolymer of PEG2000PLADMA, which includes polylactic acid segments in the crosslinks. The use of a monomer-swollen highly …

    colostate Repository record for Control of polymer network structure and degradation (opens in a new tab)

  19. Realizing Enhanced Toughness in Block Copolymer Modified Brittle Plastics

    … through a model system study with the Jeffamine resin. Two distinct types of diblock copolymers formed spherical micelles in cured bulk epoxies and 15 micrometer thick coatings, but the process of solvent-casting affected the micelle size and distribution in the coating. The toughness enhancement …

    umn Repository record for Realizing Enhanced Toughness in Block Copolymer Modified Brittle Plastics (opens in a new tab)