Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Resin infiltration"”.

  1. Resin Infiltration of Incipient Interproximal Caries: A 6-month Randomized, Controlled Clinical trial

    … area between teeth. Recently treatment with resin polymers to infiltrate enamel and dentin affected by caries has been in-troduced. The infiltration technique arrests the lesion progression by penetrating and sealing the porous lesion, arresting ongoing acidic damage and mechanically restores …

    uab Repository record for Resin Infiltration of Incipient Interproximal Caries: A 6-month Randomized, Controlled Clinical trial (opens in a new tab)

  2. Effectiveness of Resin Infiltration and Mi Paste Cpp-Acp in Masking White Spot Lesions

    … the effectiveness of two treatment modalities, resin infiltration (RI) and Casein Phosphopeptide Amorphous Calcium Phosphate (CPP-ACP), at improving the light reflectivity and thus the appearance of WSLs using spectrophotometric analysis. Sixty extracted human third molars were partially …

    loma-linda Repository record for Effectiveness of Resin Infiltration and Mi Paste Cpp-Acp in Masking White Spot Lesions (opens in a new tab)

  3. Comparison of Bleaching Agent Applied to White Spot Lesions Before or After Resin Infiltration: An In Vitro Study

    … from bleaching white spot lesions (WSLs) before resin infiltration (RI) relative to bleaching WSLs after RI, and to evaluate how these color alterations compare to adjacent areas of bleached sound enamel. Materials & Methods: Artificial WSLs were created on the right side of the facial surfaces …

    buffalo Repository record for Comparison of Bleaching Agent Applied to White Spot Lesions Before or After Resin Infiltration: An In Vitro Study (opens in a new tab)

  4. Comparative evaluation of ICON resin infiltration and Micro-abrasion followed by CPP-ACP application on colour, mineral density and surface roughness of MIH-affected teeth in vitro

    … surface treatment using two protocols; ICON Resin Infiltration (IRF) and Micro-abrasion followed by CPPACP (MCP). Materials and methods 50 extracted human teeth were used in the study, 10 sound enamel [Group 1(SE)] as a control group and 40 MIH enamel; 20 white-creamy [Group 2(IRF) and Group …

    whiterose Download PDF for Comparative evaluation of ICON resin infiltration and Micro-abrasion followed by CPP-ACP application on colour, mineral density and surface roughness of MIH-affected teeth in vitro (opens in a new tab)

  5. Experimental study and analytical approaches to avoid matrix defects during composites manufacturing

    Resin matrix defects are common during the manufacture of composite parts. These defects lead to rework or part rejection which ultimately lead to increased manufacturing cost. This study investigates different sources of such defects, the underlying physics, and proposes several analytical models …

    ubc Repository record for Experimental study and analytical approaches to avoid matrix defects during composites manufacturing (opens in a new tab) Download PDF for Experimental study and analytical approaches to avoid matrix defects during composites manufacturing (opens in a new tab)

  6. Comparisons of esthetic outcomes among treatment modalities for orthodontic-induced white spot lesions: split-mouth randomized clinical trial

    … of white spot carious lesions (WSL) treated with resin infiltration (RI) – ICON®, 5% sodium fluoride (22,600 parts per million (ppm) with fluoride varnish (FV), and to assess the synergistic effect of adding Casein Phosphopeptide-Amorphous Calcium Phosphate- MI Paste® (MIP) to these treatment …

    bu Repository record for Comparisons of esthetic outcomes among treatment modalities for orthodontic-induced white spot lesions: split-mouth randomized clinical trial (opens in a new tab)

  7. Fabrication of polymer infused multiphase glass ceramic block

    … and 3) 900 °C. After sintering, density before resin infiltration of specimens was measured and calculated. All specimens were immersed in silane solution and infused with resin solution then cured under Hydraulic press. Specimens were examined for physical optical and mechanical properties …

    bu Repository record for Fabrication of polymer infused multiphase glass ceramic block (opens in a new tab)

  8. Piezoresistive Hybrid Nanocomposites for Strain and Damage Sensing: Experimental and Numerical Analysis

    … hybrid nanocomposites made of both fillers using resin infiltration techniques and show an improvement of their electromechanical performance when compared to CNT nanocomposites. Due to the limitations of the resin infiltration techniques, the author develops an inkjet printing procedure with a …

    embry-riddle Repository record for Piezoresistive Hybrid Nanocomposites for Strain and Damage Sensing: Experimental and Numerical Analysis (opens in a new tab)

  9. Combined structural and manufacturing optimization of stiffened composite panels

    … the manufacturing analysis, a one-dimensional resin film infusion model is developed to compute the infiltration time of the resin into a fabric preform of the panel. Results are presented showing the effects of structurally important design variables, such as cross-sectional geometry and …

    vt Repository record for Combined structural and manufacturing optimization of stiffened composite panels (opens in a new tab)

  10. Development and verification of a resin film infusion/resin transfer molding simulation model for fabrication of advanced textile composites

    … computer model for the simulation of the resin transfer molding/resin film infusion processing of advanced composite materials. This computer simulation model is designed to provide aircraft structure and tool designers with a method of predicting the infiltration and curing behavior of a …

    vt Repository record for Development and verification of a resin film infusion/resin transfer molding simulation model for fabrication of advanced textile composites (opens in a new tab)

  11. Comparison of Microshear Bond Strength and Morphological Changes Between Active and Passive Application of 4th Generation Etch-and-Rinse Etchant on Enamel

    … between application techniques. Verification of resin infiltration depth with each etchant application has been examined with scanning electron microscopy by mounting the etched and bonded enamel surface of the tooth in epoxy and slicing the tooth longitudinally producing a transverse, depth-wise …

    portland-state Repository record for Comparison of Microshear Bond Strength and Morphological Changes Between Active and Passive Application of 4th Generation Etch-and-Rinse Etchant on Enamel (opens in a new tab)

  12. Analysis of Cyanate Ester Resins and Graphite Fabric for Use in Resin Film Infusion Processing

    … was to characterize two cyanate ester resins and a eight harness satin (8HS) graphite fabric for use in resin film infusion (RFI) processing. Two cyanate ester resin systems were characterized to determine their cure-kinetics, and viscosities during cure. A 8HS graphite fabric was …

    vt Repository record for Analysis of Cyanate Ester Resins and Graphite Fabric for Use in Resin Film Infusion Processing (opens in a new tab)

  13. An investigation of defect evolution in foam core sandwich structures produced using vacuum assisted resin transfer moulding

    In this work, a resin infusion process used by Flight Dynamics Corp. was investigated for the fabrication of low-cost composite sandwich structures. Trials were performed to establish a complete set of potential defects that could develop during the manufacture of E-glass epoxy vinyl ester sandwich …

    ottawa-retro Repository record for An investigation of defect evolution in foam core sandwich structures produced using vacuum assisted resin transfer moulding (opens in a new tab)

  14. Vacuum Assisted Resin Transfer Molding (VARTM): Model Development and Verification

    … investigation, a comprehensive Vacuum Assisted Resin Transfer Molding (VARTM) process simulation model was developed and verified. The model incorporates resin flow through the preform, compaction and relaxation of the preform, and viscosity and cure kinetics of the resin. The computer model can …

    vt Repository record for Vacuum Assisted Resin Transfer Molding (VARTM): Model Development and Verification (opens in a new tab)

  15. Procerum root disease physiology and disease interactions with ozone

    … apical growth resemble those of water stress. Resin infiltration of the xylem at the stem base may be responsible for vascular occlusion leading to severe water deficits and mortality. The pathogen has been isolated from the roots of ozone-sensitive eastern white pines in the field, although …

    vt Repository record for Procerum root disease physiology and disease interactions with ozone (opens in a new tab)

  16. Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification

    Vacuum assisted resin transfer molding (VARTM) is a low cost resin infusion process being developed for the manufacture of composite structures. VARTM is being evaluated for the manufacture of primary aircraft structures, including foam sandwich composite materials. One of the benefits of VARTM is …

    vt Repository record for Vacuum Assisted Resin Transfer Molding of Foam Sandwich Composite Materials: Process Development and Model Verification (opens in a new tab)

  17. Void evolution during processing of out-of-autoclave prepreg laminates

    … that gas transport, fiber bed compaction and resin infiltration govern void evolution during the process. Porosity is governed by multiple chemical and transport phenomena, among which gas transport through vacuum evacuation plays a crucial role. An understanding of gas transport in OOA …

    ubc Repository record for Void evolution during processing of out-of-autoclave prepreg laminates (opens in a new tab) Download PDF for Void evolution during processing of out-of-autoclave prepreg laminates (opens in a new tab)

  18. Interventions for orthodontically induced white spot lesions: a systematic review and meta-analysis

    … fluoride films, gels, mouthrinses or varnishes, resin infiltration, miswak chewing sticks, bioactive glass toothpastse, or to no adjunct treatment (i.e. conventional oral hygiene). The monthly use of fluoride varnish was the best supplement to improve WSLs in terms of lesion area (1 trial; MD = …

    zurich Restricted access

  19. Injection repair of advanced aircraft composites with a high temperature cyanate ester resin

    … that involves injecting a low viscosity resin into the damaged area and subjecting the composite to heat to cure the resin. Currently, injection repairs are rarely used in high temperature applications because of the lack of resins with both low viscosity and high thermal stability. …

    iastate Repository record for Injection repair of advanced aircraft composites with a high temperature cyanate ester resin (opens in a new tab)

Page 1 of 2