Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Resistance Temperature Detector"”.

  1. Development of a circuit that linearizes the response of a Platinum Resistance Temperature Detector

    … that linearizes the response of a Platinum Resistance Temperature Detector, commonly referred to as RTD.</p> <p>The function of the RTD Processor is to accurately measure temperature in any resistance thermometry application which uses the RTD as a temperature transducer. The characteristic …

    ut-knoxville Repository record for Development of a circuit that linearizes the response of a Platinum Resistance Temperature Detector (opens in a new tab)

  2. Nuclear Thermal Rocket Engine Instrumentation Addressing Environmental Limitations on Temperature Measurements

    … and indicates a critical need for high temperature measurement technology that can survive extreme environmental conditions. Through a survey of the current state-of-the-art of temperature measurement technology indicates that are still several gaps between high technology readiness …

    utk-theses Repository record for Nuclear Thermal Rocket Engine Instrumentation Addressing Environmental Limitations on Temperature Measurements (opens in a new tab)

  3. SAW Correlator Temperature Compensation Using a Pulse Width Modulated Temperature Controller

    … built on a Lithium Niobate substrate is temperature compensated in order to maintain a constant center frequency. Frequency shifts as a result of temperature variations limit device performance. An Arduino®-based PWM temperature controller is developed to read the device temperature from …

    ucf Repository record for SAW Correlator Temperature Compensation Using a Pulse Width Modulated Temperature Controller (opens in a new tab)

  4. Quick-fabrication epidermal electronic heater with on-site temperature feedback control

    … time to produce. Also, they all lack sufficient temperature feedback control, which is necessary to accommodate the dynamic temperatures of the human epidermis and prevent burning. We present a cost-effective epidermal electronic heater that can be produced by the cut-and-paste method and has …

    texas Repository record for Quick-fabrication epidermal electronic heater with on-site temperature feedback control (opens in a new tab)

  5. Resistance thermometer characteristics and response time testing

    … which enables the time constant of a platinum resistance temperature detector (PRTD) to be calculated in situ. Application of this method (called the loop current step response (LCSR) method) yielded errors in the time constant calculation of over 20 percent. Further analytical and numerical …

    ut-knoxville Repository record for Resistance thermometer characteristics and response time testing (opens in a new tab)

  6. Fabrication and characterization of heat flux sensor using polymer derived ceramics

    In this study, a free standing Resistance Temperature Detector (RTD) sensor made from Polymer Derived Ceramics (PDCs) for high temperature application (above 1000[degrees]C) is fabricated. A newly developed fabrication method to polymerize the precursor into RTD patterns is employed, which is …

    missouri Repository record for Fabrication and characterization of heat flux sensor using polymer derived ceramics (opens in a new tab)

  7. Application of thin film PRTD's for the monitoring of cutting tool temperature during turning

    … of the cutting tool failure modes are cutting temperature-dependent. One of the cutting parameters to be monitored is the cutting temperature. On-line cutting tool temperature monitoring has been addressed with a variety of techniques, from work-tool thermocouples to embedded thermocouples to …

    vt Repository record for Application of thin film PRTD's for the monitoring of cutting tool temperature during turning (opens in a new tab)

  8. Exploration of interferometry for measuring temperature in experimental fluid mechanics

    … interferometry to sample line-of-sight-averaged temperature in water via two experimental setups: slow-varying temperature in static fluid and fast temperature variations in convective flow. The fast response time and high precision of the measurements obtained (a few mK) is enabled by the high …

    soton Download PDF for Exploration of interferometry for measuring temperature in experimental fluid mechanics (opens in a new tab)

  9. Investigation into the Hydrogen Gas Sensing Mechanism of 3C-SiC Resistive Gas Sensors

    … the sensor to the gas, producing a change in the temperature of the device when the heat transfer characteristics of the gas change, termed the thermal detection mechanism. The heat transfer characteristics of the gas are dependent on the thermal conductivity of the gas, a property which is a …

    usf Repository record for Investigation into the Hydrogen Gas Sensing Mechanism of 3C-SiC Resistive Gas Sensors (opens in a new tab)

  10. Thermal Characterization of Liquid Samples with Three-Dimensional On-Chip Micro Calorimeter

    … of a reaction chamber, a nickel heater, and a resistance temperature detector (RTD) sensor. The reaction chamber enables analysis of 200 nl liquid samples. Also, its enclosed structure prevents liquid sample evaporation during an experiment. The heater and the sensor are integrated on the top …

    marquette Repository record for Thermal Characterization of Liquid Samples with Three-Dimensional On-Chip Micro Calorimeter (opens in a new tab)

  11. Thermoregulatory controller function : modeling and manipulation

    … of a model of the interdependency of core temperature and the primary thermoregulatory effector mechanism, glabrous skin blood flow (GSBF), is described. Prior to conducting the research, the need for a conformable, two-dimensional skin temperature sensor was realized. The design, …

    texas Repository record for Thermoregulatory controller function : modeling and manipulation (opens in a new tab)

  12. MEMS pressure, temperature and conductivity sensors for high temperature and harsh environments

    … objective of this thesis is to develop miniature temperature, pressure, and liquid conductivity sensors for use in autonomous flow-following SmartChips to measure kraft process variables within the digester during their passage through the process. Combined capacitive pressure and temperature …

    ubc Repository record for MEMS pressure, temperature and conductivity sensors for high temperature and harsh environments (opens in a new tab) Download PDF for MEMS pressure, temperature and conductivity sensors for high temperature and harsh environments (opens in a new tab)

  13. Fabrication and testing of a tool for thermodynamic characterization of micro-samples

    … REQUEST.] Cryopreservation utilizes very low temperatures to preserve living cells and tissues. Successfully cryopreservation protocols for a limited number of cell types have been developed experimentally. To develop generalized protocols an accurate measurement of thermodynamic properties …

    missouri Repository record for Fabrication and testing of a tool for thermodynamic characterization of micro-samples (opens in a new tab)

  14. Development of a UV Nanosecond Laser Process for Polyamide Coating Removal from Micro-Scale Platinum Wires

    … wires used in the production of high-sensitivity Resistance Temperature Detector (RTD) sensors. The UV laser system operates at a wavelength of 355 nm with a 20 µm spot size, a repetition rate ranging from 20 to 200 kHz, and an average power of 3 watts. The UV enables removal of the polyamide …

    concordia Download PDF for Development of a UV Nanosecond Laser Process for Polyamide Coating Removal from Micro-Scale Platinum Wires (opens in a new tab)

  15. Design and Operation of a Microwave Flow Cytometer for Single Cell Detection and Identification

    … a cell cannot be detected. Lastly, a microwave resistance temperature detector (RTD) is designed, and a model is developed to extract the temperature and complex permittivity of liquids in a microfluidic channel. The microwave RTD is capable of measuring temperature to within 0.1°C. The design …

    clemson Repository record for Design and Operation of a Microwave Flow Cytometer for Single Cell Detection and Identification (opens in a new tab)

  16. Termočlánkový snímač teploty (TST)

    Práce poskytuje ve své první částí ucelený přehled zabývající se měření teploty termočlánkovým snímačem a s ním spojenou problematikou. Dále jsou uvedeny základní informace o činnosti Peltierova článku a principu kovových odporových snímačů teploty. Jednou z hlavních částí je návrh a realizace …

    brno-tech Repository record for Termočlánkový snímač teploty (TST) (opens in a new tab)

  17. Development of a novel methodology for the determination of the total solar energy transmittance of Building-Integrated Photovoltaic window technologies using outdoor measurements

    … (for direct incident measurements), several Resistance Temperature Detector (RTD) sensors and infrared cameras (for surface temperature measurements), allowing the determination of TSET (and its angular dependency) based on a series of instantaneous outdoor measurements under sunny conditions …

    waterloo Repository record for Development of a novel methodology for the determination of the total solar energy transmittance of Building-Integrated Photovoltaic window technologies using outdoor measurements (opens in a new tab)

  18. Development and testing of a diamond calorimeter heat transfer gauge

    … steel housing, with a platinum thin-film resistance temperature detector sputtered on the rear surface of the diamond to measure its temperature rise. An analysis of the gauge as a calorimeter showed that the rise-time of the four types of DHTG are 2.4 µs, 11.6 µs, 36.3 µs, and 54.4 µs …

    oxford Repository record for Development and testing of a diamond calorimeter heat transfer gauge (opens in a new tab)

  19. Měření teplot v rotoru elektrického stroje

    … elektrického stroje. První kapitola této práce – Resistance temperature detectors přibližuje problematiku použití odporových senzorů teploty, jejich normy, tolerance a měřicí obvody, které slouží pro měření odporu, respektive teploty. Druhá kapitola – SPI vysvětluje základy symetrické sériové …

    brno-tech Repository record for Měření teplot v rotoru elektrického stroje (opens in a new tab)

  20. Temperature Programming of the Second Dimension in Comprehensive Two-Dimensional Gas Chromatography (GC×GC)

    … development, testing, and application of a ²D temperature programming system for GC×GC to overcome this problem. Every stage of development for the ²D temperature programming system is described, from the proof-of-concept to the final design. The proof-of-concept system in Chapter 2 focused on …

    waterloo Repository record for Temperature Programming of the Second Dimension in Comprehensive Two-Dimensional Gas Chromatography (GC×GC) (opens in a new tab)

Page 1 of 2