Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"Resistive - type"”.
-
Inkjet printing of resistive-type humidity sensor for harsh environments
A flexible resistive-type humidity sensor for harsh environments is successfully designed and fabricated by an inkjet printing method using a Dimatix materials printer (DMP-2800 series from Fujifilm). Construction of the sensors is based on inkjet printed interdigitated silver electrodes on a …
-
Elaboration and characterization of humidity sensors for environmental monitoring
… in the bulk. The resistance or impedance of the resistive-type sensor decreases as the relative humidity (RH)increases. Ions or electrons, or both of them, are the conduction carriers for resistive-type humidity sensors. The common construction of the resistive-type ceramic humidity sensors …
-
Porosity and Surface Functional Effects in Carbon Nanofiber Sensors for the Detection of Nitrogen Dioxide
… carbon nanofibers (CNFs) were used as a resistive type gas sensor to detect the adsorption of NO₂ gas. In an attempt to enhance the sensitivity CNFs to NO₂ for use in non-destructive leak testing, mesoporous structures were induced within the CNFs in order to increase the specific surface …
-
Superfícies seletivas em frequência do tipo absorve/transmite banda larga
… due to the numerous advantages presented by this type of structure, among them the low cost, ease of fabrication and low profile. As well as frequency selective surfaces, electromagnetic wave absorbers have also been widely used, mainly with the objective of solving the problem of multipath. …
-
Point Loma reballast stability study
… 1:24, 1:28.8, and 1:33.6 to examine median prototype armor stone diameters of 20 inches, 24 inches and 28 inches. The 1:33.6 scale model was tested only at the 1:33.6 Froude scaling. Both monochromatic and random wave conditions were modeled at prototype periods between 12 and 20 seconds. The …
-
Nano-derived sensors for high-temperature sensing of H2, SO2 and H2S
… of nanomaterials as the sensing material within resistive-type chemical sensor platforms increase sensitivity. Unfortunately, nanomaterials are not stable at high temperatures due to sintering and coarsening processes that are driven by their high surface to volume ratio. Therefore, new hydrogen …
-
Performance evaluation of duct-mounted relative humidity sensors used in building HVAC applications
… building HVAC systems, namely the capacitive and resistive types. Sensor models from six different manufacturers were used for testing. Three sensors of each model for a total of 18 sensors were tested, nine of them were capacitive-type sensors and nine were resistive-type sensors. The performance …
-
Greenhouse Gas Detection Using Metal Oxides: Experiments and Challenges
… purpose, B-site substituted ordered perovskite-type MIECs Ba2(Ca0.66Nb1.34-xFex)O6-δ (x = 0, 0.34, 0.66, 1) (BCNF) and B-site disordered MIECs Ba(Mg0.33Nb0.67-xFex)O3-δ (x = 0, 0.17, 0.33, 0.50) (BMNF) were successfully synthesized by conventional solid state method in air at 1400 °C. …
-
DEVELOPMENT OF TEMPERATURE AND FLOW SENSORS FOR MICROFLUIDIC APPLICATIONS
… arrangement respectively.</p> <p>A meandering resistive type micro heater was developed. The power consumption for the 400 Å thick gold micro heaters on the silicon oxide and on the glass substrates was compared. The power required for the glass substrate was 46mW, 112mW and l60mW for 5V, 8V, …
-
DEVELOPMENT OF FUNCTIONAL NANOCOMPOSITE MATERIALS TOWARDS BIODEGRADABLE SOFT ROBOTICS AND FLEXIBLE ELECTRONICS
… flexible electronics as well as bidirectional resistive-type strain sensors. The results obtained in this work can be regarded as a preliminary study towards the realization of full natural-derived and biodegradable soft robotic and electronic systems and devices.