Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"Response History Analysis"”.

  1. Nonlinear modeling of Texas highway bridges for seismic response-history analysis

    … to develop bridge numerical models for nonlinear response-history analysis taking into consideration Texas-specific design and detailing practices. Using the models developed, the fragility of Texas bridges can be analyzed and systematically quantified, allowing state highway officials to …

    texas Repository record for Nonlinear modeling of Texas highway bridges for seismic response-history analysis (opens in a new tab)

  2. Development of a Comprehensive Linear Response History Analysis Procedure for Seismic Load Analysis

    … the parameters required to perform linear response history analysis according to Chapter 16 of the American Standard ASCE 7-10. A careful analysis is presented about the selection of ground motions using real records and using artificial records generated such that their response spectrum …

    vt Repository record for Development of a Comprehensive Linear Response History Analysis Procedure for Seismic Load Analysis (opens in a new tab)

  3. Rational Procedure for Damage Based Serviceability Design of Steel Buildings Under Wind Loads and a Simple Linear Response History Procedure for Building Codes

    … buildings and the development of a simple linear response history analysis for building codes. In the United States the building codes are generally silent on the issue of serviceability. This has led to a wide variation in design practices related to service level wind loads. Chapter 2 of this …

    vt Repository record for Rational Procedure for Damage Based Serviceability Design of Steel Buildings Under Wind Loads and a Simple Linear Response History Procedure for Building Codes (opens in a new tab)

  4. Sensitivity of Seismic Response of a 12 Story Reinforced Concrete Building to Varying Material Properties

    … by code specification, affect the seismic response of a twelve- story reinforced concrete building. This study incorporates the pushover and response history analysis to examine how varying steel yield strength (Fy), 28 day nominal compressive concrete strength (f’c), modes, and ground …

    calpoly Repository record for Sensitivity of Seismic Response of a 12 Story Reinforced Concrete Building to Varying Material Properties (opens in a new tab)

  5. Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading

    … of this study was to investigate the hysteretic response of reinforced-concrete (R/C) structural walls that are susceptible to shear failure after flexural yielding. The investigation was divided into an experimental and an analytical phase. There were three main objectives in the experimental …

    uiuc Repository record for Experimental investigation of the response of reinforced concrete structural walls subjected to static and dynamic loading (opens in a new tab)

  6. Seismic Response of a Highway Bridge with Structural Fuses for Seismic Protection of Piers

    … protect the pier columns and limit their response to the linear elastic range. The strategy was applicable to bridges with dropped bent cap, and integral and semi-integral abutments. In this study, the influence of the structural fuses on the seismic response of a representative 3-span …

    unr Repository record for Seismic Response of a Highway Bridge with Structural Fuses for Seismic Protection of Piers (opens in a new tab)

  7. Selection and Scaling of Ground Motions for Generating In-Structure Floor Spectra in Nuclear Power Plants

    Response-history analysis has become a widely used tool for design and performance assessment of structures, systems and components. Prior to such analysis, an engineer is required to select and scale earthquake ground motions for input to a numerical model. Nowadays, best practice is to select and …

    buffalo Repository record for Selection and Scaling of Ground Motions for Generating In-Structure Floor Spectra in Nuclear Power Plants (opens in a new tab)

  8. A Dynamic Analysis of an Explosion Driven Hydrodynamic Conical Distributed Breach Shock Tube

    … of the new distributed breach design. A dynamic response history analysis has also been performed in order to predict the response of the structure to loads characteristic of an ideal shock wave as it propagates along the tube axis. From these efforts some insight has been gained into the …

    ucf Repository record for A Dynamic Analysis of an Explosion Driven Hydrodynamic Conical Distributed Breach Shock Tube (opens in a new tab)

  9. Estimations of building response to stationary and nonstationary winds with consideration of inelastic and aeroelastic effects

    This research deals with the analysis of tall building response under stationary and nonstationary wind considering inelastic and aeroelastic effects and base-isolated tall building response under strong wind. The closed-form solutions of stochastic response statistics including standard deviation, …

    ttu Repository record for Estimations of building response to stationary and nonstationary winds with consideration of inelastic and aeroelastic effects (opens in a new tab)

  10. Relative Performance Comparison and Loss Estimation of Seismically Isolated and Fixed-Based Buildings Using PBEE Approach

    … comparison of the two systems. Based on response history analysis to a suite of motions, constant ductility spectra are generated for fixed-base and isolated buildings in chapter three. Both superstructure force (base shear) and deformation demands in base-isolated buildings are lower …

    utahstate Repository record for Relative Performance Comparison and Loss Estimation of Seismically Isolated and Fixed-Based Buildings Using PBEE Approach (opens in a new tab)

  11. Seismic drift demands of reinforced concrete buildings

    … for an existing general purpose dynamic analysis software. The second phase involved the design of selected buildings. The third and final phase consisted of dynamic inelastic response history analysis of buildings under code compatible earthquake records. A large number of artificially …

    ottawa-retro Repository record for Seismic drift demands of reinforced concrete buildings (opens in a new tab)

  12. Estimating seismic performance of friction damped braced frames by pushover analysis

    … [Chopra and Goel, 2001], the Modal Pushover Analysis (MPA) procedure was demonstrated to be accurate enough in estimating floor displacements and story drifts, and identifying locations of most plastic hinges for Moment Resistant Frame (MRF) systems. The principal objective of this …

    concordia Download PDF for Estimating seismic performance of friction damped braced frames by pushover analysis (opens in a new tab)

  13. Finite Element Modeling for Prediction of Low Frequency Floor Vibrations Due to Walking

    … apply to atypical floor framing. Finite element analysis is a logical choice for predicting vibration response to walking, but simplified designer-friendly procedures are not available. Three relatively simple, experimentally verified methods of predicting low frequency floor vibration due to …

    vt Repository record for Finite Element Modeling for Prediction of Low Frequency Floor Vibrations Due to Walking (opens in a new tab)

  14. Bridge Design for Earthquake Fault Crossings – Synthesis of Design Issues and Strategies

    … fault-rupture zones, i.e., the fault-rupture response spectrum analysis (FR-RSA) procedure and the fault-rupture linear static analysis (FR-LSA) procedure, were considered in this investigation. These two procedures estimate the seismic demands by superposing the peak values of quasi-static …

    calpoly Repository record for Bridge Design for Earthquake Fault Crossings – Synthesis of Design Issues and Strategies (opens in a new tab)

  15. Predicted Inelastic Response of Conventional and Ductile Steel Concentrically Braced Frame Buildings Under Wind Loads

    The inelastic response of three-story steel concentrically braced frame buildings under wind loads was simulated to determine the applicability of ductile braced frame design to wind load applications. This study examined three types of steel concentrically braced frames: a conventional braced …

    byu Repository record for Predicted Inelastic Response of Conventional and Ductile Steel Concentrically Braced Frame Buildings Under Wind Loads (opens in a new tab) Download PDF for Predicted Inelastic Response of Conventional and Ductile Steel Concentrically Braced Frame Buildings Under Wind Loads (opens in a new tab)

  16. Mathematical Formulation of Tools for Assessment of Fragility and Vulnerability of Damaged Buildings

    … finite element-based structural system dynamic response analysis and reliability assessment. The Enhanced Uncoupled Modal Response History Analysis (EUMRHA) procedure developed herein is an efficient response analysis procedure to make the analysis of dynamic structural response to earthquakes …

    gatech Repository record for Mathematical Formulation of Tools for Assessment of Fragility and Vulnerability of Damaged Buildings (opens in a new tab)

  17. Deformation Demands and Collapse Performance of Seismically Detailed Concentrically Braced Frames

    … Buildings. To justify these limits, system-level analysis of SCBFs and OCBFs during high seismic events is needed. This study uses nonlinear response-history analysis to evaluate the deformation demands and collapse performance of these systems using square hollow-structural-section braces. Study …

    marquette Repository record for Deformation Demands and Collapse Performance of Seismically Detailed Concentrically Braced Frames (opens in a new tab)

  18. Numerical Modelling of Unreinforced Masonry Infill Walls under Seismic Load Considering In-Plane / Out-Of-Plane Interaction

    … infill walls play a major role in the seismic response of structures. Although their effect may be beneficial in some situations, the walls are also susceptible to high levels of damage, including collapse that can be life-threatening because of the heavy debris. Despite the critical importance …

    trento Repository record for Numerical Modelling of Unreinforced Masonry Infill Walls under Seismic Load Considering In-Plane / Out-Of-Plane Interaction (opens in a new tab)

  19. Effect of Multi-Component Excitation on the Sliding Response of Unanchored Components in Nuclear Facilities

    … studies on sliding have largely focused on the response due to unidirectional excitation, as computing the response of unanchored components in three dimensions can be complex and computationally expensive. As such, several prediction equations and a standardized approximate method as outlined …

    mcmaster Repository record for Effect of Multi-Component Excitation on the Sliding Response of Unanchored Components in Nuclear Facilities (opens in a new tab)

  20. Evaluating post-earthquake functionality and surge capacity of hospital emergency departments using discrete event simulation

    … based on anticipated functionality. Nonlinear response history analysis of the hospital building was performed using simplified structural models, and the structural and nonstructural component damage was estimated based on FEMA P-58. Expected damage was linked to the post-earthquake …

    ubc Repository record for Evaluating post-earthquake functionality and surge capacity of hospital emergency departments using discrete event simulation (opens in a new tab) Download PDF for Evaluating post-earthquake functionality and surge capacity of hospital emergency departments using discrete event simulation (opens in a new tab)

Page 1 of 3