Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 155 for “"Retained austenite"”.
-
Some factors affecting retained austenite in alloy steels
Thesis (M.S.)--Michigan State College of Agriclture and Applied Science. Dept. of Chemical and Metallurgical Enineering, 1947
-
Hole expansion of retained austenite containing CMnSi bainitic/martensitic steels
… °C for 10-300 s. Significant fractions of retained austenite with differing morphologies, namely blocky retained austenite following austempering and fine film-like austenite following one-step Q&P were observed with X ray diffraction, Magnetic Saturation, Secondary Electron Imaging, and …
-
The role of retained austenite and residual stresses in rolling contact
… roller bearings as used in the rail industry. Retained austenite, residual stress, texture and particle size at the roller surface were measured using X-ray diffraction technique. These parameters along with hardness and microstructure were also studied as a function of load-miles on new …
-
Measurement of retained austenite transformation & work hardening rate in multiaxially deformed AHSS
… describes efforts to characterize both the austenite fraction under different deformation modes and directly measure the stress state and work hardening rate for multiaxially deformed AHSS. Several methods to characterize the austenite fraction in steels of varying initial volume fraction …
-
Characterization of the Factors Influencing Retained Austenite Transformation in Q&P Steels
… Induced Plasticity (TRIP) effect, in which retained austenite (RA) grains transform to martensite during plastic deformation, providing extra ductility via the transformation event. Understanding the factors involved in RA transformation, such as local strain and grain attributes, is …
-
Microstructural effects on the stability of retained austenite in transformation induced plasticity steels
… have both high strength and high ductility. Retained austenite in the microstructure, upon straining, transforms to martensite and this absorbs energy and improves the work hardening of the steel, giving improved elongation. The transformation can be either stress-assisted or strain-induced …
-
Role of retained austenite in the hydrogen management of high strength steel welds, The
Includes bibliographical references (pages 132-137).
-
Effect of retained austenite transformation on the fatigue behaviour of aluminum containing TRIP steels
… accompanied by cyclic plastic strains assisting retained austenite transformation. Despite the existing research attempts there is still insufficient experimental evidence on the influence of transformation on the mechanical behaviour, specifically under elastic and plastic cyclic strains. In the …
-
Effects of silicon and retained austenite on direct-cooled microalloyed forging steels with bainitic structures
Includes bibliographical references (pages 125-131).
-
Investigating the effect of retained austenite on wear and fatigue behavior of AISI 8620 steel
… such as hardness, residual stress, amount of retained austenite (RA), microstructure, grain size, grain orientation etc. can be varied. While the effect of hardness and residual stress on the resulting tribological properties of the steel is well known, the effect of RA is not as clearly …
-
Effect of Microstructure on Retained Austenite Stability and Tensile Behaviour in an Aluminum-Alloyed TRIP Steel
… The TRIP effect involves a metastable phase, retained austenite (RA), transforming into martensite as a result of applied stress or strain. This transformation absorbs energy and improves the work hardening rate of the steel, delaying the onset of necking. This work describes two distinct TRIP …
-
Effect of nickel and retained austenite on rolling sliding contact fatigue resistance in carburized steels, The
… the influence of nickel (Ni) content and retained austenite (RA) on rolling-sliding contact fatigue (RSCF) life in carburized steel. In order to evaluate Ni and retained austenite effects, this study utilizes carburized steel specimens of 4120 (0.13 wt pct Ni, 15.2 vol pct RA), 4820 (3.38 …
-
Reducing the effects of texture on phase fraction measurement of retained austenite using x-ray diffraction
… for more accurate phase fraction measurements of retained austenite (RA) using X-ray diffraction (XRD) has been developed and tested. RA presence improves formability, ductility, and dynamic strengthening in steel products. These properties are tied to the amount of austenite present in the …
-
The effect of rolling contact loading on the texture of retained austenite in tapered roller bearings
… consists of a mixture of tempered martensite and retained austenite. The amount of retained austenite has been the subject of much debate for many years. Retained austenite in steel is a metastable phase that has the ability to transform to martensite under the proper conditions. The …
-
Influence of microstructure and retained austenite on the abrasive wear performance of bainitic 9260 and 6150 steels
The influence of retained austenite content and morphology on the abrasive wear resistance of 9260 and 6150 bainitic steels was evaluated. Two carbide free bainitic (CFB) microstructures were developed with the 9260 alloy to achieve differences in retained austenite content and morphology. These …
-
Retained Austenite Transformation Kinetics in Third Generation Advanced High Strength Steels as a Function of Strain Path
… is to determine the strain path dependance of retained austenite (RA) transformation kinetics in an Fe-0.2C-6.4Mn-1.5Si-1.0Al-0.5Cr (wt.%) medium- Mn third generation advanced high strength steel (3G AHSS). A combination of macro- and micro-scale strain paths including uniaxial tension, plane …
-
Microstructural changes during simulated service of case carburized tapered roller bearings with different initial retained austenite profiles
… were analyzed as a function of both initial retained austenite profile and simulated service mileage (rolling contact revolutions). This analysis examined the microstructural changes produced in these layers by examining the retained austenite content, residual stress, texture, diffracting …
-
The Effect of Phase Morphology and Volume Fraction of Retained Austenite on the Formability of Transformation Induced Plasticity Steels
… due mainly to the presence of meta-stable retained austenite which transforms to martensite under loading, locally hardening the steel. The volume fraction and mechanical stability of the retained austenite play an important role in producing the high formabilities of TRIP steels. In this …
-
Effect of prior warm rolling on the retained austenite content and hardening response of (VIM-VAR)--AISI M-50 steel
… by measurement of the volume fraction of retained austenite in the as-hardened microstructure, retained austenite being a function of the amount of carbides taken into solution during austenitization. It was found that the standard austenitizing temperature of 110 degrees C used to harden …
-
Investigating the effect of retained austenite and residual stress on rolling contact fatigue of carburized steel with XFEM and experimental approaches
<p>In this study, the effects of retained austenite (RA) and residual stress on rolling contact fatigue (RCF) of carburized AISI 8620 steel were investigated through modeling and experiments. In modeling, a two-dimensional finite element RCF model was developed to examine the crack propagation and …
Page 1 of 8