Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Retrofit analysis"”.

  1. Vision-based building energy diagnostics and retrofit analysis using 3D thermography and Building Information Modeling

    … cost. In this sense, energy diagnostics and retrofit analysis for existing building envelopes are key enablers for improving energy efficiency. Since proper retrofit decisions of existing buildings directly translate into energy cost saving in the future, building practitioners are …

    uiuc Repository record for Vision-based building energy diagnostics and retrofit analysis using 3D thermography and Building Information Modeling (opens in a new tab)

  2. A Methodology for Regional Seismic Damage Assessment and Retrofit Planning for Existing Buildings

    … make decision on implementing regional seismic retrofit programs. This research develops a model to estimate regional earthquake losses for existing buildings, and determine optimal retrofit priorities and budgets. Fragility curves are developed to provide earthquake damage estimates for a range …

    portland-state Repository record for A Methodology for Regional Seismic Damage Assessment and Retrofit Planning for Existing Buildings (opens in a new tab)

  3. Bayesian calibration of building energy models for energy retrofit decision-making under uncertainty

    Retrofitting of existing buildings is essential to reach reduction targets in energy consumption and greenhouse gas emission. In the current practice of a retrofit decision process, professionals perform energy audits, and construct dynamic simulation models to benchmark the performance of existing …

    gatech Repository record for Bayesian calibration of building energy models for energy retrofit decision-making under uncertainty (opens in a new tab)

  4. Balancing Trade-Offs Between Deep Energy Retrofits and Heritage Conservation

    … decision framework is presented for deep energy retrofit analyses that balances trade-offs between conservation and sustainability of a building's components. An historic house in Ottawa, Canada was studied to demonstrate the use of the methodology. The energy retrofit analysis suggests 71% …

    carleton Repository record for Balancing Trade-Offs Between Deep Energy Retrofits and Heritage Conservation (opens in a new tab)

  5. An occupant-centric assessment of the building performance gap in low utilisation, higher education facilities

    … this is a helpful philosophy for design and retrofit analysis, it is not entirely accommodating of operational building energy demand. An optimistic amendment would suggest that it is the needs of people that consume energy rather than buildings, for nondomestic buildings at least. However, …

    strathclyde Repository record for An occupant-centric assessment of the building performance gap in low utilisation, higher education facilities (opens in a new tab)

  6. Renewable energy and conservation measures for non-residential buildings

    … and identifying economically feasible building retrofit solutions to decrease the need for fossil fuels so as to mitigate their environmental and societal impacts has become imperative. Two approaches are available for identifying feasible retrofit solutions: 1) the implementation of energy …

    msu

  7. A Machine Learning Workflow for Localized Weather Integration in Building Energy Modeling

    … The east-west WWR reduction and envelope retrofits produce nearly identical savings across all scenarios, because their effects depend on geometry and conduction physics rather than on local temperature. A retrofit analysis based on TMY3 alone would miss these differences and treat every …

    gatech Repository record for A Machine Learning Workflow for Localized Weather Integration in Building Energy Modeling (opens in a new tab)

  8. Analytical and Experimental Investigation for Distortion-Induced Fatigue in Steel Bridges

    … fatigue has been extensively studied; however, retrofit techniques currently used are expensive and/or time consuming to implement. These retrofit techniques primarily fall into two categories--stiffening or softening the weak web-gap region. The University of Kansas has developed an innovative …

    ku Repository record for Analytical and Experimental Investigation for Distortion-Induced Fatigue in Steel Bridges (opens in a new tab)

  9. Predicting cooling loads in hot and humid climates using machine-learning approaches

    … be useful for optimizing building energy use and retrofit analysis at the apartment level. This study aims to develop building- and apartment-level meta-models using machine learning approaches to predict the cooling load. Four machine-learning approaches are applied: multiple linear regression, …

    concordia Download PDF for Predicting cooling loads in hot and humid climates using machine-learning approaches (opens in a new tab)

  10. Modal Updating Cognitive Systems: Behavioral Selection

    … from numerical simulations, especially during retrofit where numerical modeling is most of the time required. However, numerical idealizations of existing structural systems do not match the actual structure. Several authors acknowledge that the reason behind this mismatch between the behavior …

    south-carolina Repository record for Modal Updating Cognitive Systems: Behavioral Selection (opens in a new tab)

  11. Rapid Workflow for Energy Model Calibration, Retrofit Optimization, and Uncertainty Analysis of Large Building Energy Retrofits

    … building's materials properties over time, the retrofit of existing buildings can play a crucial role in achieving these goals. Moreover, determining a cost-effective strategy for reducing GHG emissions is necessary. Due to budget and time limitations, determining the optimal retrofit and …

    carleton Repository record for Rapid Workflow for Energy Model Calibration, Retrofit Optimization, and Uncertainty Analysis of Large Building Energy Retrofits (opens in a new tab)

  12. Opportunities for improved heat integration in average Scandinavian kraftliner mills: A pinch analysis of a model mill

    … tool to find steam saving opportunities is pinch analysis. The method is used in this thesis where a pinch analysis of a modelled average Scandinavian Kraftliner mill has been done. The mill is modelled within the national research program FRAM (Future Resource Adapted Pulp Mill) and the results …

    chalmers Repository record for Opportunities for improved heat integration in average Scandinavian kraftliner mills: A pinch analysis of a model mill (opens in a new tab)

  13. Automated retrofit of heat exchanger networks

    … Reducing process heat demand often centres on retrofitting the heat exchanger network to improve heat recovery and lower the hot utility consumption. This thesis presents a comprehensive automated retrofit design method for heat exchanger networks, fulfilling several gaps in current knowledge. …

    waikato-masters Repository record for Automated retrofit of heat exchanger networks (opens in a new tab) Download file for Automated retrofit of heat exchanger networks (opens in a new tab)

  14. Addressing data informativeness in risk-conscious building performance simulation applications

    … in fault detection, operations management, and retrofit analysis. An extensive review of BPS model calibration and validation studies reveals two major research gaps. First, contemporary model calibration practice calls for an effective and robust method that can systematically incorporate a …

    gatech Repository record for Addressing data informativeness in risk-conscious building performance simulation applications (opens in a new tab)

  15. A new integrated procedure for energy audits and analyses of buildings

    … consumption of a building can be saved through retrofit studies. However, to capitalise on these opportunities, the ESCOs require tools and procedures that would enable them to accomplish energy savings studies quickly and efficiently. It should be a holistic approach to the typical ESCO …

    nwu-za Repository record for A new integrated procedure for energy audits and analyses of buildings (opens in a new tab)

  16. Optimal residential energy consumption, prediction, and analysis

    … use and generate energy. This work presents an analysis of a unique dataset of 4971 energy audits performed on homes in Austin, Texas in 2009 - 2010. The analysis quantifies the prevalence of typical air-conditioner design and installation issues such as low efficiency, oversizing, duct leakage, …

    texas Repository record for Optimal residential energy consumption, prediction, and analysis (opens in a new tab)