Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"Rib Turbulators"”.
-
Experiments and simulation of shaped film cooling holes fed by crossflow with rib turbulators
… crossflow channel. In this study, angled rib turbulators were installed in two geometric configurations inside the internal crossflow channel, at 45° and 135°, to assess the impact on film cooling effectiveness. Film cooling hole inlets positioned in both pre-rib and post-rib locations …
-
Computation of heat transfer in turbine rotor blade cooling channels with angled rib turbulators
… and walls with 45 degree angled and V-shaped rib turbulators were investigated numerically using an unstructured, incompressible, Reynolds-averaged Navier-Stokes flow solver. The influence of 45 degree angled ribs and channel orientation on the local Nusselt number ratios for leading and …
-
Heat Transfer Enhancement in Rectangular Channel with Compound Cooling Techniques
… the greatest heat transfer. Combinations of rib turbulators as well as pin0fins were used in different configurations in order to analyze heat transfer and pressure loss characteristics to determine which configuration had the overall best performance. Two different flow configurations were …
-
Heat Transfer in Stationary and Rotating Coolant Channels Using a Transient Liquid Crystal Technique
… method, multipass coolant channels with rib turbulators, large diameter radially outward channels with rib turbulators, and jet impingement cooling schemes are studied during rotation. 90deg, W, and M-shaped rib enhancements are studied and detailed heat transfer measurements clearly …
-
Experimental and computational investigation of turbine cooling designs incorporating a thermal barrier coating
… film cooling and internal cooling enhanced with rib turbulators separately as well as part of an integrated design incorporating a TBC. The design and construction of a matched-Biot number test section is discussed along with an evaluation of uncertainty. Enhanced internal cooling was found to …
-
Effect of rib spacing on heat transfer and friction in a rotating two-pass rectangular (AR=1:2) channel
… in a channel for different spacing of the rib turbulators. Those ribs are put on the surface in the two pass rectangular channel with an aspect ratio of AR=1:2. The cross section of the rib is 1.59 x 1.59 mm. Those ribs are put on the leading and trailing walls of the channel with the angle …
-
Detailed Heat Transfer Measurements of Various Rib Turbulator Shapes at Very High Reynolds Numbers Using Steady-state Liquid Crystal Thermography
… turbine blades feature serpentine passages where rib turbulators are installed to enhance heat transfer between the relatively colder air bled off from the compressor and the hot internal walls. Most of the prior studies have been restricted to Reynolds number of 90000 and several studies have …
-
Detailed Understanding of Flow, Heat Transfer, and Pressure Drop Behavior in a Square Channel With 45 Deg Ribs
Internal Duct Cooling (IDC) with rib turbulators is one of the common cooling techniques applied inside the turbine airfoils. It is very important for the gas turbine industry to design and develop an optimized cooling channel that maximizes the amount of heat removed, while simultaneously …
-
The Effect Of Heat Transfer Coefficient On High Aspect Ratio Channel Accompanied By Varying Rib Aspect Ratio
… aspect ratio channels, (1:8) and (1:4). Rib turbulators were used as a flow disruptor scheme to enhance the heat transfer and friction factor. Rib aspect ratios ranging from (1:1) to (1:5) rib-height-to-width ratio were used. The first channel rib-width-to-pitch (Wr/P) ratio was kept at …
-
Aspect ratio effect on heat transfer in rotating two-pass rectangular channels with smooth walls and ribbed walls
… surface conditions: smooth walls and 45?? angled ribbed walls. The channel aspect ratios include 4:1, 2:1, 1:1, 1:2 and 1:4. Four Reynolds numbers are studied: 5000, 10000, 25000 and 40000. The rotation speed is fixed at 550 rpm for all tests, and for each channel, two channel orientations are …
-
Turbine Blade Internal Cooling: Trailing Edge, Coolant-Passage Entry, Bend Effect and Improvement in Thermal Performance
… channel. Different shapes and arrangements of rib turbulators were studied over the last few decades to enhance local turbulence close to the hot gas turbine blade wall and promote secondary flow close to the wall. A combination of angled grooves and angled ribs are used to find the heat …
-
Heat Transfer at Turn Portion of Rotating Multi-Pass Internal Cooling Channels of Gas Turbine Blades
… smooth channel surface. Roughened surface with rib turbulators and pin-fin array is also tested. Tests are conducted for both cases of with and without turning vane at the turn portion. Range of Reynolds numbers is from 10,000 to 40,000, and the corresponding rotation number is from 0 to 0.32. …
-
Numerical simulation of flow and heat transfer of internal cooling passage in gas turbine blade
… is a rotating rectangular channel with V-shaped ribs. The channel aspect ratio (AR) is 4:1, the rib height-to-hydraulic diameter ratio (e/Dh) is 0.078 and the rib pitch-to-height ratio (P/e) is 10. The rotation number and inlet coolant-to-wall density ratio were varied from 0.0 to 0.28 and from …
-
The impact of temperature ratio on the overall cooling performance of conjugate cooled configurations
… cooling design and 45° V-shaped broken rib turbulators to enhance the coupling of the internal and external systems.</p> <p>From CFD studies, adiabatic film effectiveness was found to increase with increasing mainstream- to-coolant temperature ratio. The percentage change in adiabatic …
-
Development of Advanced Internal Cooling Technologies for Gas Turbine Airfoils under Stationary and Rotating Conditions
… cooled by jet impingement which cross-over the rib turbulators in the feed chamber. The mid-chord section of the turbine airfoils have serpentine passages connected via. 180° bends, and they feature turbulence promotors which enhance the heat exchange rates between the coolant and the internal …
-
Heat Transfer Performance Improvement Technologies for Hot Gas Path Components in Gas Turbines
… usually roughened with turbulence promoters like ribs to enhance heat transfer. Though the ribs help in augmenting the heat transfer, they have an associated pressure penalty as well. Therefore, it is important to study the thermal-hydraulic performance of ribbed internal cooling passages. The …
-
Optimization and characterization of integrated cooling circuit for gas turbine cooling
… of the study investigated the optimum internal rib configuration to be used with a serpentine channel. Three rib configurations were considered: -60°, 90°, and +60° ribs. Computational simulations predicted that -60° ribs would reduce pressure drop compared to the smooth channel. Flow field …
-
Experimental measurements of conjugate heat transfer on a scaled-up gas turbine airfoil with realistic cooling configuration
… conducting models allowed for the individual contributions of the internal convective cooling and external film cooling to the overall cooling scheme to be quantified. Surface temperature and thermal field measurements above the wall were also performed on a film cooled adiabatic model. For the …