Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 558 for “"Ribs"”.

  1. Aerodynamics of surface-mounted ribs

    The flow over ribs consists of a forward-facing step followed by a backward-facing step. The interaction between the aerodynamics of these two canonical obstacles leads to complex patterns in an oscillating flow which depend on rib length. In order to study the aerodynamics of ribs, four steps were …

    soton Download PDF for Aerodynamics of surface-mounted ribs (opens in a new tab)

  2. Microstructural and Mechanical Properties of Human Ribs

    … study was to investigate the strength of human ribs subjected to dynamic three-point bending. A total of four human cadavers were utilized by removing 16 rib sections from the right side of each thorax. One or two sections were removed from a single rib at the lateral, anterior and posterior …

    vt Repository record for Microstructural and Mechanical Properties of Human Ribs (opens in a new tab)

  3. The economic significance of extra ribs in pigs

    Thesis (M.S.)--Michigan State College of Agriculture and Applied Science. Department of Zoology, 1934

    msu Repository record for The economic significance of extra ribs in pigs (opens in a new tab)

  4. Blunt Force Trauma to the Ribs: Creating Predictive Models

    … biological profile. Blunt force trauma to the ribs is some of the most common trauma recorded in a medical examiner's setting, however the structural complexity of ribs make it difficult to move beyond descriptive documentation of injuries. The purpose of this study is to identify common rib …

    unr Repository record for Blunt Force Trauma to the Ribs: Creating Predictive Models (opens in a new tab)

  5. Performance of cross-flow energy recovery ventilators with angled ribs

    … a modified cross-flow ERV incorporating angled ribs in the open channel to enhance heat and mass transfer. A combined numerical and experimental approach was employed to evaluate the effectiveness improvement and associated pressure drop penalty of the proposed geometry. Computational fluid …

    ubc Repository record for Performance of cross-flow energy recovery ventilators with angled ribs (opens in a new tab) Download PDF for Performance of cross-flow energy recovery ventilators with angled ribs (opens in a new tab)

  6. Computational and Experimental Investigation of Mass Reduced Aircraft Wing Ribs

    … a novel design of mass reduced aircraft wing ribs through the topology optimization method. For comparison, the same examination is performed on ribs with normal internal geometry. The wing rib design is based on that of the Gulfstream G650 transonic jet. The rib was divided into three …

    gsu Repository record for Computational and Experimental Investigation of Mass Reduced Aircraft Wing Ribs (opens in a new tab)

  7. The Biomechanical Contribution of the Free Floating Ribs: A Pilot Study

    … condition of the specimen. Clinically, floating ribs have been removed for procedures for cosmetic purpose or surgical repair. The understanding of the floating ribs in human cadaveric testing is limited and has never been quantified. The present study aims to examine the mechanical effects of …

    ku Repository record for The Biomechanical Contribution of the Free Floating Ribs: A Pilot Study (opens in a new tab)

  8. Analysis of Heat Transfer on Turbulence Generating Ribs using Dynamic Mode Decomposition

    Ducts with turbulence-promoting ribs are common in heat transfer applications. This study uses a recent modal extraction technique called Dynamic Mode Decomposition (DMD) to determine mode shapes of the spatially and temporally complex flowfield inside a ribbed duct. One subject missing from …

    ucf Repository record for Analysis of Heat Transfer on Turbulence Generating Ribs using Dynamic Mode Decomposition (opens in a new tab)

  9. Experimental Study of Turbulent Flow over Inclined Ribs in Adverse Pressure Gradient

    … elements used were two-dimensional square ribs of nominal height k = 3 mm. The ribs were secured to the lower wall of the channel and spaced to produce the following three pitches: 2k, 4k and 8k, corresponding to d-type, intermediate and k-type rough walls, respectively. For each rough wall …

    manitoba Repository record for Experimental Study of Turbulent Flow over Inclined Ribs in Adverse Pressure Gradient (opens in a new tab)

  10. Effect of the number of ribs on the aircraft wing gross weight

    … influence of the number of uniformly distributed ribs along the span of a two spar wing on the wing gross weight. The project is mainly concerned with the preliminary design of an Ultra Light Aircraft (ULA) or Very Light Aircraft (VLA) wing structure, when the structures engineers have no clear …

    glasgow Download PDF for Effect of the number of ribs on the aircraft wing gross weight (opens in a new tab)

  11. Evaluation of primary stability in bovine ribs following a correction in placement depth

    … bone level implant) were placed into two bovine ribs. Implants were divided into two groups with nine in each group and were either backed out or advanced. The primary stability was assessed using an Osstell Mentor device following each quarter turn, until a full turn had been completed. Data was …

    wvu Repository record for Evaluation of primary stability in bovine ribs following a correction in placement depth (opens in a new tab)

  12. Structural Modeling and Optimization of Aircraft Wings having Curvilinear Spars and Ribs (SpaRibs)

    … direction, carrying the flight loads and ribs which are panels with holes attached to the spars to preserve the outer airfoil shape of the wing. Kapania et al. at Virginia Tech proposed the concept of reducing the weight of aircraft wing using unconventional design of the internal …

    vt Repository record for Structural Modeling and Optimization of Aircraft Wings having Curvilinear Spars and Ribs (SpaRibs) (opens in a new tab)

  13. Vibration Analysis of a Composite Wing Box with Arbitrarily Shaped Spars and Ribs

    … composite wing boxes with curvilinear spars and ribs is performed. Modern manufacturing technologies, such as Electron Beam Freeform Fabrication and Friction Stir Welding, have allowed the manufacturing of arbitrarily shaped stiffeners. Curvilinear stiffeners provide flexibility in design as they …

    embry-riddle Repository record for Vibration Analysis of a Composite Wing Box with Arbitrarily Shaped Spars and Ribs (opens in a new tab)

  14. Flexural Behaviour of Sandwich Panels Composed of Polyurethane Core and GFRP Skins and Ribs

    … (GFRP) skins. Panels with and without GFRP ribs connecting the skins have been studied. While the motivation of the study was to develop new insulated cladding panels for buildings, most of the work and findings are also applicable to other potential applications such as flooring, roofing …

    queens Repository record for Flexural Behaviour of Sandwich Panels Composed of Polyurethane Core and GFRP Skins and Ribs (opens in a new tab)

  15. Large Displacement Analysis and Design of Stiffened Plates with Parallel Ribs in Large Industrial Ducts

    … behaviour of stiffened plates with parallel ribs could be different under positive and negative pressures as the membrane forces generated in the panel plate would affect the overall behaviour of the stiffened plate differently. The third phase of the thesis provides means for obtaining the …

    concordia Download PDF for Large Displacement Analysis and Design of Stiffened Plates with Parallel Ribs in Large Industrial Ducts (opens in a new tab)

  16. The calculation of flow and heat transfer over surface mounted ribs using a domain decomposition method

    A numerical study of the accuracy and simulated parallel efficiency of domain decomposition applied to a finite volume fluid flow solver is presented. Two test cases were studied, developing flow in a channel and flow over a surface mounted rib, each with several subdomain configurations. Three …

    uvic Repository record for The calculation of flow and heat transfer over surface mounted ribs using a domain decomposition method (opens in a new tab)

  17. The influences of V-shaped ribs and spanwise system rotation on a turbulent square duct flow

    … thesis, the effects of surface-mounted V-shaped ribs and spanwise system rotations on fully-developed turbulent square duct flows were investigated using the particle image velocimetry (PIV) measurement, large-eddy simulation (LES) and direct numerical simulation (DNS). The PIV measurements were …

    manitoba Repository record for The influences of V-shaped ribs and spanwise system rotation on a turbulent square duct flow (opens in a new tab)

  18. Effects of blade angle on the force and work during sharp force trauma of porcine ribs

    … 0°, 45° and 90° relative to the long axis of the ribs. The results indicate that the angle of the blade does affect the force and work required to create bony injuries. Therefore, the blade angle needs to be considered in forensic analyses.

    laurentian Repository record for Effects of blade angle on the force and work during sharp force trauma of porcine ribs (opens in a new tab)

Page 1 of 28