Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"Risk of cracking"”.
-
Early-age thermal stress analysis of concrete
Early-age thermal cracking is major concern in massive concrete elements, which is associated with heat of cement hydration and time dependent material properties at early age. The key point is to predict the risk of cracking in mass concreting using reliable material models and methods for …
-
Mechanical properties of heat-treated and hot-dip galvanized rectangular hollow section material
… is widely used for corrosion protection of steel structures. However, there has been a plethora of recent reports on premature cracking in galvanized steel structures, which have resulted in some early decommissions or even hazardous collapses. This research focuses on cold-formed …
-
Onset of selective laser flash sintering in 8YSZ
Flash sintering of ceramics is distinguished by rapid sintering during simultaneous application of electric field and heat. Previous studies of flash sintering have been conducted in furnace environments, where sample temperatures are approximately uniform. Selective Laser Flash Sintering (SLFS) …
-
Effects of Mix Design Using Chloride-Based Accelerator on Concrete Pavement Cracking Potential
… driving conditions for motorists. Replacement of cracked pavement slabs can interrupt traffic flow in the form of lane closures. In Florida, the traffic demands are high and pavement repairs need to be carried out swiftly typically using concrete with high cement contents and accelerators to …
-
Early Volume Change of High Performance Concrete
… durable concrete, but this usually requires use of concretes with high cementitious binder contents that increase the risk of cracking due to thermal, autogenous, and drying shrinkage. Cracking is counter-productive to obtaining durability in the field. High performance concrete (HPC) can be …
-
The risk of early-age thermal cracking using concrete with high GGBS content: A parametric study of two concrete mixes for a wall-to-slab section
… possible cement reduction and incorporation of supplementary cementitious materials (SCM), is one necessary measure to reduce the carbon footprint of the built environment. In Sweden, one of the most used SCMs is slag, a by-product from steel production. Although the availability of slag is …
-
The Determination Of The Concrete Tensile Creep At Early Age Using The Ring Test
… model is used to determine the tensile creep of concrete at an early age based on the ASTM C1581 restrained shrinkage ring test. Three concrete mixes using Ordinary Portland Cement (OPC) were tested. The three concrete mixes were cast, and each underwent the ring tests up to cracking. …
-
Restrained shrinkage behaviour of rapid hardening fibre reinforced concrete repairs
The functionality and durability of concrete overlays is compromised by delamination and large cracks that result from excessive shear and tensile stresses due to restrained shrinkage. Expansive cements could mitigate shrinkage problems, but as they are usually brittle, they still develop cracks …
-
Proportioning and Performance of Ultra-High Performance Concrete (UHPC) for High Friction Surface Treatment (HFST) on Pavement and Bridge Decks
… technique used to improve pavement’s coefficient of friction, to enhance roadway safety. The application of HFSTs has repeatedly demonstrated the ability to significantly reduce crashes in both wet and dry conditions. Typically, epoxy-resins and calcined bauxite aggregate are used in HFST …
-
Constitutive models for the material nonlinear analysis of concrete structures including time-dependent effects
… significantly due, mainly, to the development of self-compacting concrete, ultra-fluid cement based materials, high performance fiber reinforced concrete and engineered cement composites. These developments have their main applicability in the pre-casting industry, where the earliest demoulding …
-
Assessing the autogenous shrinkage cracking propensity of concrete by means of the restrained ring test
The autogenous shrinkage due to self-desiccation of high- and ultra-high performance concretes with very low water-cement ratio in case of restraint leads to considerable stresses starting from very early age. The resultant risk of cracking presently cannot be adequately investigated. Parameters …
-
Assessment of Mass Concrete Thermal Prediction and Failure Criteria: Novel Models, Evaluation Methods, and Case Studies
The durability of massive concrete structures may be compromised by delayed ettringite formation (DFE) and thermal cracking. These issues are the result of the high internal temperatures and temperature differences that develop within the concrete elements during curing as a result of the heat of …
-
Superabsorbent polymers and nanosilica for mitigation of autogenous shrinkage and promotion of self-healing of cementitious materials
… and robust materials require the adaptation of the construction industry. Moreover, the increasing concern about global warming results in challenges regarding the extensive use of Portland cement, being the source of around 8% of the world’s carbon dioxide emissions. Over the last years, a …